 The Adcom GTP-602 Stereo tuner-preamplifier is loaded with superior product features. It includes Class A BiFET analog circuitry, 100kHz audio bandwidth for high-resolution audio and RDS AM-FM tuner with 24 direct access presets. The GTP-602 includes one phono stage input, a unique feature not commonly found in tuner-pre-amplifiers today. The GTP-602 also offers four stereo analog inputs, three pairs of main stereo outputs and one pair fixed level tape output to track main source selection. System controls feature RS232 advanced interface, all discrete IR commands, dual rear panel IR inputs, dual 12-volt trigger outs and remote control with source control. FeaturesRDS AM/FM Stereo Tuner with 24 PresetsPhono Stage Input 4 Stereo Inputs 3 Stereo Preamp Outputs and 1 Stereo Fixed Output RS232, Discrete IR Codes, 2 IR Inputs 2 x 12-Volt Trigger Outputs Two year limited manufacturer warranty SpecificationsInput Impedance Audio 47kOutput Impedance Audio 550 Frequency Response 20Hz to 20kHz } 0.2dB THD+Noise at Rated Output 20Hz to 20kHz 0.005% IM Distortion CCIF at 15kHz and 16kHz 0.004% Signal to Noise Ratio (at 1kHz gAh weighted) Ref. to 1V input, max output voltage > 105dB Sensitivity 1 volt output 170mV Subwoofer Crossover Frequency 100Hz Crosstalk (@ 1kHz) > 80dB Maximum Output Voltage 5.0V Tone Controls (L and R front only) Bass effective below 400Hz Bass Max Gain/Cut +8dB/-10dB @ 20Hz Treble effective above 1.5kHz Treble Max Gain/Cut +8dB/-10dB @ 20Hz FM Tuner Usable Mono Sensitivity 15dB 50 dB Mono Quieting Sensitivity 22dB 50 dB Stereo Quieting Sensitivity 39dB A-wtd. Signal to Noise Ratio Mono 75dB, Stereo 70dB Stereo Separation (1 kHz) 43dB Alternate Channel Selectivity >50dB Capture Ratio 2dB Power (user selectable 120/230 VAC) 120VAC/50-6OHz Chassis Dimension 3.5h (89mm) x 17w (432mm) x 14.75d (375mm) Maximum Dimensions 4h (102mm) x 17w (432mm) x 16.5d (419mm) Weight 15 lbs. (6.8kg) Weight, Packed 20 lbs. (9.1kg) |
