AVHiFi Product Data Feed

Adcom GFA-7605 5-Channel Amplifier

125 watts x 5 channels into 8 ohms, 175 watts x 5 channels into 4 ohms, Power rig circuit topology, Gold Plated 5 way binding posts, Huge toroidal transformers, Power bandwidth 10 Hz –100kHz, 12 volt trigger on circuit, Two year limited manufacturer warranty

Adcom GFA-6002 Stereo Amplifier

The Adcom GFA-6002 is a 70 Watt x 2 stereo power amplifier that can be bridged to 175 Watts into 8 Ohms mono and has custom-installation features such as rear panel level controls and 12-Volt triggering.

Adcom GFA-555se Stereo Amplifier

The classic award winning amplifier design of the original Adcom GFA-555mkII has been reborn. Externally, the chassis footprint and front panel design are identical to the original. Internally, all circuitry has been upgraded to meet ETL-ETLc, FCC, LVD and CE-EMC requirements using UL approved FR-4 printed circuit boards. High performance component selections include ultra low ESR electrolytic capacitors. The result of these improvements is lower distortion, better dynamic range, improved damping factor and greater stability and separation of individual instruments on the sound stage.

Adcom GFA-555ms Stereo Amplifier

The GFA-555ms is a very powerful amplifier capable of delivering very large peaks into low impedance. To achieve this, eight sets of specially selected TO-3-type, metal-cased bipolar output transistors are used in the GFA-555ms in a triple-Darlington configuration of its driver and output stages. The safe operating area of these transistors, along with their circuit topology, insures very efficient power delivery to reactive loads, regardless of the phase angle of voltage and current. In addition, no protection or current-limiting circuitry is used in the GFA-555ms which could degrade the signal.

Adcom GTP-602 Preamplifier - Tuner

The Adcom GTP-602 Stereo tuner-preamplifier is loaded with superior product features. It includes Class A BiFET analog circuitry, 100kHz audio bandwidth for high-resolution audio and RDS AM-FM tuner with 24 direct access presets. The GTP-602 includes one phono stage input, a unique feature not commonly found in tuner-pre-amplifiers today. The GTP-602 also offers four stereo analog inputs, three pairs of main stereo outputs and one pair fixed level tape output to track main source selection. System controls feature RS232 advanced interface, all discrete IR commands, dual rear panel IR inputs, dual 12-volt trigger outs and remote control with source control.

Adcom GFP-815 Stereo Preamplifier

The new Adcom GFP-815 supports a broad audio spectrum from 10Hz to 100kHz for high level sources and 20Hz to 80kHz for phono input. The GFP-815 is designed to capture all the fidelity that high resolution audio has to offer, with precision broadband components and an ultra low noise floor. This new ADCOM preamp hasn’t forgotten about your legacy or new components and provides you with support for source products ranging from turntables to MP3 players. Pair the GFP-815 with an ADCOM power amp and rediscover the magic of two channel audio.

Adcom GFS-600 6-Room Speaker Selector

The Adcom GFS-600 is a high power speaker selector that switches up to 6 pairs of loudspeakers. It features gold 5-way binding post terminals, selectable protection circuit for driving multiple pairs of speakers, and supports up to 200 Watts per channel.

Atlantic Technology 1400C Center Channel Speaker (Gloss Black)

The perfect center channel companion for the 1400 system, this speaker employs a closely-grouped M-T-M driver array for optimum coverage of the listening area. In addition, as with all of our center channel speakers, the 1400 C comes with a unique tilting base so the speaker is always precisely aimed at your ears. This aiming capability ensures high intelligibility of voices, dialogue, and on-screen effects.

Atlantic Technology 1400C Center Channel Speaker (Satin Black)

Atlantic Technology 1400LR Speaker (Gloss Black) - Each

The Model 1400 LR Front Channel Speaker is a high-performance 2-way system intended for use with a quality subwoofer, such as the Atlantic Technology model 224 SB box-type subwoofer. Each speaker contains an advanced GLH (Graphite Loaded Homopolymer) 4.5” (115mm) woofer and Atlantic's exclusive 1” (25mm) Low-Resonance soft dome tweeter (LRT) with a powerful neodymium magnet structure. The speaker components are mounted in an acoustically inert MDF enclosure, with each speaker magnetically shielded so it can be placed close to a CRT-type TV set or magnetic media without concern for stray magnetic fields distorting the picture or causing damage. These versatile speakers are equally suited for LR satellite, center or surround applications.

Atlantic Technology 1400LR Speaker (Satin Black) - Each

Atlantic Technology 1400SRz Surround Speakers - Pair

The ideal speaker system for smaller home theaters. The System 1400 utilizes sophisticated mid-woofers and Atlantics exclusive Low Resonance Tweeter to produce exciting, articulate, realistic sound, very much in the tradition of our award-winning System 8200e. All the components of the System 1400 deliver sound that's totally unexpected for this size product, with unprecedented mounting and placement flexibility.

Atlantic Technology 224SB Powered Subwoofer

Sealed, acoustic-suspension bass-alignment delivers superior transient response and lower distortion. High-current amplifiers for outstanding headroom and output. Atlantic's exclusive CFT (Clear Filter Technology) ensures clean, articulate performance. Convenient front-panel level controls. Elegant curved side panels convey style and grace.

Atlantic Technology 2400C Center Channel Speaker - Gloss Black

The 2400 C is designed to be placed horizontally and features an advanced tilting base to provide optimum sonic coverage of the listening area even when mounted higher or lower than the listener is seated. A hallmark of Atlantic Technology speaker systems has always been the unusual vocal intelligibility they offer. Like all of our center channel speakers, Atlantic has included acoustic compensation controls which allow the listener to fine tune the speaker's response for varying placement situations or room acoustics.

Atlantic Technology 2400C Center Channel Speaker - Satin Black

Atlantic Technology 2400LR Speakers - Gloss Black Pair

The Model 2400 LR Front Channel Speakers are high-performance 2-way systems intended for use with a high quality subwoofer, such as the Atlantic Technology Model 422 SB box-type subwoofer. Each speaker contains two advanced GLH (Graphite Loaded Homopolymer) 4.5” (115mm) woofers and Atlantic's exclusive 1" (25mm) Low Resonance Tweeter, which delivers ultra-wide midrange dispersion for uniform coverage of the entire listening area.

Atlantic Technology 2400LR Speakers - Satin Black Pair

Atlantic Technology 2400SR Surround Speakers - Pair

The Model 2400 SR Dipole/Bipole Surround Speakers are intended for use in multi-channel audio/video sound systems as dedicated side or back surround channel speakers. Each 2400 SR enclosure features a 1 soft dome tweeter and the same midrange driver found in the 2400 front LR speakers. The surround speakers can be switched between Dipole and Bipole operation for maximum flexibility when used with high resolution music sources or for conventional surround effects to mimic the surround array found in commercial movie theaters.

Atlantic Technology 334SB Powered Subwoofer

Atlantic Technology 4400C Center Channel Speaker (Gloss Black)

For accurate reproduction of a multi-channel soundtrack, the three front-channel speakers must have the same sonic signature, which is why Atlantic engineers designed the 4400 C center channel speaker with the exact same driver complement as the matching 4400 LR speakers. They are both designed for use with a dedicated subwoofer, and the 4400 C includes the same unique acoustic controls as the 4400 LR.

Atlantic Technology 4400C Center Channel Speaker (Satin Black)

Atlantic Technology 4400LR Speakers - Pair (Gloss Black)

THX Select Model 4400 LR Front Channel Speakers are high-performance 2-way systems intended for use with a quality subwoofer, such as the THX Select Atlantic Technology Model 642e SB. Each 4400 LR contains two proprietary GLH (Graphite Loaded Homopolymer) 5.25" (135mm) midrange woofers, and an audiophile reference 1" (25mm) ferrofluid-cooled, damped silk dome tweeter, with a powerful neodymium magnet structure. The 4400 LR is available in High Gloss Black or Satin Black. The 4400 features a flush rear terminal cup and dual keyholes, for wall-mounting capability.

Atlantic Technology 4400LR Speakers - Pair (Satin Black)

Atlantic Technology 4400SR Surround Speakers - Pair

The Model 4400 SR Dipole-Bipole Surround Speakers are purpose built for use in multi-channel audio/video sound systems as dedicated side or back surround channel speakers. The 4200 SR enclosure has two 4.5” (115mm) GLH woofers and two identical high performance silk dome tweeters as found in the 4400 LR front speakers. To further showcase the 4200 SR’s flexibility, the 4400 SR can be easily switched between Dipole and Bipole operation.

Atlantic Technology 444SB Powered Subwoofer

Atlantic Technology 6200e-C Center Channel Speaker

The 6200e C features the following rear mounted acoustic optimization controls. A 3-position High Frequency Energy switch (changes the tilt of the tweeters response, not simply how loudly the tweeter plays). This allows much improved matching of the speaker's response to different room environments. Whether you have an acoustically live (highly reflective) or dead (highly absorptive) room, you can correct for varying acoustics. A Location Selector switch shelves up both the upper midrange and the high frequency output to compensate for being located behind a perforated screen or theater curtains, providing unrestricted detail at the listening position. A Boundary Compensation control adjusts for placing the speakers in custom cabinets or directly adjacent to a TV, delivering open and natural sound.

Atlantic Technology 6200e LR Speakers - Each

The 6200e LR features the following rear mounted acoustic optimization controls. A 3-position High Frequency Energy switch (changes the tilt of the tweeters response, not simply how loudly the tweeter plays). This allows much improved matching of the speaker's response to different room environments. Whether you have an acoustically live (highly reflective) or dead (highly absorptive) room, you can correct for varying acoustics. A Location Selector switch shelves up both the upper midrange and the high frequency output to compensate for being located behind a perforated screen or theater curtains, providing unrestricted detail at the listening position. A Boundary Compensation control adjusts for placing the speakers in custom cabinets or directly adjacent to a TV, delivering open and natural sound.

Atlantic Technology 642e SB Powered Subwoofer - Gloss Black

The Atlantic Technology 642e SB THX Select powered subwoofer is a significant upgrade from its highly acclaimed predecessor. Compared to the original 642, we have developed a totally new driver with three times the motor size, a stiffer spider, and a heavier cone. It's a real "monster" of a driver. While the driver's free-air resonance remains at 25 Hz, the output of the sub from 35 Hz to 60 Hz-right in the impact range- has been improved by almost 3dB.

Atlantic Technology 642e SB Powered Subwoofer - Satin Black

Atlantic Technology 8200e C Center Channel Speaker

Taking center stage, the 8200e C delivers dialogue, music, and special effects with such accuracy you will hear every nuance no matter what the source. Employing the exact same driver set as the 8200e LR's, sounds move seamlessly across the front channels. Incorporating the trademark Atlantic rotating base combined with compensation controls for any placement and room acoustics, the 8200e C provides the ultimate in flexibility and performance for today's high-end installations.

Atlantic Technology 8200e LR Speakers - Each

The 8200e LR's redefine the high-end speaker category with an unbeatable combination of smooth, accurate sound, sophisticated style, and unmatched value in a top-of-the-line system. You can enhance the speakers' performance in any room with the on-board optimization switches that minimize the detrimental effects of speaker placement and room acoustics. Whether you are listening to Schubert or the Stones, or watching Schwarzenegger, with the 8200e LR's you'll appreciate the speaker's ability to capture the explosive dynamics of the latest Hollywood blockbuster or the subtle detail in a classic recording.

Atlantic Technology 8200e SR Surround Speakers - Pair

The 8200e SR are a configurable Dipole (diffuse) Bipole, (semi-diffuse) design featuring dual 5.25-inch woofers (using all the advanced features of the front speakers) and the identical fabric 1-inch dome tweeters as the front satellites. They are finished in a beautiful Satin Black lacquer paint. Optional pedestal stands are also available. For added convenience, the surround speakers can be hung on the wall with the supplied integrated keyhole bracket.

Atlantic Technology AT-1 Tower Speaker - Each

For most audiophiles, listening to a pair of AT-1’s for the first time on demanding material with extremely low bass is a bit of a shock. Loudspeakers of this modest size with a pair of small 5 1/4-inch woofer-midrange drivers just “aren’t supposed to do that”-shake the room. But the AT-1’s deliver that kind of impact. Even at moderate levels, there is a degree of bass power combined with acoustic detail rarely experienced in speakers of any size or price. In the case of the AT-1, hearing is believing.

Atlantic Technology AT-2 Bookshelf Speaker - Each

The compact AT-2 speaker delivers a level of deep bass not previously thought possible from a "bookshelf"-sized speaker. The AT-2's patented H-PAS bass system (Hybrid Pressure Acceleration System) is the reason. It combines elements of several speaker technologies-acoustic suspension, bass reflex, inverse horn, and transmission line-in a unique configuration to deliver powerful low-frequency response that breaks the "Iron Law" of loudspeaker acoustics: the notion that you couldn't have deep bass extension, good system sensitivity and reasonable enclosure size all in one design. H-PAS changes all that.

Atlantic Technology AW-424 Outdoor Speakers - White Pair

Take the great Atlantic Sound outdoors. Utilizing tough, environmentally-resistant materials and state-of-the-art acoustic design, the AW-424 lets you take Atlantic’s famous sound outdoors. All the component parts of the AW-424 have been designed for durability under harsh conditions: UV and impact resistant cabinets, aluminum powder-coated grilles and mounting brackets, and gold-plated speaker terminals.

Atlantic Technology AW-424 Outdoor Speakers - Black Pair

Atlantic Technology FS-3200C Flat Screen Center Speaker

The FS-3200C employs the same driver complement as the FS-3200LR speakers, but in a horizontal arrangement that features a raised tweeter to minimize the off-axis nonlinearities that plague most horizontal center speakers. It can be mounted directly to the wall with keyhole mounts, and also includes a choice of either a straight bracket for mounting perpendicular to the wall, or angle bracket that aims the speaker slightly up (when mounted below the display), or down (when mounted above the display). Lastly, the FS-3200C center channel also includes Atlantic Technology's exclusive rocker base which allows the speaker to be mounted on a shelf or on top of the video display itself, and tilted toward the listening area at any angle needed.

Atlantic Technology FS-3200LR Flat Screen Speakers - Pair

The FS3200 LR speakers form the heart of a home theater loudspeaker system to compliment today’s latest Flat Screen televisions. Their overall size, thin depth and beautiful finish options assure that they will fit appropriately in virtually every installation. However, these speakers have several performance and mounting innovations that make them far more capable than ordinary onwall speakers.

Atlantic Technology FS-4000 Flat Screen Speaker System

Three front-channel theater speakers in one-space-saving enclosure. This sleek, 40"-long unit contains all three front speakers-left, center, and right-in a single enclosure. It's perfect for the growing number of customers who just want a simple, attractive, one-piece speaker solution under their flat-screen television, without all the visual clutter of separate left, center, and right speakers surrounding their stylish, thin TV. Feature List Mounts on wall or on table top for neat, uncluttered appearance. Same Atlantic sound quality as our separate speaker models. Acoustic optimization controls adapt to any room. Includes all wall-mounting hardware. Gloss Black finish.

Atlantic Technology FS-5000 Flat Screen Speaker System

Three front-channel theater speakers in one-space-saving enclosure. Great sound is an integral, essential component to the theater experience at home. The downside for most people comes from having to mount and wire speakers all over their room. It’s inconvenient, confusing, and unsightly. Enter Atlantic’s innovative FS-5000 Front Stage Loudspeaker. Based upon our acclaimed FS-4000, this sleek, 50 -long unit contains three extremely powerful, front speakers-left, center, and right-in a single enclosure. It’s perfect for the person who has a large flat-screen TV in a very big room, and simply wants an attractive, one-piece speaker solution without all the visual clutter of separate left, center, and right speakers.

Atlantic Technology FS-7.1 Surround Sound Bar Speaker System

Real surround sound without all the boxes! The model FS-7.1 Surround Bar Loudspeaker is a highperformance loudspeaker containing all seven home theater channels in a single elegant, slim enclosure. The speaker can be either wall-mounted above or below the video display, or it can be placed on a shelf or in a flat-screen wall mount bracket that has the appropriate speaker adapter.

Atlantic Technology ICTS-6.1-IP In-Ceiling Speaker - Each

The Atlantic Technology ICTS6.1 is a compact ceiling loudspeaker with big sound and high performance that will surprise even critical listeners. It features a long excursion 6 1/2 inch woofer and a pivoting 1 inch silk dome tweeter, coupled with a sophisticated crossover network, rarely, if ever, found on speakers in this price class.

Atlantic Technology ICTS-6HT In-Ceiling Speaker - Each

Top quality front channel theater speaker, hidden in the ceiling. The ICTS-6 HT uses a heavy-duty 6 1/2 inch woofer that is angled 15 degrees towards the listening area, and Atlantic's exclusive 1" Low Resonance Tweeter that handles more of the sound spectrum than any other in-ceiling speaker for unmatched sound coverage. Front mounted Boundary Compensation and Tweeter level controls ensure ideal sound wherever they're mounted. The unique Boundary Compensation Control reduces the undesirable build-up of mid-bass frequencies when the speaker is placed too close to a side wall.

Atlantic Technology ICTS-6.2e In-Ceiling Speakers - Each

The ICTS-8.2e and 6.2e woofers feature carbon loaded mica/poly cones, rubber surrounds, and high-temperature voice coils. The 1 soft dome tweeter is mounted in a clever pivoting housing that lets you direct the high frequencies in any direction for the best sonic effect. A front mounted high-frequency level control rounds out the feature set of these high-performance speakers. Feature List Pivoting tweeter assembly can be directed at listeners for front-channel music/theater use, or directed towards wall for reflective surround use Perfect for when wall-mounting is not a viable option 6 1/2 woofer, with 1 dome tweeter optional back-box.

Atlantic Technology ICTS-6.3e In-Ceiling Speakers - Each

Our most versatile ceiling speakers ever. The ICTS-8.3e and 6.3e TriMode ceiling mount speakers are the perfect high quality, multi-purpose solutions for any surround-sound or whole-house music installations where stealth is a key requirement. Their unique dual voice coil woofers and dual 1 soft-dome tweeters allow them to be configured for mono, stereo, or TriVector(TM) Surround (partial dipole) operation, providing the best coverage for every application.

Atlantic Technology ICTS-6LCR In-Ceiling Speakers - Each

Top quality front channel theater speaker, hidden in the ceiling. The ICTS-6 LCR uses a heavy-duty 6 1/2-inch woofer that is angled 15 degrees towards the listening area, and Atlantic's exclusive Low Resonance 1 tweeter that handles more of the sound spectrum than any other in-ceiling speaker for unmatched sound coverage. A front mounted high-frequency level control rounds out the feature set of these high-performance speakers.

Atlantic Technology ICTS-8.2e In-Ceiling Speakers - Each

Ideal for whole-house audio or as value-oriented surround speaker. The ICTS-8.2e and 6.2e woofers feature carbon loaded mica/poly cones, rubber surrounds, and high-temperature voice coils. The 1 soft dome tweeter is mounted in a clever pivoting housing that lets you direct the high frequencies in any direction for the best sonic effect. A front mounted high-frequency level control rounds out the feature set of these high-performance speakers.

Atlantic Technology IWTS-14LCR In-Wall Speaker - Each

The IWTS-14 LCR combine Atlantic's renowned acoustic performance with the flexibility of being fully compatible with the latest whole-house systems. However, this enhanced system compatibility does not come at the expense of basic acoustic performance. Quite the contrary--these speakers share virtually all of the advanced design and engineering features of our much-lauded IWCB Closed-Box in-walls.

Atlantic Technology IWTS-14SR Surround Speakers - Pair

The IWTS-14 SR are in-wall surround speakers that deliver spacious, enveloping surround effects for top-grade home theater systems. They feature two angled banks of drivers facing front and rear that fill the listening area with the three-dimensional ambient sound essential for convincing, lifelike theater sound.

Atlantic Technology IWTS-155LCR In-Wall Speaker - Each

THX Performance that fits everywhere! (THX pending) The IWTS-155 LCR is a premium-performance in-wall speaker that addresses the need for no-compromise performance with the flexibility to mount either horizontally or vertically in standard 16"-on-center stud-framed walls.It is a perfect solution for retro-fit applications and its small footprint makes it particularly inconspicuous when installed.

Atlantic Technology IWTS-28 In-Wall Subwoofer System

Powerful inwall bass that hides from view. The IWTS28 SUB is an inwall subwoofer that uses dual heavy duty 8 inch woofers to deliver rich, vibrant bass to custom installed audio systems. It is easily retro fitted to existing construction using Atlantic GFR626 grille frame assembly.

Atlantic Technology IWTS-30LCR In-Wall Speaker - Each

THX Ultra 2 Performance (It just happens to be an in-wall.) The IWTS-30 LCR is our top-of-the-line in-wall speaker. It's an exceptionally sophisticated speaker whose lineage traces directly to our highly regarded System 8200e. The 30 LCR is a 3-way design using an 8" woofer, dual 3 1/2" midranges and Atlantic's exclusive LRT tweeter in an M-T-M array.

Atlantic Technology IWTS-30SR In-Wall Surround Speakers - Pair

Both speakers incorporate dual woofers (5 1/4” in the 30 SR) and dual 1” soft dome tweeters. The speakers are switchable Dipole/Bipole designs; that is, the two sets of drivers can either be set for out-of-phase (Dipole) operation, for a diffuse, non-localizable sound, or set for in-phase (Bipole) operation, for a more direct, localizable effect.

Atlantic Technology IWTS-4LCR In-Wall Speaker - Each

This speaker uses a 6 1/2" GLH (Graphite-Loaded Homopolymer) woofer for solid bass down to 57 Hz and Atlantic's renowned 1" soft-dome Low Resonance Tweeter (LRT). Because of its low crossover point, this remarkable tweeter allows the IWTS-4 LCR to deliver much wider midrange dispersion than conventional in-wall speakers for greater placement flexibility, without the severe acoustic and mechanical drawbacks of the so-called pivoting tweeter.

Atlantic Technology IWTS-7LCR In-Wall Speaker - Each

Resonant-free MDF baffles, wide-dispersion Low Resonance Tweeters, and our exclusive Directional Vector Control means that the 7 and 14 LCR stand well above the ordinary. And to make things as convenient as possible, the grille/frame assemblies for the 7 and 14 LCR (the GFR-52 and GFR-525) are packaged and sold separately, to maximize the convenience and timing of the installation.

Atlantic Technology IWTS-8e In-Wall Subwoofer System

Each braced MDF enclosure accommodates a dual 8-inch long-throw woofer assembly, providing roughly the same cone area as a single 12-inch woofer, but with better control and lower distortion. These unique drivers sport a stiff and well-damped Coated Composite Molded Graphite cone, with an unusually strong cone-reinforcing concave dust cap. The vented eight-pound motor and 1.5-inch vented multi-layer voice coil are more typical of those found on a 15-inch driver. Additionally, the baffle is treated with Atlantic's exclusive Resonance Damping Treatment (RDT) to reduce unwanted baffle resonance for clear, articulate bass. SA-380 monoblock amplifier The SA-380 is capable of delivering 380 rock-solid RMS watts for the reproduction of exciting, authoritative theater bass. Its linear power discrete Class G circuitry delivers 380 watts RMS and 550 watts short-term peak power.

Atlantic Technology New Construction In-Ceiling Speaker Bracket

New construction speaker brackets are completely optional and are intended for pre-drywall applications to provide a perfect wall cut-out for Atlantic Technology in-wall speakers.

Atlantic Technology New Construction In-Wall Speaker Bracket

New construction speaker brackets are completely optional and are intended for pre-drywall applications to provide a perfect wall cut-out for Atlantic Technology in-wall speakers.

Atlantic Technology SB-900 Powered Subwoofer

The SB-900 subwoofer is the perfect companion for any Home Theater or compact music system, and it makes an ideal match for a soundbar, such as the Atlantic FS series. Small, unobtrusive and deceptively simple-looking, the SB-900 has a rugged 8” driver with an over-sized surround for exceptionally long excursion and low distortion, even at very high output levels. Drivers of this capability are never found on subwoofers at this modest price.

Atlantic Technology SB-900-DF Powered Subwoofer

The SB-900DF (Down-firing) has its woofer on the bottom panel firing down onto the floor, where it can take best advantage of the acoustical phenomenon of "floor coupling" to reinforce its low frequency response and impact. This is particularly advantageous when placing the 900DF's compact cabinet into tight spaces behind furniture where you don't want the woofer facing right into the back of a sofa, for example.

Atlantic Technology TLC-6.2 In-Ceiling Speaker - Each

Low profile looks with high profile performance. The TLC-6.2 two-way ceiling-mount speakers combine the very best in stealthy trim-bezel looks and high-fidelity sound. Their woofers feature carbon-loaded mica/poly cones, rubber surrounds, and high-temperature voice coils. The 1" soft dome tweeter is mounted in a clever pivoting housing that lets you direct the high frequencies in any direction for the best sonic effect. High-quality, computer-optimized crossovers ensure great sound, and their grilles attach magnetically, easy as can be.

Atlantic Technology TLC-6.3 In-Ceiling Speaker - Each

TLC stands for "Trim Look Ceiling," and these speakers certainly are just that-very trim looking, with no wide plastic bezel, for a particularly attractive, self-effacing look. But they're far more than just a virtually-invisible pretty face.The TLC-6.3 TriMode ceiling mount speakers are the perfect high quality, multi-purpose solutions for any surround-sound or whole-house music installations where stealth is a key requirement. Their unique dual voice coil woofers and dual 1" soft-dome pivoting tweeters allow them to be configured for conventional (mono), single-point stereo, or dipole surround operation, providing the best coverage for every application.

Atlantic Technology TLC-8.2 In-Ceiling Speaker - Each

Low profile looks with high profile performance. The TLC-8.2 two-way ceiling-mount speakers combine the very best in stealthy trim-bezel looks and high-fidelity sound. Their woofers feature carbon-loaded mica/poly cones, rubber surrounds, and high-temperature voice coils. The 1" soft dome tweeter is mounted in a clever pivoting housing that lets you direct the high frequencies in any direction for the best sonic effect. High-quality, computer-optimized crossovers ensure great sound, and their grilles attach magnetically, easy as can be.

Atlantic Technology TLC-8.3 In-Ceiling Speaker - Each

Atlantic Technology WA-50 Wireless Audio System

Perfect for any home entertainment system, the WA-50 has a range of up to 50 meters; 100 meters if it’s line-of-sight. It’s a full-range audio device, and will accurately transmit the full frequency range of the original signal.

Atlantic Technology WA-5030 Wireless Amplifier System

If you want music in another room but don’t want the expense and hassle of running speaker wiring to the remote location, then the WA-5030 wireless amplified system is for you. The WA-5030 System wirelessly transmits a stereo audio signal from one location to a dedicated wireless stereo 30 watt-per-channel amplifier-receiver. The amplifier-receiver is then connected to any general purpose loudspeaker and voila. Music in another room-instantly—without complicated, expensive wiring runs.

Cambridge Audio 551P Phono Pre-Amplifier

The Cambridge Audio 551P follows in the footsteps of its critically acclaimed predecessor, the 540P and has been completely re-tuned to offer even more foot tapping performance. The advanced electronics, which feature high-quality ‘Class A’ amplification circuits and hand-picked components, are housed in a resilient all-metal outer casing featuring a thick brushed aluminum front panel. In line with Cambridge Audio’s commitment to the environment, the new 551P also features a power switch to allow energy consumption to be zeroed when not in use.

Cambridge Audio 651P Phono Pre-Amplifier

For true vinyl fans, a high performance phono pre-amplifier is a must-have to get the best performance from your music. Thankfully, Cambridge Audio has the perfect solution in the shape of the 651P. Adding weight, scale and detail to all your favorite music, our flagship 651P, is a thoroughly reworked and revised replacement for the legendary 640P, which picked-up dozens of awards in its day.

Cambridge Audio DAC Magic 100 Digital Audio Converter

DacMagic 100 is a mini marvel of digital engineering. Designed to significantly improve the sound quality of your existing digital music devices, DacMagic 100 is capable of extracting real hi-fi sound from all manner of gadgets. By simply connecting any device with a digital audio output – like Blu-ray players, Apple Macs, PCs, TVs and set-top boxes – DacMagic 100 digitally processes the audio signal, dramatically improving sound quality and reducing distortion in an instant. The result is greater detail, sparkling clarity and a real sense of scale and drama.

Cambridge Audio DAC Magic Plus Digital Audio Converter

DacMagic Plus works by taking a digital audio signal from your PC, digital iPod dock or TV which it analyses and upgrades using our clever ATF2 algorithm. It’s totally flexible and supports digital music of all formats. DacMagic Plus even supports 24-bit data over USB so you can enjoy better than CD quality from uncompressed music stored on your PC. By connecting our new BT100 to any supported Cambridge Audio product, you can now stream music wirelessly from your iPhone, smartphone, iPad, tablet, laptop or any device that supports Bluetooth to your hi-fi or entertainment system.

Cambridge Audio NP-30 Network Music Player

With the ability to playback 24-bit studio master quality files, the NP30 not only offers every digital music convenience feature, but delivers a better-than-CD experience too! So whether you’re looking to relax to your personal download collection from the best system in the house, want to enjoy the benefits of internet radio or you’re keen to experience your favorite music streaming services without a PC, the NP30 combines the very best in digital music from one neat box.

Cambridge Audio S20 Bookshelf Speakers - Pair

Agility and power are no strangers to the diminutive Cambridge Audio S20. Delivering a deliciously crisp treble and surprisingly deep bass, these neat monitors are ideal for use in smaller rooms, as part of a home cinema set-up or indeed really come to life when connected to a matching S-Series subwoofer.

Cambridge Audio S30 Bookshelf Speakers - Pair

The S30 was a revelation when it was introduced and has been lauded by the world’s hi-fi press. What Hi-Fi Sound and Vision - UK and Stereo - Germany have both given it 5 star reviews. A 4.5-inch composite woven driver controls 100 Watts and delivers a powerful yet controlled bass performance while offering extremely low distortion. This is matched to a soft-dome tweeter featuring a neodymium driver with a state-of-the-art motor system and a critically selected voice coil assembly.

Cambridge Audio S70 Tower Speakers - Pair

The elegant and slimline Cambridge Audio S70 cabinet is carefully braced for maximum rigidity while spiked plinths offer superb stability. The S70 has three-way gold plated bi-wirable terminals and is magnetically shielded for ease of placement.Building on the success of the award-winning S30 bookshelf speaker is the S70 floorstanding loudspeaker which combines excellent treble and commanding bass performance for an outstanding sound.

Cambridge Audio S50 Center Channel Speaker

Cambridge Audio's S50 is a dedicated center speaker which handles the demanding needs of home cinema dialogue. At the heart of this new design lies twin, deceptively powerful, composite bass units. With their phase caps and long throw cones, they help the S50 deliver a strong, powerful sound-stage with excellent front speaker integration.

Cambridge Audio S90 Powered Subwoofer

The S90 sub-woofer is the perfect match for the S30 and S70 speakers. Finished in smooth Graphite with a matching front panel, the S90 sub looks every bit as contemporary as the rest of the S-range. Packing a long-throw 8" bass cone, the S90 may be discreet and compact, but it can certainly pack a punch when needed - right the way down to 40Hz.

Cambridge Audio ES10 Outdoor Speakers - Pair

The Cambridge Audio ES10 outdoor speakers can be discretely situated on the underside of eaves or overhangs so as not to be intrusive and still provide maximum entertainment. Contained within a neat white enclosure, the ES10 outdoor speakers are resilient and weatherproof. They offer impressive performance and are perfect for providing music at barbecues or around pools.

Cambridge Audio WS30 Slim On-Wall Speakers - Pair

The Cambridge Audio WS30 on-wall speaker delivers sonically superb audio from a slim panel design which attaches flush to any wall surface. It’s simply perfect when you require a high performance speaker system but don’t want to fill your living space with obtrusive boxes.

Cambridge Audio Topaz SR-10 Stereo Receiver

The fully-featured SR10 combines a punchy integrated stereo amplifier with an FM/AM RDS tuner. A completely discrete high power amplifier mated to a custom design low flux oversize toroidal transformer instantly reveal its audiophile pedigree – as will its sound – the first time you hear it. And adding to the already weighty specification is a front-mounted connection for your MP3 player or iPod plus a full remote for the perfect armchair experience.

Cambridge Audio Topaz AM-10 Integrated Amplifier

From its sleek brushed aluminum exterior it’s hard to imagine the heavy-duty internal design that’s just waiting to bring your music alive. With a fully discrete power amplifier and oversize toroidal transformer, the AM10 is a real wolf in sheep’s clothes! Five inputs mean you can connect all your favorite devices – CD, TV, DVD, iPod etc. and there’s even an in-built phono stage for instant turntable connection. With all these inputs it’s good to know where you are and the AM10’s neat display gives full source and volume feedback. Finally, a supplied remote means you can make the very most of your music wherever you choose to unwind.

Cambridge Audio Topaz CD-10 CD Player

The CD10 is simply poles apart from its rivals thanks to genuine hi-fi circuitry to truly enhance your music experience. Key to these is double-sided surface-mount technology which has enabled Cambridge Audio’s engineers to employ much shorter signal paths for improved precision and clarity.

Cambridge Audio One Plus Mini CD-FM-iPod System

The Cambridge Audio One Plus features a muscular integrated amplifier producing 30 watts per channel, matched to a premium-grade slot-load CD player with repeat, shuffle and track program functions. It also handles discs containing WMA and MP3 files offering full text readout. Digital music stored on SD cards and USB devices can also be accessed - via a front-mounted card reader or USB connector - and other MP3 players have a dedicated input too.

Cambridge Audio ID-10 iPod Dock with Remote

Cambridge Audio's iD10 iPod docking station enables you to get the most from your iPod by both allowing you to charge it and play music through your home stereo system. Designed to fit most Apple iPods, the smart silver finish looks good with black, white or even the new "Classic" silver iPods.

Cambridge Audio ID-50 iPod Dock with Remote

The iD50 also enables you to watch iPod video through your TV and control it from the comfort of the sofa using navigation on your TV. There’s no better way to make the most of your iPod once you’re home and you’ll be amazed to hear just how much you’ve been missing out on.

Cambridge Audio ID-100 iPod - iPad Dock with Remote

Unlike ordinary iPod docks which at best enhance the iPod’s analogue audio output, the iD100 extracts much purer digital content from your iPod, iPhone or iPad – bypassing the inbuilt analogue conversion circuits. By taking a digital signal, every last drop of detail is fed to an external DAC or AV Receiver where true audiophile quality digital to analogue conversion can take place.

Cambridge Audio Minx Min-10 Speaker - Each

Never before will you have heard such accuracy, detail and realism from a speaker just 8cm square. This beautiful wide dispersion of the Cambridge Audio Minx Min-10 speaker offers superb integration in any home and is designed to mate with your choice of Minx subwoofer.

Cambridge Audio Minx Min-20 Speaker - Each

The Cambridge Audio Minx Min20 takes audio excellence to the next level with a twin BMR driver configuration or even more power and greater dynamic range. Min20 is the ideal choice for larger rooms and offers an amazing hi-fi experience whether you’re listening to soothing classics or a live rock concert!

Cambridge Audio Minx X200 Powered Subwoofer

At just 20cm (9") square, The Cambridge Audio Minx X200 is one of the world’s smallest sub-woofers and is incredibly easy to accommodate. And like all Minx sub-woofers, it features a range of simple controls to allow placement almost anywhere.

Cambridge Audio Minx X300 Powered Subwoofer

Delivering even more punch and deeper bass response, the Minx X300 by Cambridge Audio not only features a 300W digital amplifier, but larger drivers too. Yet despite its technical prowess, it may come as a surprise that the X300 is still far smaller than a typical subwoofer at a mere 28cm (11") square!

Cambridge Audio Minx X500 Powered Subwoofer

With a meaty 500 Watt digital amplifier on board, a 10 inch anodized aluminum power driver and a complementing ABR driver, the Cambridge Audio Minx X500 guarantees home theater thunder combined with audiophile sound quality. Such room enveloping performance might conjure images of something much larger, but like the entire Minx family, the X500 has an amazingly compact footprint offering carefree positioning and easy set-up.

Cambridge Audio Minx S212 2.1 Speaker System

At just 8cm/3 inch square, jaws are guaranteed to drop every time you entertain! Thanks to Minx’s ingenious implementation of BMR technology, these ultra wide bandwidth speakers can handle an extraordinary range of frequencies and work harmoniously with the matching 200 Watt digital active subwoofer to deliver awesome results without eating into your living space.

Cambridge Audio Minx S322 2.1 Speaker System

With the addition of a second drive unit in each satellite speaker, this amazing home stereo package delivers even greater depth and dynamics and instantly reveals its muscle as soon as the music begins. The Cambridge Audio Minx S322 system consists of a Minx X300 Sub-Woofer and two S20 satellite speakers.

Cambridge Audio Minx S215 5.1 Speaker System

With five Cambridge Audio Minx Min10 satellite speakers placed at the front, center and rear of your room and a tiny Cambridge Audio X200 sub-woofer located wherever you wish; this amazing system will instantly transform your living space into a private cinema. Whether you’re watching the grittiest action thriller or engrossed in the big game, you’ll be blown away by Minx's epic delivery and amazed at the amount of bass this tiny set-up can deliver when required.

Cambridge Audio Minx S315 5.1 Speaker System

Whether you’re watching the grittiest action thriller or engrossed in the big game, you’ll be blown away by Minx's epic delivery and amazed at the amount of bass this tiny set-up can deliver when required. With five Cambridge Audio Minx Min10 satellite speakers placed at the front, center and rear of your room and a tiny Cambridge Audio X300 sub-woofer located wherever you wish; this amazing system will instantly transform your living space into a private cinema.

Cambridge Audio Minx S325 5.1 Speaker System

The Cambridge Audio Minx 325 system is also a true ace of bass thanks to an even more potent 300 Watt digital sub-woofer. Developed to engulf even the largest of rooms the amazing Minx 325 system will enrich your love for music and movies like never before. Developed to meet the needs of the most obsessive movie lover, this diminutive 5.1 system puts you right in the heart of the action without having to share your home with ugly black boxes.

Cambridge Audio Minx S525 5.1 Speaker System

Prepare to be blown away! Despite its amazingly compact appearance, the flagship Minx system turns any song, movie or TV program into a truly epic room-filling experience. Designed to power the very largest home cinemas or living space, five slender twin-driver satellite speakers are mated to the flagship 500 Watt Minx sub-woofer with awesome effect.

Canton Ergo 610 On-Wall Speakers - Pair (Cherry)

Canton's Ergo 610 is a two-way speaker featuring a compact, flat design. Able to handle up to 100 watts, each cherry-veneered enclosure houses a 7-inch aluminum wave surround woofer and 1-inch aluminum-manganese tweeter. Integrated wall mounts allow you to put the speakers wherever you want.

Canton Ergo 610 On-Wall Speakers - Pair (White)

Canton Ergo 610 On-Wall Speakers - Pair (Black)

Canton Ergo 620 Bookshelf Speakers - Pair (Cherry)

Canton's Ergo 620 is a two-way speaker featuring a compact design. Able to handle up to 130 watts, each cherry-veneered enclosure houses a 7-inch aluminum wave surround woofer and 1-inch aluminum-manganese tweeter. The Ergo 620 is compatible with Canton's LS 600 and 650 loudspeaker stands.

Canton Ergo 620 Bookshelf Speakers - Pair (Black)

Canton Ergo 620 Bookshelf Speakers - Pair (Wenge)

Canton Ergo 655 Center Channel Speaker (Cherry)

Canton's Ergo 655 is a compact 2-1/2-way center-channel speaker. Able to handle up to 160 watts, each cherry-veneered enclosure houses a 7-inch aluminum wave surround woofer, a 7-inch aluminum wave surround midrange driver, and a 1-inch aluminum-manganese tweeter. The Ergo 655 is compatible with Canton's LS 600 and 650 loudspeaker stands, and is magnetically shielded against interference from nearby audio/visual equipment.

Canton Ergo 655 Center Channel Speaker (Black)

Canton Ergo 655 Center Channel Speaker (Wenge)

Canton Ergo 670 DC Tower Speaker - Each (Cherry)

Canton's Ergo 670 DC is a 2-1/2-way floorstanding speaker. Able to handle up to 170 watts, each cherry-veneered enclosure houses a 7-inch aluminum wave surround woofer and midrange driver, as well as a 1-inch aluminum-manganese tweeter. The Ergo 670 DC features DC technology, which allows the speaker to provide sharp, precise bass reproduction at much lower frequencies than can be attained with conventional crossover designs.

Canton Ergo 670 DC Tower Speaker - Each (Black)

Canton Ergo 670 DC Tower Speaker - Each (Wenge)

Canton Ergo 690 DC Tower Speaker - Each (Cherry)

Canton's Ergo 690 DC is a three-way floorstanding speaker. Able to handle up to 320 watts, each cherry-veneered enclosure houses two 8-inch aluminum wave surround woofers, a 7-inch aluminum wave surround midrange driver, and a 1-inch aluminum-manganese tweeter. The Ergo 690 DC features DC technology, which allows the speaker to provide sharp, precise bass reproduction at much lower frequencies than can be attained with conventional crossover designs.

Canton Ergo 690 DC Tower Speaker - Each (Black)

Canton Ergo 690 DC Tower Speaker - Each (Wenge)

Canton Ergo 695 DC Tower Speaker - Each (Cherry)

Canton's Ergo 695 DC is a three-way floorstanding speaker. Able to handle up to 350 watts, each cherry-veneered enclosure houses two 9-inch aluminum wave surround woofers, a 7-inch aluminum wave surround midrange driver, and a 1-inch aluminum-manganese tweeter. The Ergo 695 DC features DC technology, which allows the speaker to provide sharp, precise bass reproduction at much lower frequencies than can be attained with conventional crossover designs.

Canton Ergo 695 DC Tower Speaker - Each (Black)

Canton Ergo 695 DC Tower Speaker - Each (Wenge)

Canton Ergo SUB-650 Powered Subwoofer (Cherry)

Canton's Ergo AS650.2 is an active front-firing subwoofer. Able to handle up to 350 watts, each cherry-veneered enclosure houses a 12-inch aluminum wave surround woofer. The Ergo AS650.2 features Canton's SC technology, which uses individual filter switches to extend the subwoofer's transmission range by an octave or more, with a consistent, clear sound.

Canton Ergo SUB-650 Powered Subwoofer (Black)

Canton Ergo SUB-650 Powered Subwoofer

Canton In-Ceiling 500 Speaker - Each

The InCeiling-500 features a 5-inch polypropylene woofer and 1-inch directional aluminum tweeter.

Canton In-Ceiling 650 Speaker - Each

The InCeiling-650 features a 6-inch polypropylene woofer and 1-inch directional aluminum tweeter.

Canton In-Ceiling 650DT Speaker - Each

The InCeiling-650 features a 6-inch polypropylene woofer and dual 1-inch directional aluminum tweeters to product both left and right stereo channels in a single speaker.

Canton In-Ceiling 800 Speaker - Each

The InCeiling-800 features an 8-inch polypropylene woofer and 1-inch directional aluminum tweeter.

Canton In-Ceiling 845 Speaker - Each

The InCeiling-845 features a 5-inch aluminum woofer and 1-inch directional aluminum tweeter.

Canton In-Ceiling 865 Speaker - Each

The InCeiling-865 features a 6-inch aluminum woofer and 1-inch directional aluminum tweeter.

Canton In-Ceiling 865DT Speaker - Each

The InCeiling-865DT features a 6-inch aluminum woofer and dual 1-inch directional aluminum tweeters to product stereo sound from a single speaker.

Canton In-Ceiling 880 Speaker - Each

The InCeiling-880 features an 8-inch aluminum woofer and 1-inch directional aluminum tweeter.

Canton In-Wall 500 Speaker - Each

The InWall-500 features a 5-inch polypropylene woofer and 1-inch directional aluminum tweeter.

Canton In-Wall 500LCR Speaker - Each

The InWall-500LCR features dual 5-inch polypropylene woofer and 1-inch directional aluminum tweeter.

Canton In-Wall 650 Speaker - Each

The InWall-650 features a 6-inch polypropylene woofer and 1-inch directional aluminum tweeter.

Canton In-Wall 800 Speaker - Each

The InWall-800 features an 8-inch polypropylene woofer and 1-inch directional aluminum tweeter.

Canton In-Wall 845 Speaker - Each

The InWall-845 features a 5-inch aluminum woofer and 1-inch directional aluminum tweeter.

Canton In-Wall 845SQ Speaker - Each

The InWall-845SQ features a 5-inch aluminum woofer and 1-inch directional aluminum tweeter in a square chassis that can be mounted either in-wall or in-ceiling.

Canton In-Wall 845LCR Speaker - Each

The InWall-500LCR features dual 5-inch aluminum woofers and 1-inch directional aluminum tweeter.

Canton In-Wall 865 Speaker - Each

The InWall-865 features a 6-inch aluminum woofer and 1-inch directional aluminum tweeter.

Canton In-Wall 880 Speaker - Each

The InWall-880 features an 8-inch aluminum woofer and 1-inch directional aluminum tweeter.

Canton Pro House Speaker Bracket - Each

Canton Pro House new construction speaker brackets serve as placeholders and mud rings for Canton Pro House series of in-wall and in-ceiling speakers. Masonry brackets are also available for use in mounting in-wall speakers in brick or block walls. Select Model From Option Box Below.

Canton Movie-90 Home Theater Speaker System

Film buffs everywhere look for good sound in a home cinema system. Our film-ready movie systems have something for every taste and the right solution for every budget so that you can enjoy the full film experience and turn your home cinema evenings into thrilling events.

Canton Movie-130 Home Theater Speaker System

Fitted with fine-tuned HiFi technology, these systems are extremely compact and fit perfectly into any living room. All have high-capacity active subwoofers, which can be adjusted to the precise conditions of the room, and generous centre-channel speakers to carry all the essential information. The compact front and effect loudspeakers are supplied with wall mounts.

Canton Plus MX3 On-Wall Speaker - Each

The Canton Plus MX3 On-Wall Speaker features a 3-inch aluminum cone woofer and 1-inch aluminum dome tweeter.

Canton Plus XS2 On-Wall Speaker - Each

The Canton Plus XS2 On-Wall Speaker features a 4-inch aluminum cone woofer and 1-inch aluminum-manganese dome tweeter.

Canton Plus X3 On-Wall Speaker - Each

The Canton Plus X3 On-Wall Speaker features a 4-inch aluminum cone woofer and 1-inch aluminum-manganese dome tweeter.

Canton Plus XL3 Speaker - Each

The Canton Plus XL3 On-Wall Speaker features a 5-inch aluminum cone woofer and 1-inch aluminum-manganese dome tweeter.

Canton Plus XXL2 Speaker - Each

The Canton Plus XXL2 On-Wall Speaker features a 7-inch aluminum cone woofer and 1-inch aluminum-manganese dome tweeter.

Canton Plus AV-700.2 Center Speaker - Each

The Plus AV-700.2 Center Speaker features dual 4-inch aluminum cone woofer and 1-inch aluminum-manganese dome tweeter.

Canton Plus Plus Media 3 Active Speakers - Pair

The Plus Plus Plus Media 3 Active Speakers features a built-in 20-Watt amplifier, 5-inch cellulose/graphite cone woofer and 1-inch aluminum-manganese dome tweeter. It is designed for use with a CD Player, DVD Player, MD Player, MP3 Player, iPod, PC or Notebook, Playstation or X-Box

Canton Pro X3 Outdoor Speaker - Each

The Canton Pro X3 Outdoor Speaker features a 4-inch wave surround aluminum cone woofer and includes mounting hardware.

Canton Pro XL3 Outdoor Speaker - Each

The Canton Pro XL3 Outdoor Speaker features a 5-inch wave surround aluminum cone woofer and includes mounting hardware.

Canton Pro L2 Outdoor Speaker - Each

The Canton Pro XL3 Outdoor Speaker features two 4-inch wave surround aluminum cone woofer and includes mounting hardware.

Channel Plus 5415 Single Input Digital Modulator

The Model 5415 One-channel Video Modulator has the same output power as the rest of the 5400 series, but it is a quarter of the size. Video and stereo audio inputs are modulated to a programmable TV channel (stereo audio is converted to monaural audio after modulation). The Model 5415 modulator offers video loop-through. A jumper on the Model 5415 terminates the video input at 75 ohms. When the jumper is removed, the input can be looped using a Y adapter to feed the video to a local monitor or VCR. One modulated TV channel Creates a TV channel for a camera or other video source Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64 Push-button digital programming of modulated channel Compatible with DA-8200 and DA-550 series distribution amplifiers 4.6 W x 1.0 H x 3.2 D .

Channel Plus 5425 Two Input Digital Modulator

The Model 5425 Two-channel Video Modulator converts two video and stereo audio inputs to two programmable TV channels (stereo audio is converted to monaural audio after modulation). The Model 5425 modulator offers video loop-through. Jumpers on the Model 5425 terminate the video inputs at 75 ohms. When a jumper is removed, the input can be looped using a Y adapter to feed the video to a local monitor or VCR. Features: Two modulated TV channels Creates TV channels for cameras or other video sources Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64 Push-button digital programming of modulated channels Compatible with DA-8200 and DA-550 series distribution amplifiers 7.9 W x 1.5 H x 5.5 D .

Channel Plus 5435 Three Input Digital Modulators

The Model 5435 Three-channel Video Modulator converts three video and stereo audio inputs to three programmable TV channels (stereo audio is converted to monaural audio after modulation). The Model 5435 modulator offers video loop-through. Jumpers located on the back of the Model 5435 terminate the video inputs at 75 ohms. When a jumper is removed, the input can be looped using a Y adapter to feed the video to a local monitor or VCR. Features: Three modulated TV channels Creates TV channels for cameras or other video sources Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64 Push-button digital programming of modulated channels Compatible with DA-8200 and DA-550 series distribution amplifiers 7.9 W x 1.5 H x 5.5 D .

Channel Plus 5445 Four Input Digital Modulators

The Model 5445 Four-channel Video Modulator converts four video and stereo audio inputs to four programmable TV channels (stereo audio is converted to monaural audio after modulation). The Model 5445 modulator offers video loop-through. Jumpers on the Model 5445 terminate the video inputs at 75 ohms. When a jumper is removed, the input can be looped using a Y adapter to feed the video to a local monitor or VCR. Features: Four modulated TV channels Creates TV channels for cameras or other video sources Channel range: CATV 65-125 (excluding 95-99) and UHF 14-64 Push-button digital programming of modulated channels Compatible with DA-8200 and DA-550 series distribution amplifiers 7.9 W x 1.5 H x 5.5 D .

Conrad-Johnson ET250S Stereo Amplifier

The conrad-johnson Enhanced Triode (ET) Amplifiers are power amplifiers designed to capture the best attributes of both fine vacuum-tube designs and of the best solid-state designs. The ET250S is a 250-watt per channel stereo power amplifier. Power: 250 Watts per channel from 20 Hz to 20 KHz at no more than 2 % THD, both channels driven into 8 Ohms, or 400 watts per channel driven into 4 Ohms. Sensitivity: 1.85V to rated power Frequency Response (at 10 Watts): 20 Hz to 20 kHz, +/- .25 dB Hum and Noise: 104 dB below rated power Input Impedance: 100 kOhms Tube Complement: 2 x 6922 Dimensions: 16.125D x 19W x 7.188H inches Weight: 65 lbs.

Conrad-Johnson ET3 Line Stage Preamplifier

Our new entry-level preamplifier, the ET3, can be expected to set new standards of performance in its market segment. It is distinctly a baby GAT. The family resemblance is much more than skin deep. The line-stage circuit of the ET3 is essentially the same as that of the GAT (a 6922 triode supplies voltage gain, with a MOSFET follower providing an ultra-low output impedance). DC regulators patterned after those used in the GAT provide stable DC voltage to the audio circuits. Finally, and especially noteworthy, the ET3 features a relay operated discrete level-control circuit which is virtually the same as that found in the more expensive GAT and CT5 line stages, absent only the balance adjustment function. For vinyl enthusiasts, the ET3 is optionally available with a phono stage card that borrows its circuitry from our reference quality TEA1 phono stage. Functionally, the ET3 offers the same highly flexible I/O facilities as found in the GAT. There are six separate line-level inputs (including one tape loop), plus a theater loop that facilitates use in a home theater system. And all functions are controllable by the infra-red remote control. Parts quality of the ET3, while not up to the extreme (and unique) standards of the GAT, is extremely high. All capacitors in the audio circuits and related power supplies are constructed with polypropylene dielectric. All resistors are precision metal film. In fact, the ET3 is built to standards that meet or exceed those of many companies’ flagship offerings. For customers seeking an even higher level of refinement, a Special Edition will be available which will include upgraded I/O connectors, PTFE bypass capacitors, and extensive use of Vishay resistors. These two models will replace the conrad-johnson Classic and ET2 preamplifiers. .

Conrad-Johnson ET5 Line Stage Preamplifier

The ET5 is notable for convenience and ease of use. All control functions of the ET5 operate through microprocessor-controlled relays. For the level control, the relays select combinations from a network of precision, low-noise metal foil resistors to effect loudness and balance changes in 100 steps of approximately .7dB per step.

Conrad-Johnson HD3 USB Digital Audio Converter

The Conrad-Johnson HD3 is an audiophile grade digital to analog converter for use with a computer based audio source. It is designed to exploit the advantages of the recently available high-definition digital source material, to be simple to use, and to establish that digital sources really can “just sound right”. The HD3 is designed to be as hassle-free as possible. Connect it to any available USB port on your computer with a standard USB cable, select the HD3 and you should be ready to play music in a matter of moments.

Conrad-Johnson LP125M Mono Block Amplifiers

Consistent with Conrad-Johnson's design philosophy that circuits should be kept as simple as possible, these amplifiers work their magic with a minimum of vacuum tubes (six in the mono LP125M). A composite triode input stage is direct coupled to a cathode-coupled phase inverter. The output stage is comprised of 6550s operated in ultra-linear configuration (two pair for the LP125M) for an optimal combination of high power and low distortion. Limited negative feedback is applied to the circuit to reduce distortion and provide a sufficiently high damping factor to control most real-world speaker systems. Discrete dc power supply regulators are provided for the input and inverter stages, in order to isolate each stage from the output signal. As with all Conrad-Johnson tube amplifiers, these amplifiers require no complicated adjustments or specialized equipment to maintain. To assure continued peak performance, the owner need only make a simple bias adjustment when new tubes are installed. Built in LED bias indicators allow the user to make this adjustment using only the supplied screwdriver. Component parts quality is a signature strength of any Conrad-Johnson product. The audio circuit and related power supplies feature precision metal film resistors and high-performance polypropylene capacitors. There are no electrolytic capacitors in the audio circuit or in the related power supplies. Proprietary wide-bandwidth output transformers contribute to excellent high frequency performance. Even the input/output connectors and internal wiring have been carefully selected for optimal sonic performance. For those who do require more power, the LP125M mono-block delivers a solid 125 watts. Along with the tonal integrity and faithfulness to the music that are embodied in these amplifiers, their ease of use, low maintenance costs, and reliability will be a revelation for those who have only experienced entry-level tube gear. We invite you to visit your conrad-johnson dealer to audition an LP125M and rekindle your passion for enjoying great music in your home. Power: LP125M - 125 watts from 30 Hz to 15 KHz at no more than 1.0 % THD when driven into 4 ohms (also available connected for 8 or 16 ohm loads) Sensitivity: LP125M - 0.9V to rated power Frequency Response: (at 10 watts): 20 Hz to 20 kHz, +/- .25 dB Hum and Noise: 102 dB below rated power Input Impedance: 100 kOhms Tube Complement: LP125M - 1 x M8080, 1 x 6922, 4 x 6550 Dimensions: 16 D x 19 W x 6.38 H Weight: LP125M - 47 lbs.

Conrad-Johnson LP66S Stereo Amplifier

Consistent with conrad-johnson's design philosophy that circuits should be kept as simple as possible, the LP66S works its magic with just seven vacuum tubes. A composite triode input stage is direct coupled to a cathode-coupled phase inverter - the same improved wide-bandwidth driver stage found in our other, more costly LP amplifiers. The output stage is comprised of a pair of 6550s (each channel) operated in ultralinear configuration for an optimal combination of high power and low distortion. Limited negative feedback is applied to the circuit to reduce distortion and provide a sufficiently high damping factor to control most real-world speaker systems. Discrete dc power supply regulators are provided for the input and inverter stages, in order to isolate each stage from the output signal. As with all conrad-johnson tube amplifiers, the LP66S requires no complicated adjustments or specialized equipment to maintain. To assure continued peak performance, the owner need only make a simple bias adjustment when new tubes are installed. Built in LED bias indicators allow the user to make this adjustment using only the supplied screwdriver. Component parts quality is a signature strength of any conrad-johnson product. Audio circuit and related power supplies feature precision metal film resistors and high-performance polypropylene capacitors. There are no electrolytic capacitors in the audio circuits or in the related power supplies. Proprietary wide-bandwidth output transformers contribute to excellent high frequency performance. Even the input/output connectors and internal wiring have been carefully selected for optimal sonic performance. Conservatively rated at 60 watts per channel, the LP66S offers sufficient power for most applications. Users who have not previously experienced the dynamic range and lifelike timbre of tubed components will find the LP66S an ideal introduction to the joys of modern tubed amplifiers. Along with its tonal integrity, its ease of use, low maintenance costs, and reliability will be a revelation for those who have only experienced entry-level tube gear. For veteran audiophiles, its modest price and size make it a great choice for bringing conrad-johnson quality to a second system. A word of warning if you are in this last group: whether in the den, library, or bedroom, the LP66S’ wide bandwidth and low distortion will give your main system a run for the money. We invite you to visit conrad-johnson dealer to audition an LP66S and perhaps rekindle your passion for enjoying great music in your home. Specifications: Power: 60 watts per channel from 30 Hz to 15 KHz at no more than 1.5 % THD or IMD, both channels driven into 4 ohms Sensitivity: 0.5 V to rated power Frequency Response (at 10 watts): 20 Hz to 20 kHz, +/- .25 dB Hum and Noise: 102 dB below rated power Input Impedance: 100 kOhms Tube Complement: 3 x 6922, 4 x 6550 Dimensions: 16D x 19W x 6.38H inches Weight: 45 Lbs.

Conrad-Johnson TEA2 Phono Stage

The TEA-2 triode equalization amplifier is a vacuum-tube phono stage offering an extraordinary degree of musical accuracy at a moderate price. The audio circuit of the TEA-2 is comprised of two cascaded single-ended triode amplifiers. The circuit is a zero-feedback design, to eliminate the temporal inaccuracies that negative feedback introduces. RIAA equalization is established by a passive network between the two gain stages. This network has been carefully designed and has been implemented with precision (1% tolerance) parts to precisely track the prescribed RIAA equalization curve assuring absolute tonal accuracy. Careful implementation of this fundamentally simple circuit results in extremely wide bandwidth, and low distortion, without resorting to negative feedback. A high-current MOSFET buffer stage follows the second gain stage to achieve a low output impedance (less than 200 Ohms). In the TEA-2, discrete regulated power supplies, carefully designed for minimum impedance, even at the highest audio frequencies, isolate the amplifier stages from the ac line and from each other to guarantee that power supply irregularities do not degrade the audio performance. The TEA-2 is available in high-gain (55 dB) and low gain (40 dB) versions to match a wide range of modern phono cartridges. The high gain version is recommended for use with cartridges with a rated output of 1.0 mV or below. The low gain version is best suited to higher output cartridges. Both versions offer switch selectable resistive loading allowing the user to fine-tune performance to the chosen phono cartridge. The performance of any audio component is only as good as its component parts. The audio circuits and the related regulated power supplies of the TEA-2 use polypropylene and polystyrene capacitors and precision metal film and metal foil resistors exclusively. All parts in the TEA-2's RIAA compensation network are 1% tolerance, to assure precise tracking of the RIAA curve. Input and output connectors and even hook-up wiring have been carefully selected for audio performance. Thoughtful engineering, specification of quality component parts, and painstaking care in production make the TEA-2 a phono equalization preamplifier of remarkable musicality. Specifications Gain: Low Gain - 40 dB High Gain - 55 dB Overload: Low Gain - 175 mV High Gain - 50 mV Hum and Noise: Direct Inputs - 80 dB below 10 mV input Phase: phase correct Ouput Impedance: below 200 ohms Dimensions: 13.625 D x 19 W x 3.625 H Net Weight: 14 lb .

Dream Vision Cinema Ten 80 Video Projectors

Resolution 1920x1080 pixels (Full HD) Projection system 3x 0,82 LCoS chips Image processing External video processor DreamScaler Projection lens 16 full glass elements Integrated optical zoom (motorized) 1.9x (2.0 - 3.8:1) Long throw 1.4x (1.5 - 2.1:1) Short throw Contrast ratio 3500:1 Brightness 800 lumens Colour reproduction > ITU-R BT709 HDTV standard Colour temperature D65 standard - User adjustable Lamp 200 W Lamp life 2000 hours Vertical Offset 0 to 60% Video compatibility HDTV : 480i/p, 576i/p, 720p/50/60, 1080i50/60, 1080p48/50/60 SDTV : NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM Inputs 4 x HDMI (rev 1.1 with HDCP) 2 x Component 3 RCA 1 x RGBHV 5 BNC / Component 2 x Composite Video RCA 2 x S-Video 1x SD-SDI (optional) Home automation Yes (through RS-232C serial port) Screen trigger Yes (3,5mm mini-jack) Power consumption Max 350 W Standby mode

Dream Vision Dream Scaler 3 Video Scaler

The DreamScaler Family is a high quality video-processor range that enhances your Home Cinema experience by featuring advanced picture settings and management. The DreamScaler is also very useful to extend your audio video connectivity and compatibility. The DreamScaler 4 is dedicated to 1080p Full HD processing and up conversion. The most advanced video innovations such as Mosquito Noise Reduction, Colour management, Ambient Light presets are integrated to enjoy at a premium level your Home Cinema experience with any sources. The DreamScaler 4 also integrates the proprietary THEATRE Mode, which is specially optimised for the 2.35 THEATRE System to automate wirelessly the Anamorphic Lens in front of your projector and let you enjoy every movies in their true Cinemascope (R) format without black bars in a true 2.35 projection screen. 1-5 .

Dream Vision Dream Weaver 3 DLP Projector

Highlights : The new DarkChip3 TM DLP of Texas Instruments brings vibrant colours, natural flesh tones, unbelievable details even in dark scenes and an amazing contrast ratio of 3000:1. With its 720p resolution and a generous connectivity (fully compatible with DVI HDCP and HDMI), the DreamWeaver 3 is 100% ready for High Definition TV. The DreamWeaver 3’s state-of-the-art rounded chassis greatly prevents air turbulence, thus reducing its operational noise almost below audibility (

Dream Vision Dream Weaver Plus DLP Projector

Highlights : State of the art Design for easy integration in every room style. True HD resolution (1280x720) from the Mustang HD2+ DLP chip by TI for the best resolution match for HD sources. Carl Zeiss Designed Light Engine. New DCDi from Faroudja with better colors sharpness, a video noise reducer and a high quality built-in Scaler. 8 selectable video inputs. Invisible access to the keypad board and connection board. Resolution 1280x720 16:9 Projection system Texas Instruments Mustang HD2+TM 720p DLP Enhancement New Faroudja DCDi TM FLI2310 Optic Carl Zeiss Projection Lens: F/2.7 (wide), F/3.1 (tele) Throw Ratio 1.67:1 - 2.08:1 (distance/width) Colour Wheel 7 segments (RGBRGBG) Contrast ratio 2300:1 full on / full off Lamp Dual mode : 220W UHP (3000 hours)/250W UHP (2000 hours) Brightness 1200 lumens Colors 16.7 millions simultaneously displayable Installation Front, Rear, Table, Ceiling (Ceiling bracket in option) Keystone Correction Digital up to +/- 20° vertical, +/- 9° horizontal Video compatibility Component and RGB HDTV (720p, 1035i, 1080i, 1080p-24Hz) Component EDTV (480p, 576p progressive scan) SECAM: M, Component, composite and S-Video standard video (480i, 576i, 576i RGB SCART with adapter, NTSC, NTSC M 4.43, PAL: B, G, H, I, M, N) Inputs 2 x components - gold RCA 2 x S-VHS - Mini Din 4-pin 1 x Composite Video - RCA 1 x DVI (M1-DA) - DVI HDCP or HDMI compliant with optional adapter 1 x 15-pin D Sub (HDTV component/RGB, computer) 1 x RS232 control - 9-pin D Sub 1 x D5 (component) 1 x IR Repeater (Niles / Xantech compatible) - 3.5 mm mini-jack 2 x 12 V trigger - 3.5 mm mini-jack Size 0439 mm - Height 127 mm Weight 4.4 Kg Audible noise 25 dB Remote Control Infra-Red remote control Options Ceiling bracket horizontally and vertically adjustable in white or black finish M1DA to DVI adapter M1DA to HDMI adapter Cabinet colour options White or Black 1-5

Dream Vision DreamBee 2 D-ILA Video Projectors

Resolution 1920x1080 pixels (Full HD) Projection system 3x 0,7 LCoS chips Image processing GF9351 video processor featuring VXP technologies Projection lens 16 full glass elements by Fujinon Integrated optical zoom 2x (1.4 - 2.8:1 distance/width) Contrast ratio 30,000:1 Displayable colours Billions of colours Colour temperature Pre-calibrated to D65 (HDTV Standard) User adjustable Lamp 170 W in Normal mode (200 W in High brightness mode) Lamp life 2000 hours in High brightness mode Vertical Offset +/- 80 % Horizontal Offset +/- 34 % Video compatibility HDTV : 480i/p, 576i/p, 720p/50/60, 1080i50/60, 1080p50/60/24 SDTV : NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM Inputs 2 x HDMI (rev 1.3 with HDCP) 1 x Composite Video RCA 1 x Component 3 RCA (also supports Scart via adaptor) 1 x S-Video Home automation Yes (through RS-232C serial port) Power consumption Max 280 W Standby mode

Dream Vision DreamBee 2:35 Theater System

Projector compatibility DreamBee THEATRE, DreamBee 2 Ultimate CinemaTen 80 ST, LT and PRO (Pre-order required) Image processing DreamScaler with THEATRE Mode Video compatibility HDTV : 720p/50/60, 1080i50/60, 1080p50/60/24/25 SDTV : NTSC, PAL, SECAM Anamorphic Lens Full-glass, spherical elements High precision focus (7 turns) Minimum distance to the screen > 4 meters (157 ) Home automation Yes Standard accessories AC power cord Remote control (with batteries) RF-Emitter for 12V trigger (with batteries) Dimensions (WxDxH) 385 x 470 x 150 mm - 15.2 x 18.5 x 5.9 Net Weight 6,4 kg / 14.1 lbs 7,4 kg / 16.3 lbs (with Anamorphic Lens) 1-5

Dream Vision DreamBee D-ILA Video Projectors

Resolution 1920x1080 pixels (Full HD) Projection system 3x 0,7 LCoS chips Image processing GF9351 video processor featuring VXP technologies Projection lens 16 full glass elements by Fujinon Integrated optical zoom 2x (1.4 - 2.8:1 distance/width) Contrast ratio 15,000:1 Brightness Typical 1,000 ANSI lumens Displayable colours 16.7 million colours, 256 shades of gray Colour temperature User adjustable Lamp 170 W in Normal mode (200 W in High brightness mode) Lamp life 2000 hours in High brightness mode Vertical Offset +/- 80 % Horizontal Offset +/- 34 % Video compatibility HDTV : 480i/p, 576i/p, 720p/50/60, 1080i50/60, 1080p50/60/24 SDTV : NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM Inputs 2 x HDMI (rev 1.2 with HDCP) 1 x Composite Video RCA 1 x Component 3 RCA (also supports Scart via adaptor) 1 x S-Video Home automation Yes (through RS-232C serial port) Power consumption Max 280 W Standby mode

Dream Vision Projector Ceiling Brackets

Ceiling brackets for the Dream Vision line of projectors including Dream Bee, Dream Bee Deluxe, Dream Weaver, Cinema Ten Pro, and X3. 1-5 .

Dream Vision Projector Replacement Lamps

Replacement Lamps for the Dream Vision line of projectors including Dream Bee, Dream Bee Deluxe, Dream Weaver, Cinema Ten 80, Dreamy, Cinema Ten Pro, DL500, CineXone, DV-LC5, MovieStar, Lighty, White Magic, and X3. 1-5 .

Dream Vision Projector Replacement Remote Controls

Replacement Lamps for the Dream Vision line of projectors including Dreamy, Dream Weaver, DL500, MovieStar, White Magic, Optimizer, Lighty, CineXone, DV-LC5, and Dream Scaler. 1-5 .

Ethereal EGP8 Green Power Surge Protector

Ethereal green power surge protectors are designed specifically for energy conservation. Each product contains an automatic detecting device which determines whether to turn on or turn off the power according to the electricity usage condition.

Ethereal EGP10 Green Power Surge Protector

Ethereal IL-100 In-Line Surge Protector

High-performance surge protection for home entertainment systems. Voltage spikes can destroy your most expensive Electronics > Audio in seconds! Ethereal Home Theater Surge Protector can ensure the safety of your valuable electronic devices.

Ethereal Power Protection Super Outlet

Ethereal’s Super Outlet uses state-of-the-art high-permeability magnets to clean and purify electrical current before it reaches connected equipment to ensure the highest possible level of performance, from richer audio to more vibrant video.

Ethereal EM HDMI Cable - 1.0 Meter

With the ability to deliver HDMI 1080p, 3D video and 1440p plus ethernet across the entire EM HDMI cable line the EM Series HDMI products are a great value. Great performance and great looks. Try out the EM Series and you will not be disappointed.

Ethereal EM HDMI Cable - 2.0 Meter

Ethereal EM HDMI Cable - 4.0 Meter

Ethereal EM HDMI Cable - 6.0 Meter

Ethereal EP HDMI Cable - 10.0 Meter

Description: HDMI 1.2 and Simplay certified. 24-gauge silver clad oxygen-free copper conductors. CL rated and approved jacket for in-wall installation. Guaranteed to pass 480p, 720p, 1080i and 1080p video. Etheral HDMI cables are manufactured with standard exceeding HDMI 1.2 and Simplay requirements.

Ethereal EP HDMI Cable - 15.0 Meter

Ethereal EXS HDMI Cable - 0.5 Meter

Stepping into the realm of high-end video the Silver Series brings an incredible level of performance to a value price point. Using silver plated PCOCC signal conductors, four separate shields, and nitrogen-injected skin-foam-skin dielectric, as well as maintaining very tight control on the geometry the Silver Series will support 1080p, 16 Bit Video, 3D and 4K x 2K over all of the HDMI line. Includes Ethernet.

Ethereal EXS HDMI Cable - 1.0 Meter

Ethereal EXS HDMI Cable - 2.0 Meter

Ethereal EXS HDMI Cable - 4.0 Meter

Ethereal EXS HDMI Cable - 6.0 Meter

Ethereal HDM-SP HDMI Surge Protector

The Ethereal HDM-SP is the first in line surge protector specifically designed for the HDMI interface. Its overall design methodology was determined by examining all the attributes necessary for a dynamic and robust interface.

Ethereal Platinum HDMI Cable - 0.5 Meter

For our most prestigious product line we went all out. We wanted to be able to guaranty that you will support not only the current 1080P/60, 16 bit HDMI standards, but the upcoming 1440P standard as well. To guarantee maximum performance, solid silver signal conductors are utilized, as well as five separate shields, including a silver plated copper braided shield. Nitrogen injected skin-foam-skin dielectric material is also used to provide stable impedance and low loss.

Ethereal Platinum HDMI Cable - 1.0 Meter

Ethereal Platinum HDMI Cable - 2.0 Meter

Ethereal EXS Digital Audio Cable - 1 Meter

We have designed and built the EM series analog and digital coax cables using our unique 3/4’’ compression ferrule and compression ring insert. Jay Victor carried over these same ideas when he created the EXS Silver Audio, Digital Coax and Speaker cables. For the EXS line he added a patented multi-geometry cable design to provide the most accurate and dynamic digital audio transfer available to the music lover.

Ethereal EXS Digital Audio Cable - 2 Meter

Ethereal EXS Digital Audio Cable - 4 Meter

Ethereal EXS Digital Optical Cable - 1 Meter

Ethereal EXS Digital Optical Cable - 2 Meter

Ethereal EXS Digital Optical Cable - 4 Meter

Ethereal Platinum Digital Audio Cable - 1 Meter

With the creation of our newest line the Platinum series, Jay Victor once again, rose to the occasion and produced our Flagship Analog Audio, Digital Coax, Balanced (XLR) Audio, and Speaker Cables. With Jay’s multi patented designs, these cables are not only esthetically Pleasing But will make Audiophiles Hear what has been missing all along. So sit back, and enjoy the music, it’s all there.

Ethereal Platinum Digital Audio Cable - 2 Meter

Ethereal EXS RCA Audio Cables - 1 Meter Pair

We have designed and built the EM series analog and digital coax cables using our unique 3/4’’ compression ferrule and compression ring insert. Jay Victor carried over these same ideas when he created the EXS Silver Audio, Digital Coax and Speaker cables. For the EXS line he added a patented multi-geometry cable design to provide the most accurate and dynamic analog audio transfer available to the music lover.

Ethereal EXS RCA Audio Cables - 2 Meter Pair

We have designed and built the EM series analog and digital coax cables using our unique 3/4’’ compression ferrule and compression ring insert. Jay Victor carried over these same ideas when he created the EXS Silver Audio, Digital Coax and Speaker cables. For the EXS line he added a patented multi-geometry cable design to provide the most accurate and dynamic analog audio transfer available to the music lover.

Ethereal EXS RCA Audio Cables - 4 Meter Pair

We have designed and built the EM series analog and digital coax cables using our unique 3/4’’ compression ferrule and compression ring insert. Jay Victor carried over these same ideas when he created the EXS Silver Audio, Digital Coax and Speaker cables. For the EXS line he added a patented multi-geometry cable design to provide the most accurate and dynamic analog audio transfer available to the music lover.

Ethereal Platinum RCA Audio Cables - 1 Meter Pair

Ethereal Platinum RCA Audio Cables - 2 Meter Pair

Ethereal Platinum XLR Audio Cables - 1 Meter Pair

Ethereal Platinum XLR Audio Cables - 2 Meter Pair

Ethereal Silver XLR Audio Cables - 0.5 Meter Pair

We have designed and built the EM series analog and digital coax cables using our unique 3/4’’ compression ferrule and compression ring insert. Jay Victor carried over these same ideas when he created the EXS Silver Audio, Digital Coax and Speaker cables. For the EXS line he added a patented multi-geometry cable design to provide the most accurate and dynamic analog audio transfer available to the music lover.

Ethereal Silver XLR Audio Cables - 1 Meter Pair

We have designed and built the EM series analog and digital coax cables using our unique 3/4’’ compression ferrule and compression ring insert. Jay Victor carried over these same ideas when he created the EXS Silver Audio, Digital Coax and Speaker cables. For the EXS line he added a patented multi-geometry cable design to provide the most accurate and dynamic analog audio transfer available to the music lover.

Ethereal Silver XLR Audio Cables - 2 Meter Pair

We have designed and built the EM series analog and digital coax cables using our unique 3/4’’ compression ferrule and compression ring insert. Jay Victor carried over these same ideas when he created the EXS Silver Audio, Digital Coax and Speaker cables. For the EXS line he added a patented multi-geometry cable design to provide the most accurate and dynamic analog audio transfer available to the music lover.

Ethereal EXS Subwoofer Cable - 5 Meter

We have designed and built the EM series analog and digital coax cables using our unique 3/4’’ compression ferrule and compression ring insert. Jay Victor carried over these same ideas when he created the EXS Silver Audio, Digital Coax and Speaker cables. For the EXS line he added a patented multi-geometry cable design to provide the most accurate and dynamic analog audio transfer available to the music lover.

Ethereal EXS Subwoofer Cable - 8 Meter

We have designed and built the EM series analog and digital coax cables using our unique 3/4’’ compression ferrule and compression ring insert. Jay Victor carried over these same ideas when he created the EXS Silver Audio, Digital Coax and Speaker cables. For the EXS line he added a patented multi-geometry cable design to provide the most accurate and dynamic analog audio transfer available to the music lover.

Ethereal EXS Subwoofer Cable - 10 Meter

We have designed and built the EM series analog and digital coax cables using our unique 3/4’’ compression ferrule and compression ring insert. Jay Victor carried over these same ideas when he created the EXS Silver Audio, Digital Coax and Speaker cables. For the EXS line he added a patented multi-geometry cable design to provide the most accurate and dynamic analog audio transfer available to the music lover.

Ethereal Platinum Speaker Cables - 12 Ft Pair

Four different solid PCOCC conductor gauges for best bass and midrange optimization Flat PCOCC conductor for superior midrange reproduction Spiral ribbon PCOCC conductors provide maximum treble definition without harshness Silver content solder joints 24K direct gold plated tellurium copper connectors Low dielectric constant polyethylene dielectric on each conductor

Ethereal EXS Speaker Cable - 2 Meter Single

24k Gold-Plated Terminals for the Best Possible Signal Transfer, 24k Gold-Plated Compression Ring Insert and .75 Strain Relief Ferrule, Low Capacitance Dielectric Inner Circle Jackets and Mylar(R) Foil Shield, Precision-Wound Strands of Braided Oxygen Free Copper, Super Flex Jacket with Braided Cotton Sleeve for Installation Ease

Ethereal EXS Speaker Cable - 3 Meter Single

Ethereal EXS Speaker Cable - 5 Meter Single

Ethereal EXS Speaker Cable - 3 Meter Pair

Ethereal EXS Speaker Cable - 5 Meter Pair

Ethereal EXS Speaker Cable - 10 Meter Pair

Ethereal EM Male to Dual Female RCA Splitter Cable

The Ethereal EM "Y" Splitter Cable features gold plated connectors and allows the audio signal to be split and shared between different audio devices.

Ethereal EM Female to Dual Male RCA Splitter Cable

The Ethereal EM "Y" Splitter Cable features gold plated connectors and allows the audio signal to be split and shared between different audio devices.

Firestone Audio Fireye 1 Headphone Amplifier

The Fireye 1 is a super small headphone amp that’s perfect for boosting volume and vastly improving the sound quality of any portable player or computer. Gives you the needed power boost to drive high end headphones and hear over loud background noise. Its small size makes the Fireye 1 perfect for taking it on the road. The built-in lithium battery provides up to 24 hours of play time on a single charge and is easily recharged from any computer USB port.

Firestone Audio Fireye 2 DAC - Headphone Amplifier

Fireye 2 is a headphone amplifier that also functions as a USB digital audio converter. Fireye 2 is light and handy so it is convenient to put anywhere to use. The shell of Fireye 2 is made of high-quality aluminum.

Firestone Audio Fireye Mini Headphone Amplifier

The new Firestone Audio Fireye Mini is one of the smallest headphone amplifiers in the world, and offers improved sound quality across the board with all iPod, iPad, iPhones and virtually any MP3 player with a 3.5mm headphone output. No matter if you have an iPod Touch or an iPod Nani, the Fireye Mini will provide you with better sound quality, with improved bass response and authority, and the ability to drive a more difficult load than would not otherwise be possible. The Fireye Mini could not be easier to use, simply charge via USB connection to your computer, and then connect to the headphone output of your portable music player, to enjoy great sound on the go.

Firestone Audio Fubar II Mk II DAC

The Fubar II Mk. II is the newest 16Bit/48kHz version of the popular Fubar II digital audio converter. It operates without drivers with any PC or Mac.

Firestone Audio Fubar III Mk II DAC - Headphone Amplifier

The Fubar III MKII USB DAC - Headphone Amp lets you connect your computer to your Amplifier and stream your entire music library with remarkable fidelity. Enjoying High End sound from your computer has never been easier. With the Fubar III MKII you simply plug and play without having to install additional software or drivers.

Firestone Audio Fubar 4 DAC - Headphone Amplifier

The Fubar IV is a superb 24Bit-96kHz DAC with Integrated Headphone amplifier and RCA outputs to connect to your audio rig. You get HiFi music direct from your PC to connect to your home stereo, or you can use the built-in headphone amplifier to drive your headphone. Sound source can be USB or SPDIF, coaxial as well as optical.

Firestone Audio Fubar 4 Plus DAC - Headphone Amplifier

The Fubar IV Plus combines a 24 Bit DAC and Hi-End Headphone Amplifier into one exceptional unit. The 192 kHz up-sampling feature lets you experience the most life-like and natural sound you’ll hear from your digital sources. Inputs include USB and a high end 24 Bit - 96 kHz DAC with both Digital Coax and Toslink Optical inputs. Listen with your headphones from the 1/4″ (6.4mm) jack or send your music directly to your stereo from the RCA outputs.

Firestone Audio Fubar IO Mk II ADC - DAC

Transfer Your Vinyl Records to Your Computer Hard Drive With CD Quality! The Fubar I-O is a High-Quality device that provides exceptional performance for both Digital to Analog and Analog to Digital Convertion. Using USB you simply Plug and Play without installing additional drivers ( compatible with Linux, Mac and Windows operating systems). The Fubar I-O provides a full-duplex system which allows communication in both directions.

Firestone Audio Spitfire Mk II DAC

The Spitfire 24 Bit DAC is one of the most popular audio DACs ever. Its excellent sound quality and great price make it the favorite audio DAC for thousands of audiophiles worldwide. The Spitfire MKII is a perfect upgrade for the CD-DVD player and computer system. Digital inputs are auto selected via Toslink optical-coaxial-USB. (High priority of USB input). The Mk II includes the most commonly requested upgrades, a USB input (to go along with the Optical and Coax inputs) a front mounted power switch and much more. The Spitfire Mk II is a premium, hi-end DAC for the discriminating audiophile. This amazing unit has received loads of praise for its outstanding performance and is compared to DACs costing much more.

Firestone Audio Korora Phono Pre-Amplifier

The Korora can be used with either moving magnet or low-output moving coil cartridges. It utilizes a whole new creative and innovative passive RIAA filter. Switches allow the selection of capacitive load, gain (51, 54, 58, and 69db), and resistive load (10 ohm, 43 ohm, 100ohm, 47Kohm and one free spot).

Firestone Audio Bravo USB to SPDIF Processor

Using function of re-clock is to correct the jitter which is the time variation of a periodic signal in electronics in order to enhance the quality and details of sound. Adopting various kinds of support format (three types of input such as USB-Coaxial-Optical、two types of output such as Coaxial-Optical). Whole product supports 24 bit-96kHz digital signal format (include USB). FSA Suggests adopting Bravo use with Fubar 4 and Fubar 4 plus which can make the users obviously feel the clear positions of musical instruments and the increasing sound-quality.

Firestone Audio Cute Beyond Headphone Amplifier

Cute Beyond is a Pure Class-A Headphone Amplifier with low noise/low distortion features. Adopting both Series and Shunt types can let the users select their ideal type of Volume Control. High electric current output can pretty much drive headphones of any impedance. Using Cute Curve can easily make you enjoy high-quality and awesome sound.

Firestone Audio Cute Curve Headphone Amplifier

Cute curve is a Class-B Headphone Amplifier with push-pull structure, and low noise/low distortion features. Adopting both Series and Shunt types can let the users select their ideal type of Volume Control. High electric current output can pretty much drive headphones of any impedance. Using Cute Curve can easily make you enjoy high-quality and awesome sound.

Firestone Audio Little Country III Headphone Amplifier

Little Country III is a Class-A Tube Pre-Amplifier-Headphone Amplifier. The design of independent power supply module can effectively reduce the interference in sound. By-Pass function can directly transfer the signal to the amplifier in order to keep the original quality of sound. Adopting the mix structure with tube and transfer resistor contribute to Little Country III which not only has large drive-capability to drive most headphones impedance, but also own the characteristics of tube such as vocals sound soft and fat.

Firestone Audio MASS Mini-Preamplifier with Remote

The Firestone MASS is a small pre-amplifier with remote control capable of selecting source inputs, muting function, and controlling volume.

Firestone Audio Big Joe II Mini-Amplifier

The Big Joe 2 is a Class-D integrated amplifier with “push-pull” technology. It can be used for a longer period of time with high power efficiency and low power consumption. The amplifier has 4 gain control settings to adjust perfectly to your application. The BigJoe II also offers a by-pass for it’s own volume control. This turns the BigJoe II into a pure power amplifier, and you can use your own pre-amplifier.

Firestone Audio Big Joe III Mini Digital Amplifier

Big Joe III is a Digital Integrated Amplifier with the technology of Class-D. Big Joe III can be running for a long time with high power efficiency、low power consumption. With Coaxial, Optical, USB, and Analogy Input, users can select from available inputs.

Firestone Audio Big Joe IV Mono-Block Amplifier Pair

Big Joe 4 is a pair of mono power amps from Firestone Audio. If you are looking for power amps of higher output and performance than Firestone’s existing Big Joe II or Big Joe III power amps, you’ve just found them. Big Joe IV supplies 44W per channel into 8 ohm speakers and 80W per channel into 4 ohm speakers – giving plenty of power for full sized systems. As mono power amps, they each have a separate case – still the same tiny size as the other Firestone Audio components – and each has their own separate power supply. Being separate mono amps mean that channel separation is better and stereo imaging is improved and means that you can easily site the amps behind your speakers.

Firestone Audio Supplier Power Supply

Supplier is a high-quality external power supply unit with a low noise linear voltage regulator. Setting high-quality linear voltage regulator inside can effectively reduces the electronic ripples and noises to offer a cleaner and more stable power source. Supplier can be used together with the Source, Pre-Amplifier, and Headphone Amplifier of Cute series from Firestone in order to enhance the machine functions and enrich the sound quality.

Firestone Audio Fire-Rock Audio Rack

Firestone Audio’s new Fire-Rock FR-X001 Rack System is the ideal solution for holding your Firestone Audio products securely in a single solid unit. Solid steel shelves with the Firestone Audio logo emblazoned on the top and columns made from light weight aluminum. Each Firestone Audio FR-X001 will hold two Firestone Audio components, one on top of the other keeping them close together to ensure cabling will not move your components. Have a larger Firestone system? No problem simply add another rack to make a larger racking system to hold up to four units in a single rack.

Firestone Audio Fire-Rock Headphone Stand

At last, a high quality headphone stand that not only looks good, but is also very well made and ergonomically right. Firestone Audio’s new FR-H001 Headphone Stand is the perfect way to display and protect your headphones when not in use. It features a high quality solid steel frame with aluminum cross members and as such it has enough weight to carry even the heaviest of headphones. Like all Firestone Audio products, build quality is second to none. The FR-H001 ships pre-assembled.

Firestone Audio Libby DAC - Headphone Amplifier

The Firestone Audio Libby is an Audiophile Grade 24 Bit – 192 KHz DAC combined with a Class-A Headphone Amplifier. The DAC section features inputs for USB, Digital Coax, Toslink Optical as well as AES/EBU for connecting to professional components. The Libby also includes an analog RCA input that is sampled through a high-precision ADC. A set of RCA analog line outs let you connect the Libby to your pre-amplifier or integrated amplifier.

Firestone Audio Rubby DAC - Integrated Amplifier

The Firestone Audio Rubby is a Digital Power Amplifier with 50 watts per channel and features a built in multi input 24 Bit - 96 KHz DAC (192 KHz up-sampling) and an analog line level input. The DAC section includes inputs for Toslink Optical, Digital Coax, USB, and even an AES-EBU input for connection to professional grade components. A line level input lets you connect to all of your analog components.

Firestone Audio ILTW Asynchronous USB DAC

The Firestone Audio ILTW asynchronous USB DAC lets you enjoy superior audio quality from your entire computer music library. The ILTW delivers Audiophile Quality sound via USB with performance capabilities up to 24 Bit -192 kHz. The bold, black styling makes it an attractive addition to any audio system.

Firestone Audio Black-Key Mini USB DAC

The PC is one of the most common ways to enjoy music these days, but the quality of the built-in audio is simply too noisy and poor in quality. The Firestone Audio BlackKey USB DAC is designed to fix that problem. Designed for the portable both portable and home use, the Firestone Audio BlackKey USB DAC is the smallest option to increase the sound quality from your PC or laptop and is extremely cost effective too. It is made by Firestone Audio, so you can be sure of perfect quality and sound.

Firestone Audio Red-Key Mini USB to SPDIF Processor

The RedKey is Firestone Audio's most compact and affordable 24Bit USB to SPDIF (RCA Coaxial Digital Audio) Converter. The Firestone Audio RedKey plugs into a free USB slot on your PC and outputs clean digital audio via a coaxial SPDIF output to be fed into your DAC or other Coaxial digital accepting devices. The RedKey Works without drivers on any Mac, Windows PC and Linux PC.

Firestone Audio Green-Key Mini USB Isolator

The Firestone Audio GreenKey is a USB Isolator and is designed to solve electrical noise problems, coming through a USB connection of a computer that can influence the audio signal. The most important part of digital audio is the clarity of the data traveling along the USB cable. Since the very beginning of PC based audio, the noise from the power lines has effected the data integrity creating problems with the timing of the digital signal, known as jitter. The GreenKey will help reduce that interference substantially by isolating the power from the connection to the DAC.

Focal Spirit One Headphones

The Spirit One is a lightweight closed back circum-aural headphone designed to be sonically accurate, to keep out most external sounds extensive research was carried out to find the right balance of controlled external leakage to give emotional reassurance and security and of course to be truly comfortable for the extended times they might be worn; a transatlantic flight as an example.

Focal XS-Book Multi-Media Speakers - Pair

Focal XS Book is the ultimate computer 2.0 system, a true mini-monitor equipped with Focal speaker technologies and able to reveal the richness and dynamics of your multimedia audio contents. Compact but high-performance, XS Book can also become an active solution around a flat panel, or bring quality sound into a small room once connected to a music player.

Focal XS-2.1 Multi-Media Speaker System

Connect the Focal XS 2.1 speakers system to your iMac through the USB mode. Switch on XS. Listen to your favorite music from iTunes with the realism of a professional monitoring sound: definition, tonal richness, spacialization and power. And all this with extreme simplicity without any set-up. Choose the adapter corresponding to your iPod and put it on dock. No cable necessary, your iPod is recharging directly on the local supply and you can control it with the remote control. Switch on the synchro mode at the back of the dock, your iPod automatically opens in iTunes and the synchronization starts. Very simple.

Focal Little Bird 2.1 Speaker System

A true, ultra-compact audio system, this system 2.1 connects to classic audio/video sources (Blu-Ray, CD, DVD...) as well as the most recent ones thanks to wireless transmission from iPod, iPhone, iPad or a computer. The Bird system is a bold statement of compact and designer quality Hifi, as it is very easy to install and user-friendly, and can produce totally stunning sound in rooms of 40 square meters and more.

Focal Bird 2.1 Speaker System

Focal Super Bird 2.1 Speaker System

Gefen 1x10 HDMI Distribution Amplifier

The 1x10 HDMI Distribution Amplifier is the perfect solution for anyone who needs to send one source of digital high definition video to multiple HDMI displays at the same time. It supports all HDMI equipment such as DVD players, satellite set top boxes and HDMI displays.

Gefen 1x2 Digital Audio Splitter

Split TOSLINK digital audio from one source to two devices Would you like to send a single compressed 5.1 digital audio signal to two separate digital audio receivers/devices, but you don t know where to get a simple, cost-effective solution? The GefenTV 1:2 Digital Audio Splitter takes one TOSLINK signal and splits it into two digital audio outputs, at a very affordable price. This product is a great solution for customers with single-zone amplifiers who would like to send digital audio to two zones or bi-amp an audio system (Just take 1 audio input to 2 amplifiers and configure the system as you need to.) How It Works Your digital audio source connects to the TOSLINK input jack of the GefenTV 1:2 Digital Audio Splitter. Two TOSLINK cables connect to the splitter's TOSLINK output jacks. The included 5V DC power adapter is connected and powered on. Perfectly reproduced digital audio is now heard on both TOSLINK outputs. Features: Compact unit installs in seconds and hides away easily Eliminates the need for complex or expensive equipment Up to 16 foot cable length possible in and out of the Splitter Use of TOSLINK optical media offers EMI-free signal quality Supports uncompressed 2-channel PCM Supports compressed 2-channel and multichannel audio Specifications: Input port: 1 x TOSLINK optical fiber Output ports: 2 x TOSLINK optical fiber Power Supply/Consumption: 5V DC / 5W maximum Dimensions: 1.7 W x 1.0 H x 1.6 D Operating Temperature: 0-70 deg. C Shipping Weight: 1 lb. Package Includes: (1) Gefen TV 1:2 Digital Audio Splitter (1) 5V DC external power supply (1) User's Manual

Gefen 1x2 HDMI Splitter with Digital Audio

The 1x2 Splitter for HDMI 1.3 with Digital Audio allows set-top boxes, DVD players, DVRs and even computers to be connected to two HDTV displays simultaneously. A TOSLINK output on the rear of the Splitter feeds digital audio to an external amplifier or receiver for additional installation flexibility. A greater number of HDTV displays can be daisy-chained together to create a larger distribution.

Gefen 1x2 VGA Splitter Hub

The 1x2 VGA Hub allows computers with VGA graphic cards to display a picture on two VGA displays or projectors simultaneously, making it perfect for presentations where the operator uses a small monitor at the computer while the audience views the image on a second larger display or projector. How It Works The 1:2 VGA Hub is connected to a PC video source with a VGA (male to female) cable from the computer?s VGA graphics card port to the VGA Hub?s input connector. There are two VGA outputs on the 1:2 VGA Hub. VGA output #1 is the Primary connection, which queries the Primary Display attached to it and determines the possible video resolutions, timings and frequencies that can be used to create a picture. This information is called EDID (Extended Display Identification Data) and it is used to create a picture on all attached displays. VGA output #2 is connected to the second (Secondary) display and creates an image by following the EDID settings obtained from the first (Primary) display; therefore, both displays should be capable of the same resolutions and refresh rates in order to display an identical picture. Features: Connects computers with VGA graphics to two VGA compatible monitors or projectors Allows two VGA display monitors to be connected at the same time to the same video source Simultaneous display at local and remote locations Maintains highest highest video resolution up to 1920 x 1200 Specifications: VGA Amplifier Bandwidth: 350 MHz Input Video Signal: 1.2 Volts p-p Power Supply: 5 VDC (External) Power Consumption: 5 Watts (max.) Shipping Weight: 2 lbs. Dimensions: 2.6 W x 1 H x 2.6 D Package Includes: 1:2 VGA Hub 6ft. VGA cable (M-F) 5v power supply

Gefen 1x3 Component Video with Audio Distribution Amplifier

One Component and Audio Input, 3 Component and Audio Outputs The 1:3 Component Audio Distribution Amplifier is the perfect solution for anyone who needs to send one source of high definition component video and analog or digital audio to multiple displays at the same time. It supports all component equipment, such as DVD players and satellite set top boxes and all component displays. In operation, the component video source is connected to the distribution amplifier at the input. Three outputs are available to be used in part or in full. Once the unit is connected and powered, your source is routed to up to three component high definition displays at the same time. Features: Connects up to three component displays at the same time to one video source Support SD(composite, YCbCr) and HDTV (YPbPr, RGsB) input signal Maintains 480p, 720p, 1080i, and 1080p resolutions Maintains high resolution video - beautiful HDTV resolutions up to 1080p are easily achieved video source at the same time Specifications: Input: YPbPr x1 or RGsB x1 (or RGBHV), or composite x3 1 Vp-p@ 75 ohm Output: YPbPr x3, or RGsB (or RGBHV) x3, or composite 3x3 Audio input: coaxial (S/PDIF) x1 + R/L x1 Audio output: coaxial (S/PDIF) x3 + R/L x3 Analog audio input/output: audio 2 Vrms max 47k ohm Bandwidth: 480MHz (-3dB) Video Range: 1080p Power Supply: 5V DC; Power Consumption 5W Dimensions: 5.5 W x 1.5 H x 3.6 D Shipping Weight: 3 lbs. Package Includes: 1:3 Component DA One 6 foot Component cable 5V DC Power Supply

Gefen 1x3 HDMI Splitter

The Gefen Splitter for HDMI 1.3 allows AV sources such as Blu-Ray players and set-top boxes to be displayed on up to 3 High Definition Displays simultaneously. Two or more splitters may be connected together to create a larger distribution. This product supports HDMI 1.3 Deep Color and 1080p Full HD with 8 channels of multichannel digital audio for superior quality HDMI 1.3 signal distribution.

Gefen 1x4 HDMI Splitter

The Gefen 1x4 Splitter for HDMI 1.3 allows set-top boxes, DVD players, and other HDTV devices to be connected to four or more HDTV displays. When two or more Splitters are connected together, they can be used to create a larger video signal distribution. This new unit supports HDMI 1.3 features and passes the higher bandwidth HDMI 1.3 signal for the ultimate in state-of-the-art HDMI signal duplication.

Gefen 1x4 VGA Splitter Hub

The 1x4 VGA Hub allows a computer with a VGA graphic card to connect to up to four VGA compatible monitors or projectors at the same time. Because it allows one computer to drive multiple monitors for simultaneous viewing, you can use it to set up additional monitors in the workspace, or to assist presentation environments by sending graphics to both monitors and projectors at the same time.

Gefen 1x5 HDMI Splitter

The Gefen 1x5 Splitter for HDMI 1.3 allows set-top boxes, DVD players, Blu-ray players and other HDTV devices with HDMI outputs to be connected to up to five HDTV displays (or more if multiple splitters are utilized in place of HDTV displays).

Gefen 1x8 DVI Splitter

The 1x8 DVI Distribution Amplifier is the perfect solution for anyone who needs to send one source of digital high definition video to multiple displays at the same time. It supports all DVI equipment, such as computers, HD-DVD players and satellite set top boxes and all DVI displays.

Gefen 1x8 VGA Over Cat5e Distribution Amplifier Sender

One VGA Input, Eight VGA Outputs - The 1x8 VGA CAT5 Distribution Amplifier is the perfect solution for anyone who needs to send one source to multiple displays in remote locations at the same time. The 1:8 VGA CAT5 Distribution Amplifier has eight RJ-45 output connector and one VGA input. The 1:8 VGA CAT5 Distribution Amplifier's RJ-45 connectors are connected to up to eight VGA CAT5 Distribution Amplifier receivers using industry standard CAT5 cables. The receivers can be placed up to 330 feet away from the transmitter.

Gefen VGA Cat5e Distribution Receiver

The VGA CAT5 Distribution R connects via CAT5 cable to the 1x8 VGA CAT5 Distribution Sender (Required). The receiver can be connected up to 330 feet away from the Sender unit. One CAT-5 cable connects the sender and the receiver to each other, extending your video flawlessly.

Gefen 2x1 DVI-KVM-DL Switcher

The 2x1 DVIKVM DL Switcher allows effortless switching between two cross-platform dual link DVI computers using just one dual link DVI display and USB 2.0 keyboard and mouse. Audio, video and control signals are switched for each computer upon selection, providing an easy and effective method of accessing two computers from one workstation without the hassle of networking.

Gefen 2x2 HDMI Switcher

Gefen's 2x2 Switcher for HDMI 1.3 is equipped with two HDMI inputs and two HDMI outputs. Two inputs accommodate the simultaneous connection of up to two high definition video sources, such as satellite systems and Blu-Ray players. Two outputs send the high definition audio/video signals to up to two HDTV displays. Switching is done via the included IR remote.

Gefen 2x4 HDMI Switcher

Gefen's 2x4 Switcher for HDMI 1.3 is equipped with two HDMI inputs and four HDMI outputs. Two inputs accommodate the simultaneous connection of up to two high definition video sources, such as satellite systems and Blu-Ray players. Four outputs send the high definition audio/video signals to up to four HDTV displays. Switching is done via the included IR remote.

Gefen 4x1 HDMI Switcher

Share a Single HDTV Display with up to 4 HDMI 1.3 Video Sources 4 Sources + 1 Display = Greater Integration Options Gefen's 4x1 HDMI(TM) Switcher routes high definition video in multiple resolutions up to 1080p plus multichannel digital audio from any of four sources. four inputs accommodate the simultaneous connection of up to four high definition video sources, such as satellite systems and Blu-Ray players. The output sends the high definition audio/video signals to a high definition display. Switching is done via the IR remote that is provided with the unit. The current video source selection is always remembered. When a new source is connected and powered on, the Switcher temporarily routes that signal to the display. Should the new device lose power, the previous selection is restored. This feature is useful for temporarily verifying the functionality of new equipment. How It Works You simply connect all your sources to the Switcher's inputs. Then connect the display on the output port. Once the sources, the Switcher and the display(s) are powered and connected, you simply select which source you want to view using the IR remote. Note: This device is fully HDCP compliant. HDMI 1.3 Features: Features: Connects and Switches up to four HDMI video sources at the same time to one video source Included IR Remote control allows switching from a comfortable distance away Maintains high resolution video -- beautiful, sharp HDTV resolutions up to 1080p, 2k, and computer resolutions up to 1920 x 1200 are easily achieved HDCP Compliant Specifications: Video Amplifier Bandwidth: 340 MHz Input Video Signal: 1.2 Volts p-p Input DDC Signal: 5 Volts p-p (TTL) Single Link Range: HDTV 1080p / 1920x1200 @ 60 Hz HDMI Connectors: Type A, 19-Pin Female Power Supply: 5V DC Power Consumption: 10 Watts (max) Dimensions: 6.9 W x 2.1 H x 6.9 D Shipping weight: 5 lbs.

Gefen 4x2 HDMI Switcher

Gefen's 4x2 Switcher for HDMI 1.3 has four HDMI inputs and two HDMI outputs. Up to four HD audio/video sources are connected at one time to the HDMI inputs such as satellite systems and Blu-Ray players. Two mirrored HDMI outputs send HD audio/video signals to two HDTV displays simultaneously. A convenient S/PDIF digital audio out allows connection to an external audio video reciever if desired. Switching is done via the included IR remote.

Gefen 4x4 Component Video with Audio Cat5 Matrix Switcher

Matrix any 4 Component sources to 4 remote displays over CAT5 The Gefen 4x4 Component/Audio CAT5 Matrix offers unprecedented flexibility and convenience by routing high definition video and analog/digital audio from any of four Component video sources to any of 4 remote displays over standard CAT5 cabling. Each remote display has a control box that allows the viewer to select any of the 4 video sources and control that source via an IR remote control as if the viewer was standing in the room where the source originates. Full High-Resolution HDTV signals are supported up to a resolution of 1080p at a maximum distance of 1000 feet. The Gefen 4x4 Component/Audio CAT5 Matrix works with any Component video source including DVD players, cable boxes, and satellite set-top boxes that connect to a Component display. Every source is accessible at all times by any display by selecting it with the IR remote. How It Works You simply connect up to 4 local Component video and analog/digital audio sources to the CAT5-Matrix's inputs. Connect the included 1-foot loopback cables into the upper board for the CAT5 extension function. Then run each of your CAT5 cables from the Matrix to the remote displays. At each remote display, terminate the CAT5 cable run with a Component/Audio CAT5 Receiver device. Connect each Receiver to a display and your analog/digital audio equipment and you re all set. Note: The Gefen 4x4 Component/Audio CAT5 Matrix can receive both analog L+R stereo or S/PDIF digital audio, and output all audio formats at the reciever/display end: TOSlink, S/PDIF, and analog L + R stereo audio. Features: Switches easily between any four component/audio sources Sends up to four video inputs to any four remote displays Maintains 1920 x 1200, 1080p, and 2k resolution video Extends video up to 1000 feet over CAT-5 cable Discrete IR remote (included) Serial RS-232 remote port Rack ears included Specifications: Video Amplifier Bandwidth: 350 MHz Input Video Signal: 1.2 volts p-p Video Resolutions: 1080p Video Connector: RCA-style RGB x 3 Analog Audio Connector: RCA-style L + R (Stereo) Digital Audio Connector: S/PDIF Coax. (Matrix), S/PDIF and TOSlink (Receiver) Link Connector: RJ-45 Shielded Remote Control Port: RS232 female, mini-stereo Dimensions Sender: 17 W x 3.5 H x 5.875 D Dimensions Receivers (ea): 6.6 W x 1.3 H x 2.7 D Power Supply for Sender: one 24V DC (60 Watts) Power Supply for Receivers: four 5V DC (10 Watts each max.) Shipping Weight: 14 lbs. Package Includes: 1 x 4x4 Component/Audio CAT5 Matrix 4 x Component/Audio over CAT-5 Receiver Units 4 x RMT-4 Infrared Remote Controls 4 x 1-foot 5 RCA Component Video/Audio cables (for selecting CAT5 transmission) 4 x 6-foot 5 RCA Component Video/Audio cables (for connecting Matrix to sources) 4 x 5V DC Power Supplies (for Receivers) 1 x 24V DC Power Supply (for Matrix Sender) Rack Ears User's Manual

Gefen 4x4 Component Video with Audio Matrix Switcher

Route any 4 Component AV Sources to any 4 Displays -- with S/PDIF support The Gefen 4x4 Component w/Audio Matrix offers unprecedented flexibility and convenience by routing high definition video and analog/digital audio from any of four sources to any of 4 local displays and audio reproduction equipment. Full High-Resolution HDTV signals are supported up to a resolution of 1080p. The Gefen 4x4 Component w/Audio Matrix works with any Component Video source including DVD players, cable boxes, and satellite set-top boxes that connect to a Component display. Every source is accessible at all times by any display by selecting it with the IR remote. How It Works Connect up to 4 local Component AV sources to the Matrix's inputs. Connect the outputs to up to 4 Component displays and audio receivers, plug in the power supply, and crisp, vibrant video with audio will appear at the chosen locations. Features: Switches easily between any four component/audio sources Sends up to four video inputs to any four remote displays Maintains 1920 x 1200, 1080p, and 2k resolution video Discrete IR remote (included) Serial RS-232 remote port (for unattended control) Rack ears included Specifications: Video Amplifier Bandwidth: 350 MHz Input Video Signal: 1.2 volts p-p Video Resolution: 1080p Video Connector: RCA-style RGB x 3 Analog Audio Connector: RCA-style L + R (Stereo) Digital Audio Connector: S/PDIF Coax. in/out Remote Control Port: RS232 female Power Supply Sender: 24V DC (60 Watts) Dimensions: 17.1 W x 1.8 H x 4.4 D Shipping Weight: 9 lbs. Package Includes: 1 x 4x4 Component w/Audio Matrix 4 x 6-foot 5 RCA Component Audio/Video cables 1 x 24V DC Power Supply Rack Ears User's Manual

Gefen 4x4 DVI Dual-Link Matrix Switcher

Easily combine any four cross-platform Dual Link DVI video display outputs and four Dual Link DVI digital displays without networking. Our 4x4 DVI Dual Link Matrix provides a simple, reliable and highly effective method of creating multiple Dual Link DVI display consoles, with each console capable of accessing any one of the Dual Link DVI video sources at any time by remote control. You also have the option of setting up the four displays locally or extending them with a Gefen extender.

Gefen 4x4 HDMI Matrix Switcher

The 4x4 Matrix for HDMI 1.3 routes high definition at resolutions up to 1080p with multichannel digital audio from any four HDMI sources to any four displays. The 4x4 Matrix eliminates the need to disconnect and reconnect HDMI sources. It works with any HDMI source that connects to an HDMI display, supporting advanced digital audio formats such as Dolby TrueHD and DTS HD Master Audio. Each source is accessible at all times by any display by selecting it with an IR remote, or using the RS232 port to switch the unit.

Gefen 4x4 VGA Matrix Switcher

The Gefen 4x4 VGA Matrix offers flexibility and convenience by routing high-quality VGA and analog audio from any of four VGA/audio sources to any of 4 VGA displays and audio devices. The Gefen 4x4 VGA Matrix works with a wide variety of VGA sources such as computers, security cameras and DVRs. Every source is accessible at any time by any display by selecting it with the included IR remote, front panel buttons, or RS-232 control

Gefen 8x1 HDMI Switcher

The Gefen 8x1 Switcher for HDMI 1.3 routes eight different HD sources at resolutions of up to 1080p full HD to a single HDTV display. This unit supports HDMI 1.3 which adds features such as enhanced color and audio capabilities that enrich the Hi-Def experience.

Gefen 8x8 Crosspoint HDMI Matrix Switcher

Crosspoint any Hi Def source to any or all eight HDTV displays as a one-to-one and one-to-many combination The Gefen 8x8 Crosspoint Matrix for HDMI 1.3 routes high definition video at resolutions of up to 1080p with multichannel digital audio from any eight HDMI sources to any eight displays. The 8x8 Crosspoint Matrix eliminates the need to disconnect and reconnect HDMI sources, connecting to any HDMI-compliant display. The 8x8 Crosspoint Matrix supports advanced digital audio formats such as Dolby True HD and DTS HD Master audio. Each source is accessible at all times by any display by selecting it with the included IR remote, or by using the RS232 port. How It Works Connect any eight HD sources to the Matrix's HDMI inputs. Then connect eight displays to the Matrix's HDMI outputs. Once the sources, the Matrix and the displays are powered up and connected, select which HD sources you want to view on any of the displays by using the included IR remote or via RS232 connectivity. Note: HDMI 1.3 Matrix Features Supported: Dolby TrueHD and DTS-HD Master Audio Deep Color (XV Color) 225 MHz (up to 12 bit YUV 444 @ 1080p Lip-Sync Pass Through Color Space Conversion CEC Pass Through Fully HDCP Compliant The 8x8 Crosspoint Matrix for HDMI 1.3 uses crosspoint-based switching that allows HDCP from any input to any output. Features: Distributes any of the eight inputs to any or any combination of the eight HDMI(TM) output displays Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080p, 2k, and computer resolutions up to 1920 x 1200 are easily achieved Serial RS232 port for remote control Discrete IR remote control (included) Set of Rack Ears included HDMI and HDCP compliant Specifications: Video Amplifier Bandwidth: 225 MHz per channel Single Link Range: 1080p - 1920x1200 Input Video Signal: 1.2 Volts p-p Input DDC Signal: 5 Volts p-p (TTL) Remote Control Ports: One RS232 female, mini-stereo Rack mountable: 5U rack space, rack ears included HDMI Input connectors (8): Type A, 19-pin male HDMI Output connectors (8): Type A, 19-pin male Power Supply: 24V DC Power Consumption (max): 60W max Dimensions: 19.0 W x 7.0 H x 13.375 D Shipping Weight: 24.7 lbs

Gefen Analog Audio to Digital Audio Converter

Takes analog audio and converts it to digital via TOSLink or SPDIF The new GefenTV Analog to Digital Audio Adapter converts analog Left/Right RCA-style audio connections to digital S/PDIF or TOSLink outputs. The unit is compact, easy to install, and operates in a wide variety of operating conditions. How It Works Simply plug in your analog audio source into the RCA jacks, then connect your digital receiving device to your choice of either coaxial or optical digital output. Power-cycle all connected equipment, and you will be enjoying digitally converted audio from your analog source at the receiving device. Features: * Converts analog L/R signals to digital S/PDIF or TOSLink * Compact and easy to Install * Simple to Operate Specifications: * Coaxial and optical output ports * Right and Left RCA Stereo input ports * 5V DC / 0.36A power supply * Dimensions: 1.65 W x 0.87 H x 1.59 D * Supports 48 kHz output sampling frequency * Supports optical cable run of up to 5 meters (15 feet) * Silver plastic chassis * Operating temperature: 0-48 deg. C * Weight: 30g (unit only) Package Includes: * (1) GefenTV Analog-to-Digital Audio Converter * (1) 5V DC external power adapter

Gefen Auto Volume Stabilizer with Digital Audio Decoder

Enjoy listening to the same volume levels when watching any TV program or during commercials, no matter what is on. The GefenTV Auto Volume Stabilizer with Digital Audio Decoder product serves two functions: it is a high-quality volume stabilizer and also delivers a mixdown from a 5.1 channel to two-channel, Left Right audio using Dolby AC3 decoding. It actually makes the volume adjustments in such a subtle way that you won't even notice the change.

Gefen Component Video and Analog Audio to HDMI Converter

Convert Component Video and Analog Audio to HDMI The Component Audio to HDMI Adapter is a unique device that allows older analog devices to be integrated seamlessly into the modern home theater. This adapter connects component video home theater devices to HDMI compliant digital monitors. This adapter also takes analog L+R audio and encodes it onto the HDMI signal for the full HDMI video and audio effect. With the Component Audio to HDMI Adapter legacy home theater devices and computer systems can be easily connected any HDMI display for the full digital video and audio experience. How It Works Simply connect the supplied Component cable to the input side of the Component Audio to HDMI Adapter. Then connect the RCA audio cables to the audio inputs of the Component Audio to HDMI Adapter. Then connect the HDMI display or projector to the HDMI output of the Component Audio to HDMI Adapter. The adapter generates the compatible analog to digital conversion signals for video and audio as well encoding the audio onto the HDMI to make the connection between the analog inputs and the digital output work. Features: Supports resolutions up to 1080p/60 and1920x1200 Allows you to connect YPbPr sources to HDMI equipment Encodes analog audio with the video signal into HDMI Plug-and-play installation HDMI 1.2 compliant Specifications: Maximum Pixel Clock: 165 MHz (HDMI) Maximum Video Bandwidth: 350 MHz (YPbPr) Input Video Signal: 1.2 Volts p-p HDMI Output Connector: (1) Type A 19 pin female Component Connector: (1) YPbPr - 3 RCA Audio Input Connectors: (1) L+R Analog RCA Power Supply: 5V DC Power Consumption: 5 Watts (max) Dimensions: 3.7 D x 4 W x 1.2 H Shipping Weight: 2 lbs Package Includes: Component Audio to HDMI Adapter One 5V Power Supply One 6 ft RCA L+R Audio Cable One 6 ft 3 RCA Cable Users Manual

Gefen Component Video and Digital Audio to HDMI Converter

Convert Component Video and Digital Audio to HDMI The Component with Digital Audio to HDMI Adapter is a unique device that allows older analog devices to be integrated seamlessly into the modern home theater. This adapter connects component video home theater devices to HDMI compliant digital monitors. This adapter also takes digital audio and encodes it onto the HDMI signal for the full HDMI video and audio effect. With the Component + Digital Audio to HDMI Adapter legacy home theater devices can be easily connected any HDMI display for the full digital video and audio experience. How It Works Simply connect the supplied Component cable to the input side of the Component + Digital Audio to HDMI Adapter. Then connect the Toslink digital audio cables to the audio input of the Component + Digital Audio to HDMI Adapter. Then connect the HDMI display or projector to the HDMI output of the Component Audio to HDMI Adapter. The adapter generates the compatible analog to digital conversion signals for video as well encoding the audio onto the HDMI to make the connection between the analog inputs and the digital output work. Features: Allows you to connect YPbPr HDTV sources to an HDMI display Encodes digital audio onto the video signal for HDMI video and audio Supports HDTV/YPbPr Supports HDTV resolution up to 1080p HDMI compliant Specifications: Digital Video Amplifier Bandwidth: 165 MHz Video Amplifier Bandwidth: 350 Mhz Input Video Signal: 1.2 volts p-p Input DDC Signal: 5 volts p-p (TTL) HDMI Connector: type A (19 pin) female Video Connector: 3 RCA Component Audio Connector: digital Toslink Power Consumption: 5 watts (max) Power Supply: 5V DC Dimensions: 4 W x 1 H x 4 D Shipping Weight: 2 lbs. Package Includes: Component + Digital Audio to HDMI Adapter One 5V DC Power Supply One 6 ft Toslink Digital Audio Cable Users Manual

Gefen Component Video Cat5e Extender

Extends any Component Video HDTV display up to 330 feet (100 meters) using a Single CAT-5e Cable The Component Extender allows users to extend Component video signals beyond the A/V rack. The Component Extender Series can be used to extend a Component signal to cover the distances up to 330 feet. Industry standard Category 5e (CAT-5e) cable is used for the extension. How It Works The Component Extender sender unit connects to any component video source using the supplied Component cable. The receiver unit connects to your HDTV component video display up to 330 feet (100 meters) away. One CAT-5e cable is used to connect the sender to receiver for perfect video extension up to 1080p. Features: Supports up to 1080p component video. Power only required only on transmitter. Plug and Play installation. Equalizations for different CAT-5e skews. One CAT-5e Cable for extension. No Loss of Quality. Specifications: Video Amplifier Bandwidth: 120MHz Input Video Signal: 1.2 Volts p-p Input Sync Signal: 5 Volts p-p (TTL) Horizontal Frequency Range: 15-70 KHz Vertical Frequency Range: 30-170 Hz Video In: YPbPr Video Out: YPbPr Link Connector: RJ-45 Power Supply: 5 VDC (External) Power Consumption: 5 Watts (Max.) Dimensions: 2 W x 1.25 H x 3.75 D Package Includes: Component Extender S Component Extender R 3 RCA 6ft. Cable 5v DC Power Supply

Gefen Component Video with Audio Cat5e Extender

Extends component video and audio up to 1000 feet (300 meters) using one CAT-5e cable Extend your audio and video signal using the Gefen Component Audio Extender. Place your source anywhere and extend the signal up to a 1000 feet away. The Component Audio Extender will extend Analog Component video as well as Analog Audio or Digital Audio via SPDIF or TOSlink. All audio is transmitted digitally over the CAT-5e cable and both the analog and digital audio outputs are active on the receiver side. How It Works The Component Audio Extender sender unit connects to any Component video and audio source using the supplied Component and 2 RCA audio cables. The receiver unit connects to your HDTV component video display and audio input up to 1000 feet away. One CAT-5e cable is used to connect the sender to receiver for perfect video extension up to 1080p. The sender and receiver both will be powered individually by 5V power supplies. Note: Both analog and digital audio outputs are active on the receiver side when two channel audio is inputted. If multi-channel audio is inputted then the analog audio output will not work. Features: Supports up to 1080p component video Supports analog L+R audio and multichannel digital TOSlink or SPDIF audio No Loss of Quality Plug and play installation Equalizations for different CAT-5 skews One CAT-5 cable for extension Specifications: Video Amplifier Bandwidth: 350 MHz Input Video Signal: 1.2 Volts p-p Input Sync Signal: 5 Volts p-p (TTL) Horizontal Frequency Range: 15-70 KHz Vertical Frequency Range: 30-170 Hz Video In/Out: 3 RCA component Audio In/Out: 2 RCA Audio, 1 SPDIF, 1 TOSlink Link Connector: RJ-45 Shielded Power Supply: 5V DC Power Consumption: 10 Watts (max.) Dimensions: 5.2 W x 1.2 H x 2.7 D Package Includes: (1) Component Audio Extender Sender (1) Component Audio Extender Receiver (1) 6ft. Component Cable (1) 2 RCA L+R Audio Cable (2) 5V Power Supply

Gefen Composite to HDMI Scaler

Transform Composite or S-Video into crisp, scaled HDMI video The new GefenTV Composite to HDMI Scaler takes either Composite Video or S-Video as input and converts it to digital HDMI video, then scales it up to a maximum output of 1080p resolution (or 1920x1200 when used with a computer monitor). How It Works Simply plug in your Composite or S-Video video source to its input jack on the rear of the Scaler. The Scaler will automatically detect the video frequency and resolution of the source signal, then convert that picture to a digital HDMI video signal. You will then choose the best output resolution and viewing format of the picture on your HDTV via the on-screen menu system (using the included IR remote) or using the buttons on the front of the Scaler. Note: This device is not HDCP Compliant. Features: Inputs S-Video or Composite Video at 480i or 576i resolutions Outputs HDMI video at resolutions of up to 1080p Input resolution is automatically detected while the output resolution and refresh rate can be selected via the on-screen display (OSD) menu system and front panel push-buttons 48MB frame buffer for frame rate conversion Scales Composite Video and S-Video to HDMI with embedded audio Supports video output resolutions for computer equipment at up to 1920x1200 Specifications: Digital Video Amplifier Bandwidth: 165 MHz VGA Amplifier Bandwidth: 10 MHz Input DDC Signal: 5 Volts p-p (TTL) S-Video Connector: Mini-DIN Composite Connector: RCA Jack Power Consumption: 10 Watts (max) Power Supply: 5V DC Dimensions: 7 W x 1 H x 4 D Shipping Weight: 2 lbs. Package Includes: 1 - Composite To HDMI Scaler 1 - 6 ft 3 RCA Composite Cable (M-M) 1 - 5V DC Power Supply 1 - User's Manual

Gefen Composite Video with Audio Cat5e Extender

Extends composite video and audio up to 1000 feet (300 meters) over one CAT-5 cable. How It Works The Composite Video Extender sender unit connects to any component video source using the supplied Composite cable. The receiver unit connects to your composite video display up to 1,000 feet away. One CAT-5e cable is used to connect the sender to receiver for perfect video extension. The Composite Video Extender can extend either 3 composite video signals or 1 composite video signal plus 2 audio. Features: Supports up to 480i composite video Supports analog L+R audio Power only required only on transmitter Plug and play installation Equalizations for different CAT-5 skews One CAT-5e cable for extension Specifications: Video Amplifier Bandwidth: 350 MHz Input Video Signal: 1.2 volts p-p Input Sync Signal: 5 volts p-p (TTL) Horizontal Frequency Range: 15-70 KHz Vertical Frequency Range: 30-170 Hz Video In/Out: 1 RCA composite Audio In/Out: 2 RCA Audio Link Connector: RJ-45 Shielded Power Supply: 5V DC Power Consumption: 5 watts (max.) Dimensions: 3.5 W x 1.2 H x 2 D Package Includes: Comp/Audio Extender S Comp/Audio R 1x 5v DC Power Supply 1x 3 RCA Cable

Gefen Digital Audio Switcher

Switch any two TOSLINK digital audio sources or add a second one to your audio system -- without expensive add-on equipment! The GefenTV Digital Audio Switcher allows you to easily and economically switch any two TOSLINK digital audio sources. This unobtrusive, simple external device is perfect for expanding your available TOSLINK audio inputs without spending a lot of money adding extra equipment. How It Works Simply plug your TOSLINK digital audio sources into the TOSLINK input connectors on the GefenTV Digital Audio Switcher, then connect the single TOSLINK output cable to your audio receiving device. Connect the included 5V DC power adapter to the switcher and into a wall socket. Perfectly reproduced digital audio is now heard. An A-B switch on the GefenTV Digital Audio Switcher selects the active TOSLINK digital audio source. Note: Input and output cables may be up to 25 feet (5m) long each. Features: Compact unit installs in seconds and hides away easily Eliminates the need for complex or expensive equipment for adding an additional TOSLINK input to your AV system Generous 25ft/5m distance between source and unit / unit and receiver Supports uncompressed 2-channel PCM audio Supports compressed 2-channel and multichannel audio EMI-free audio signal Specifications: Input ports: 2 x optical digital TOSLINK Output port: 1 x optical digital TOSLINK Power Supply/Consumption: 5V DC / 5W maximum Operating Temperature: 0-70 deg. C Dimensions: 1.7 W x 1.0 H x 1.6 D Shipping Weight: 1 lb. Package Includes: (1) GefenTV 2x1 Digital Audio (TOSLINK) Switcher (1) 5V DC external power adapter (1) User's Manual

Gefen Digital Audio to Analog Adapter

Digital Audio Transformed to Analog Audio -- Effortlessly and Simply The Digital To Analog Audio converter box takes your coaxial/optical (S/PDIF or TOSLink) digital audio source and converts it to standard analog left/right audio, available for connection to an external device such as an amplifier or recording deck via standard RCA-style jacks. Now you can bridge your legacy sound system with digital sources such as DVD and CD players that don t have RCA-style analog outputs. How It Works Simply run a short extension cable from an available digital audio output jack on your digital source device to the same type of digital input on the Converter. Select which kind of digital signal (coaxial or optical) is being input with the selector switch on the converter, then hook up your analog RCA-style left and right cables to the Converter's analog RCA jack outputs and power up all equipment. That's all there is to it! Note: This product does not support encoded Dolby Digital audio. Verify you can turn off Dolby Digital in the source you will be connecting to this converter. Features: Converts S/PDIF or TOSLink digital audio signals to analog L/R audio Digital interpolation filter and digital to analog converter (DAC) Accepts uncompressed digital audio as input Samples at 32, 44.1, 48 and 96 KHz 2-channel LPCM (Linear Pulse Code Modulation) 24-bit S/PDIF incoming bitstream on left and right channels Compact and easy to install Specifications: Coaxial and Optical digital input ports Right and Left RCA Stereo analog output ports 5v DC power supply (US/EU standards, CE/FCC/UL certified) 1.65 W x 0.87 H x 1.59 D Weight: 25g (unit only) White plastic chassis Operating Temperature: 0-70 deg. C .

Gefen Digital to Analog Audio Decoder

Features: Converts S/PDIF or TOSLINK digital audio to L/R analog audio Digital interpolation filter and digital to analog converter (DAC) Supports up to 6 channels (up to 5.1 Surround) of audio encoded in Dolby Digital Auto samples at frequencies of 32, 44.1, 48 KHz 24-bit incoming bitstream on left and right channels Allows listening to digital audio sources on legacy analog sound systems Compact and easy to install Specifications: Inputs: Coaxial and Optical digital audio ports Outputs: Right and Left RCA-type Stereo analog output ports Output Impedance: 500 Ohms Output Voltage: 1.8V RMS @ Max Input (0dBFS) Frequency Response: 90dB (20Hz - 20kHz A Weighting) Power Supply/Power Consumption: 5V DC / 5W max. Operating Temperature: 0°C - 70°C Dimensions: 1.7 W x 0.9 H x 1.6 D Shipping Weight: 1 lb. Package Includes: (1) GefenTV Digital Audio Decoder (1) 5V DC Power Supply (1) User's Manual

Gefen Dual-Link 1x2 DVI Splitter

The DVI DL Splitter allows computers with a Dual Link DVI output to be connected to two or more Dual Link DVI displays at the same time. It is a flexible distribution hub that can accommodate multiple displays when two or more DVI DL Splitters are connected together to create a greater distribution.

Gefen DVI Detective Plus

Save the EDID -- for HDTV equipment as well as Computers. Computers and HDTV video source devices can sometimes lose the EDID -- basically the electronic identification of a display which lists its possible resolutions and frequencies. When displays are switched away or disconnected and then reconnected, the EDID can be lost and the computer or HD video source device can lose the ability to display the image properly. The Gefen DVI Detective Plus allows you to switch or relocate HDTV or Computer video displays while tricking the source devices into continuously reading the display information -- maintaining smooth video operations throughout the process. How It Works Prior to first use, the DVI Detective is connected to the Display where it stores the Display's EDID while under power. The power is then removed from the DVI Detective which is placed to the output of your video source. The stored EDID is permanently saved. Note: The DVI Detective Plus includes 4 built-in manually-selectable generic EDIDs (display identities) for several standard home theater setups with multi-channel audio and standard HDTV resolutions. This functionality is vital when equipment reaches a state of indeterminite function and will not respond to signals or controls properly, and a certain resolution size with specific audio must be forced upon all connected equipment. Features: Stores EDID information from DVI displays Supports resolutions up to 1920x1200, 2K, and 3840x2400 (Dual Link) Keeps computer systems from deactivating inactive DVI ports Can eliminate CAT-5 lines used to carry DDC signals when extending computer video Passes HDCP copy-protection protocols for full HDTV, using an HDMI to DVI adapter (not included) No power required after initial programming Specifications: DVI Connector: DVI-I 29 pin female Power Supply: 5V DC Power Consumption: 5 Watts (max) Dimensions: 2.6 W x 1.3 H x 1.7 D Shipping Weight: 1 lbs Package Includes: (1) DVI-DL 1-foot cable (M-M) (1) 5VDC Power Supply (1) User Manual

Gefen DVI Over Fiber Extender Kit

The DVI FM1000 Extender extends your DVI display up to 3,280 feet (1km) away from your video source, with only two tiny transceivers required, using a 100% optical SC fiber solution with a single strand of fiber optic cable.

Gefen DVI to HDMI Converter

Convert DVI Video and Audio to HDMI The DVI Audio to HDMI Adapter is a unique device that combines digital video (DVI) and digital audio into HDMI to seemlessly integrate into the modern home theater. This adapter connects DVI home theater devices or DVI video graphic cards to HDMI compliant digital monitors. This adapter also takes digital audio and encodes it onto the HDMI signal for the full HDMI video and audio effect. With the DVI Audio to HDMI Adapter home theater devices and computer systems can be easily connected any HDMI display for the full digital video and audio experience. How It Works Simply connect the supplied DVI cable to the input side of the DVI Audio to HDMI Adapter. Then connect the SPDIF digital audio cable to the audio input of the DVI Audio to HDMI Adapter. Then connect the HDMI display or projector to the HDMI output of the DVI Audio to HDMI Adapter. The adapter encodes the digital audio onto the digital video signal to generate the HDMI signal. Features: Allows you to connect computers with DVI output and SPDIF to an HDMI display Encodes digital audio onto the video signal for HDMI video and audio Supports computer resolutions up to 1920x1200 at 60Hz Supports HDTV resolutions Supports resolutions up to 1080p, 2K, and 1920 x 1200 HDMI 1.2 compliant HDCP pass-through Specifications: Maximum Pixel Clock: 165 MHz (HDMI and DVI) HDMI Output Connector: (1) Type A 19 pin female DVI Input Connector: (1) DVI-I 29 pin female Audio Input Connector: (1) Coaxial (S/PDIF) Power Supply: 5V DC Power Consumption: 5 Watts (max) Dimensions: 3.2 D x 3.7 W x 1 H Shipping Weight: 2 lbs Package Includes: DVI Audio to HDMI Adapter One 5V Power Supply One 6 ft DVI Cable Users Manual

Gefen DVI to RGB Converter

The DVI to RGBS Scaler box takes your DVI-I computer video card/HDTV video signal and converts it to analog RGBS formats. Now you can display desktop or laptop computer and/or HDTV content on your analog RGBS display or projector. Available and selectable video formats include RGB, RGBS at sync 0.3V, RGBS at sync 5V, and YPbPr Component video.

Gefen DVI to VGA Converter

The Gefen DVI to VGA Converter is a small box solution that converts DVI-D to VGA Analog PC-RGB, enabling digital sources to connect with any monitor, projector or TV using VGA. Output resolutions up to 1920x1200 are supported. The Gefen DVI to VGA Converter features EDID management that allows rapid integration of the source and monitor.

Gefen DVI Video Wall Controller

Create a 2x2 video wall for digital signage applications. Play back video at trade shows, control center, indoor lobby and other venues. The Gefen DVI Video Wall Controller outputs a single DVI source onto four displays at up to 1920x1200p60. The Controller accomodates many displays and bezel sizes thanks to its border control feature. A built-in on-screen display OSD facilitates operations. An IR remote is included.

Gefen Audio-Video Scaler Pro

The Gefen Scaler Pro can interface with a variety of sources from set-top boxes and DVD players, to all popular video gaming consoles, with full 1080p support and compliancy with HDCP. Wide-screen scaling of VGA and DVI desktops is also achieved by the Gefen Scaler Pro.

Gefen HDMI Detective Plus

Save the EDID from your HDTV Display. Computers and HDTV video source devices can sometimes lose the EDID -- basically the electronic identification of a display which lists its possible resolutions and frequencies. When displays are switched away or disconnected and then reconnected, the EDID can be lost and the computer or HD video source device can lose the ability to display the image properly. The Gefen HDMI Detective Plus allows you to switch or relocate HDTV or Computer video displays while tricking the source devices into continuously reading the display information -- maintaining smooth video operations throughout the process. How It Works You simply program the HDMI Detective Plus for the display that you will use, by performing a programming step while having the device connected to the display and a power adapter. Next, you put it into place on the video output of your video source and restart your equipment. When all sources and displays are powered on, seamless functioning of video source and display equipment will commence. External buttons make EDID programming and settings operations a breeze -- formerly, some operations could require opening the unit. Features: Quick and easy saving of EDID information from HDTV displays Compact unit hides well behind equipment Selection of preset EDIDs for custom audio and resolution support. Maintains 1920 x 1200, 1080p, and 2k resolution video No power required after initial programming step HDCP Compliant Specifications: Video Amplifier Bandwidth: 340 MHz EDID Memory Size: 256 Bytes HDMI Connector: Type A ,19 pin female Power Supply / Consumption : 5V DC/ 5 watts (max) Dimensions: 2.6 W x 1.7 H x 1. D Shipping Weight: 1 lb

GefenTV HDMI to HDMI Plus Audio Converter

The GefenTV HDMI to HDMI Audio Converter is a product that takes a Hi-Def source using HDMI and outputs it to an HDTV display using HDMI and, in addition, up to 8 channels of LPCM audio output through eight RCA connectors. Bitstream is output to an Optical digital connector.

Gefen HDMI with IR over Fiber Optic Extender Kit

The HDMI 1.3 RS-232 IR Over One Fiber Extender is a complete solution using Sender and Receiver units to go the distance up to 1000 feet (300 meters) in length, while using only a single strand of multi-mode fiber terminated in SC connection for the extension. It extends all HDMI 1.3 features at 1080p Full HD with Deep Color, multichannel digital audio, supporting lip-sync, CEC, Dolby TrueHD, DTS Master Audio and other optional HDMI features including 3D.

Gefen HDMI over Single Cat6 Extender Kit

The Gefen Extender for HDMI 1.3 over one CAT6 will send a 1080p HDMI 1.3 signal, with Deep Color support, over a single CAT-6a cable at distances of up to 175 feet (50m). HDMI 1.2 is still fully supported and can be extended up to 200 feet (60m). Extension of high definition can now be simplified with the use of only a single CAT-6a cable. Previous solutions used 2 cables to accomplish this.

Gefen HDMI with Ethernet over Single Cat5e Extender Kit

The Extender for HDMI 1.3 over CAT5 with Ethernet extends your Hi-Def display with multi-channel digital audio at resolutions of up to 1080p60 up to 330 feet (100 meters) away from your HDMI or DVI-D source using one CAT-5 cable. It supports DVI-D when used with an HDMI to DVI Adapter, providing greater flexibility and options when integrating several home theater components. This product also extends Ethernet and provides an IR back channel to control AV sources using the same CAT-5 cable extension. With the built-in IR Blaster, simply point the IR remote(s) at the display to control the Hi-Def sources as if they were located in the same room as the display.

Gefen HDMI Over RGB Extender Kit

Extend HDMI at 1080p over Coax with support for HDMI 1.3. The Gefen HDMI over RGB Extender sends HDMI 1.3 with support for 1080p, Deep Color and multichannel 7.1 digital audio, all over legacy coaxial cabling. Integrated Gennum ActiveConnect technology delivers flawless, breathtaking digital audio/video at distances of up to 330 feet (100m). This is the ideal system for environments that are committed to an RGBHV infrastructure but would still like to step up to the world of digital HDTV. How It Works The supplied HDMI cable connects the HDMI source and the Gefen HDMI over RGB Extender Sender unit. The sender mates to your 4- or 5-jack coaxial cable, using the included 5V DC power supply if there are only 4 BNC jacks available. The HDMI over RGB Extender Receiver terminates the BNC extension, then connects to a HDTV. Pristine 1080p HDMI now emerges on the HDTV. Features: Connects HDMI sources to remote HDMI-capable display devices over legacy RGBHV cabling Supports extension distances of up to 150 feet Supports resolutions of up to 1080p, 2K, and 1920 x 1200 HDMI and HDCP compliant Extends any IR device Specifications: Video Amplifier Bandwidth: 340 MHz Video Resolutions (max): 2K, 1080P, 1920x1200 Coaxial Connectors: 5 x BNC male IR back channel : IR blaster HDMI(TM) Connector: Type A (19 Pin) Female Input Video Signal: 1.2V p-p Input DDC Signal: 5V p-p Power Supply: 5V DC / 10W each (max) power consumption Dimensions: 4.25 W x 1.25 H x 3.9 D Shipping Weight: 3 lbs.

Gefen Digital Audio Translator

The GefenTV Digital Audio Translator is a compact and convenient coaxial/TOSLINK audio converter that accepts an audio signal input through either coaxial (S/PDIF) or optical (TOSLINK) cable. Both outputs pass simultaneously. The GefenTV Digital Audio Translator can also act as an audio repeater unit, effectively doubling the digital audio distance. The input can be switched from S/PDIF to TOSLINK using the slide switch on the input side.

Gefen HDMI Super Booster Extender

Extend the range of copper HDMI cables. The Gefen Super Booster Plus for HDMI 1.3 allows the extension of HDMI 1.3 cables up to 100 feet and HDMI 1.2 cables 200 feet (60m) from the HDMI source. The Super Booster Plus supports displays up to 1080p and HDMI 1.3 features such as deep color and lossless audio formats. The Super Booster Plus model implements DDC reclocking which will make HDCP handshaking and EDID transmission more reliable over long distances of copper cable. How It Works Attach one end of your long HDMI cable to the HDMI source, then connect the other end of the long cable, near the display, to the input on the Gefen Super Booster Plus for HDMI 1.3. Connect the Display to the HDMI Super Booster Plus by attaching a cable between the display's HDMI input and the output on the Super Booster Plus. A beautiful HD picture will now be seen on the extended display. The Gefen Super Booster Plus for HDMI 1.3 and HDMI cables can also be cascaded with additional HDMI Super Booster Plus units and cables (a technique known as daisy chaining ) to create an even longer extension. Note: HDMI1.3 source material may be extended up to 100 feet from an HDMI-compliant display. The extension distance of 200ft at 1080p applies to HDMI1.2 source content only. This device is an HDCP pass-through device. HDMI 1.3 Features Supported: 225 MHz (up to 12 bit YUV 444 @ 1080p) Dolby TrueHD and DTS Master Deep Color Supported (XV Color) Lip-Sync Pass Through CEC Pass Through Features: HDCP pass-through and HDMI compliant Compact, portable unit installs in minutes Wall-powered for extra amplification power Based on proven Gefen Super Booster technology Daisy-Chaining ability allows long extensions DDC Robustness gives a stronger signal at long distances Specifications: Video Amplifier Bandwidth: 225 MHz Input Video Signal: 1.2 volts p-p Input DDC Signal: 5 volts p-p (TTL) Single Link Range: 1080p/1920 x 1200 HDMI Connector: type A 19 pin female Dimensions: 1.5 W x 1.1 H x 1.7 D Shipping Weight: 1 lb. Power Supply: 5Vdc / consumes 5W power (max)

Gefen HDMI to Composite Video Scaler

Watch HDMI Video on your Composite or S-Video System -- with Audio The new GefenTV HDMI to Composite Scaler lets you transform HDMI video in resolutions from 480p to 1080p into Composite video or S-Video format, properly sized to view optimally on your display. How It Works Simply connect your HDMI video source to the HDMI input jack of the GefenTV HDMI to Composite Scaler. Connect your Composite or S-Video display cable to the correct video output jack on the Scaler's rear panel. RCA-type analog audio output jacks and Coaxial S/PDIF digital audio output jacks allow for the connection of an audio receiver or other device to receive the audio signal embedded in the HDMI signal. Power-cycle all connected components. You will then have HDMI video playing on your Composite or S-Video display with simultaneous audio output. Note: This device does NOT convert HDCP. This device supports both NTSC and PAL video standards. This device maintains the aspect ratio of the original signal. The main purpose for the GTV-HDMI-2-COMPSVID is to downscale high definition video to standard definition NTSC / PAL, from digital to analog TV signals. The GTV-HDMI-2-COMPSVID does not accept standard-resolution 15KHz (Horizontal Frequency) video signals as input (i.e. 480i and 576i resolutions). Source devices operating at resolutions of 480i / 576i will very likely have analog outputs which can be used to directly connect to display devices in these cases. Supported HDTV input resolutions include: 480p@60Hz 576p@60Hz 720p@60Hz 1080i/p@60Hz Supported PC input resolutions include: 640x480@60Hz 800x600@60Hz 1024x768@60Hz 1280x1024@60Hz 1600x1200@60Hz 1920x1200@60Hz Features: HDMI to Composite / S-Video conversion plus scaling Supports HDTV input resolutions of 480p up to 1080p at 50/60 Hz and computer resolutions from VGA to UXGA at 60Hz. Outputs 480i / 576i signal for Composite/S-Video Supports both NTSC and PAL formats Specifications: Input Video Signal: 1.2V p-p Input Sync Signal: 5V p-p (TTL) Video In/Out: (1) HDMI 19-pin Female, type A Video In/Out: (1) Composite RCA female jack / (1) S-Video female Mini-DIN connector Audio In/Out: (2) L/R RCA audio, (1) S/PDIF digital audio jack, female coaxial Horizontal Frequency Range: 31-70 KHz Vertical Frequency Range: 50-60 KHz Power Consumption: 13 Watts (maximum) Power Supply: 5V DC Dimensions: 7 W x 1 H x 4 D Shipping Weight: 4 lbs. Package Includes: (1) HDMI to Composite Scaler (1) 6-foot HDMI Cable (Male-Male) (1) 5V DC Power Supply

Gefen High-Def Personal Video Recorder

GefenTV Hi-Def Personal Video Recorder uses a built-in hard drive and SD flash cards, with standard MPEG-4 compression and H.264 encoding technology The Gefen High-Definition Personal Video Recorder (HD-PVR) allows consumers to implement the functions of a traditional video tape recorder or DVD recorder, but in an exciting new way using state-of-the-art removable SD flash memory devices and/or a built-in 80GB hard disk drive. Now, consumers can enjoy instant recording and versatile portability of digital video and music, as well as playback of music and digital pictures, all within one compact tabletop unit. No More Missed Action! You won t miss the action any more with the Gefen HD-PVR. With a touch of the IR Remote, you ll be able to instantly begin recording programs or video segments when inspiration strikes you. With the capacity to review, fast forward, fast backwards, pause, and erase videos, you ll have unprecedented flexibility in capturing what you want and keeping only what you need. Your Personal Multimedia Playback Center The Gefen HD-PVR is not just for recording video. You can scan storage devices for the contents that you want, and play music, look at digital picture albums, or play back previously recorded clips. How It Works The HD-PVR is easy to use. Connect your video source(s) to one or all of the HD-PVR's 4 inputs, then connect your HDMI-compliant display on its HDMI output. Once the source(s), the HD-PVR and the display are powered and connected, you select the video source and feature that you want using the Infra-Red (IR) remote. If you want to modify settings for instant recording and other features, you can go into the friendly On-Screen Display and adjust the settings. Four quality settings are user-selectable ranging from 3.5Mbps to 10Mbps for Hi-Def content and 1.5Mbps to 4Mbps for Standard Definition formats. Recording time can be increased by selecting lower throughput rates (in Megabits / second), while recording quality can be maximized by choosing high throughput rates. The GTV-HD-PVR records in MPEG4 format video using H.264 encoding with compressed 2-channel stereo sound. Recordings can be made separately to either the internal hard drive or SD flash card. Digital video recorded on the SD card can be played on any computer with MPEG4 drivers installed. Drivers to play MPEG4 / H.264 content are commonplace. Note: This device will not allow an HDCP encrypted source to be recorded. For an input of 1080i, the device actually saves the recording at 1440x1080i, but plays back at 1080i. This is an encoding chip limitation. Features: Video recording and playback at resolutions of 480i to 1080i Instant Recording to SD Flash Media or Internal Hard Disk Drive Pause, Mute, Fast Forward and Fast Backwards playback controls Media Scanning Function to Locate Videos, Audio Files, Pictures Playback of externally imported videos, music, pictures 4 different quality settings for storage compression Friendly Graphical Interface for controlling Settings Records in standard MPEG4 format with stereo audio 2x-10x Picture Zoom for viewing Photos International language support Specifications: Video Amplifier Bandwidth: 165 MHz Input Video Signal: 1.2 volts p-p Input DDC Signal: 5 volts p-p (TTL) Max Resolution Supported: 1080i A/V Input Connectors: Composite (TV), S-Video, Component, HDMI Audio Connections: Analog L/R, input and output A/V Output Connectors: HDMI 19-pin female Type A High Definition recording throughput rate: 3.5Mbps to 10Mbps Standard Definition recording throughput rate: 1.5Mbps to 4Mbps Power Consumption: 20 watts (maximum) Remote Control : Infra-Red handheld type Dimensions: 6.9 W x 2.1 H x 6.9 D Shipping Weight: 5 lbs.

Gefen Long-Range Wireless VGA Extender

Extend VGA with L/R audio up to 100 feet at 1280x1024 resolution wirelessly The Wireless VGA Extender LR allows a VGA display or projector to be conveniently located up to 100 feet away from the source. The Wireless VGA Extender LR features signal transmission through walls at resolutions of up to 1280x1024, using industry-proven 2.4GHz 802.11b/g/n Wireless network technology. The Extender can be operated on any one of 4 channels to minimize interference. How It Works This product is a plug-and-play solution. No special configuration is necessary. The Wireless VGA Extender LR system consists of a Sender and a Receiver. The Sender is connected to the VGA source with a VGA cable. The Receiver is connected to the display with a VGA cable. 12V external power supplies are connected to the Sender and the Receiver. Note: Supported A/V input sources also include Component, S-Video and Composite Video. A/V sources can be individually selected by pressing the Source Selector button on the front panel of either the Sender unit or the Receiver unit. The current wireless channel can be selected in the same way with the Channel Selector button. Supported resolutions are as follows: A/V Input Formats: 1. CVBS : NTSC / PAL / SECAM: 480i@60Hz, 576i@50Hz 2. S-Video : NTSC / PAL / SECAM: 480i@60Hz, 576i@50Hz 3. Y/Pb/Pr : 480i/p@60Hz, 576i/p@50Hz , 720p@50/60Hz, 1080i/p@50/60Hz. 4. VGA : 640x480@60Hz, 800X600@60Hz, 1024X768@60Hz, 1280X768@60Hz, 1280X1024@60Hz Output Formats and Frequencies: 1. Y/Pb/Pr: 480p@60Hz, 576p@50Hz, 720p@60Hz 2. VGA: 640x480@@60Hz, 800X600@60Hz, 1024X768@60Hz, 1280X768@60Hz, 1280X1024@60Hz Some resolutions will have half the usual frame rate due to bandwidth considerations. These include Y/Pb/Pr resolutions of 720p or above and all VGA resolutions. Features: Wireless extension of VGA up to 100 feet Maximum Input Resolutions: 1080p@60Hz (Y/Pb/Pr), 1280x1024@60Hz (VGA), 480i@60Hz, 576i@50Hz (SVideo, Composite) Maximum Output Resolutions: 720p@60Hz (Y/Pb/Pr), 1280x1024@60Hz (VGA), 480i@60Hz, 576i@50Hz (SVideo, Composite) Switch between four audio/video sources from the sender's location Plug-and-Play installation with no special configuration required 4 wireless channels for resistance to interference L/R Analog Audio supported Specifications: Wireless Standard: IEEE 802.11b/g/n Antenna Type: External Dipole antenna 2dBi PCM Encoding: 48KHz 16-bit sampling Power Supply: 2 x 12V @ 1A each Audio Inputs/Outputs: 3.5mm mini-stereo jacks Video Inputs: Composite and S-Video : NTSC / PAL / SECAM Y/Pb/Pr : 480i/p , 576i/p, 720p@50/60Hz, 1080i/p@50/60Hz VGA : 640x480@60Hz, 800X600@60Hz, 1024X768@60Hz, 1280X768@60Hz, 1280X1024@60HzVideo Outputs: Y/Pb/Pr: 480p@60Hz, 576p@50Hz, 720p@60Hz VGA: 640x480@60Hz, 800X600@60Hz, 1024X768@60Hz,1280X768@60Hz,1280X1024@60Hz Switchable 802.11b/g/n Channels: 3, 6, 9, 11 Operating Temperature: 0-40 C ambient temperature Operating Humidity: 90% maximum (non-condensing) Dimensions: 7.05 (L) x 4.17 (W) x 0.9 (H) per unit .

Gefen Short-Range VGA over Cat5 Extender

The VGA Extender SRN allows users to extend video signals far beyond the A/V rack. The VGA Extender SRN can be used to extend an analog VGA signal to cover distances up to 150 feet. Industry standard Category 5e CAT-5e cable is used for the extension.

Gefen Short-Range Wireless VGA Extender

Extend VGA with L/R audio up to 30 feet at 1280x1024 resolution wirelessly. The Wireless VGA Extender SR allows a VGA display or projector to be conveniently located up to 30 feet away from the source. The Wireless VGA Extender SR features signal transmission through walls at resolutions of up to 1280x1024, using industry-proven 2.4GHz 802.11b/g/n Wireless network technology. The Extender can be operated on any one of 4 channels to minimize interference. How It Works This product is a plug-and-play solution. No special configuration is necessary. The Wireless VGA Extender SR system consists of a Sender and a Receiver. The Sender is connected to the VGA source with a VGA cable. The Receiver is connected to the display with a VGA cable. 12V external power supplies are connected to the Sender and the Receiver. Note: Supported A/V input sources also include Component, S-Video and Composite Video. A/V sources can be individually selected by pressing the Source Selector button on the front panel of either the Sender unit or the Receiver unit. The current wireless channel can be selected in the same way with the Channel Selector button. Features: Wireless extension of VGA up to 30 feet Maximum Input Resolutions: 1080p@60Hz (Y/Pb/Pr), 1280x1024@60Hz (VGA), 480i@60Hz, 576i@50Hz (SVideo, Composite) Maximum Output Resolutions: 720p@60Hz (Y/Pb/Pr), 1280x1024@60Hz (VGA), 480i@60Hz, 576i@50Hz (SVideo, Composite) Can switch amongst up to four audio/video sources at the display Plug-and-Play installation with no special configuration required 4 wireless channels for resistance to interference L/R Analog Audio supported Specifications: Wireless Standard: IEEE 802.11b/g/n Antenna Type: Internal Dipole antenna 2dBi PCM Encoding: 48KHz 16-bit sampling Power Supply: 2 x 12V @ 1A each Audio Inputs/Outputs: 3.5mm mini-stereo jacks Video Inputs: Composite and S-Video : NTSC / PAL / SECAM Y/Pb/Pr : 480i/p , 576i/p, 720p@50/60Hz, 1080i/p@50/60Hz .

Gefen TV Multi Format Switcher

The rack-mountable TV Multi Format Switcher allows you to view a wide variety of analog and digital SD and HD video sources with audio at resolutions up to 1080p -- all on one HDMI-compliant display. Anything from computers, set-top boxes, satellite boxes, security cameras, Blu-ray and DVD players to the next generation of hi-def gaming consoles (including the Xbox 360 and PS3) can share a single HDMI-compliant display. Superior A/V signal quality is insured by the 3D comb filter and 3D noise reduction circuitry. The audio delay feature and de-interlacing feature for 480i sources improves Standard-Definition console gaming.

Gefen USB 2.0 Over Cat5 Extender

Extend USB 2.0 over CAT5 up to 330 feet (100m) -- quickly and economically Gefen's USB 2.0 LR extends high-speed USB devices simply and reliably. The compact USB 2.0 LR Sender/Receiver units install in minutes and fully support all USB versions (V1.1 and V2.0), at speeds of up to 480 mbps -- essential for high-performance applications such as digital imaging and interactive gaming. The two-port USB 2.0 LR hub is ideal for remotely accessing laser printers, scanners, web cameras, external hard drives, CD/DVD burners, and flash drives. Additional applications include security, industrial control, digital signage, scientific data acquisition and much more due to the universal implementation of USB standards. How It Works Gefen's USB 2.0 LR Sender unit connects to the host (for example, a computer). The Receiver unit is connected to USB device(s) at the desired extended location. A CAT5 cable is installed between the two modules. The 5V power supply is attached to the Receiver. Any USB device(s) plugged into the Receiver are now seen by the host. LEDs on the Sender and Receiver units indicate power, CAT5 link status, and data transmission activity. Note: Gefen's USB 2.0 LR supports all major operating systems -- Windows, MacOS and Linux. No software drivers are required. A powered USB hub may be connected to the USB 2.0 Extender LR Receiver to allow more USB devices to be extended. A maximum of 14 USB devices (including hubs) may be connected to the USB 2.0 LR Receiver. Features: Operate USB 2.0 peripherals up to 330ft (100m) from a computer Supports low and high-speed USB Uses industry-standard CAT5, CAT5e, or CAT6 cable Supports all major operating systems -- Windows, MacOS and Linux. True plug-and-play, 100% hardware solution with no drivers required Operates at full 480 Mbps speed when running in USB 2.0 mode Receiver supports up to 2 USB powered connections at 500 mA each Specifications: USB 2.0 Speed: 480 Mbps Link Connectors: RJ-45 Shielded USB Connectors: Transmitter: (1) USB type B USB Connectors: Receiver: (2) USB type A Dimensions of Transmitter: 1.5 W x 1.2 H x 3.3 D Dimensions of Receiver: 3.4 W x 1.1 H x 1.3 D Two 500 mA DC powered USB ports at Receiver Power Supply: External 5V DC @ 10W max. power consumption Operating Temperature: 0-70 C Unit Weight: Transmitter: 0.16 lbs. Unit Weight: Receiver: 0.44 lbs. Shipping Weight: 2 lbs. .

Gefen 60 GHz Wireless HDMI Extender Kit

The Wireless for HDMI 60 GHz Extender extends high-quality uncompressed HDMI audio/video at resolutions of up to 1080p/60 Hz to any remote display location up to 30 feet away without the hassle of wires.

GefenTV Ethernet Over Coax Extender

The Gefen Ethernet Over Coaxial Sender and Receiver units send RJ-45 Ethernet over RG-59 or RG-6 Coax cable at a distance of up to a 1000 feet.

GefenTV High-Definition Scaler

The GefenTV High-Definition Scaler allows you to upscale and switch your standard definition or high definition component sources to resolutions up to 1080p. Anything from set-top boxes, DVD players to the next generation of gaming consoles including the Xbox 360 and PS3 can be plugged into the GefenTV High-Definition Scaler.

Gefen UWB Wireless HDMI Extender Kit

The Gefen Wireless HDMI Extender is the perfect solution for sending up to three High Definition AV sources to any one location without the hassle of wires. The Gefen Wireless HDMI Extender is able to accomplish this by employing Ultra-Wideband (UWB) technology to send the large amounts of data required by the HDMI standard. Up to a 30 foot line-of-sight distance (less if going through a wall to an adjacent room) is achievable with resolutions of up to 1080p at 30 supported.

Gefen VGA with Audio over Cat5e Extender

The VGA Extender with LR Audio extends a VGA computer video and analog LR audio up to 150 feet over just one CAT5 cable. The Sender hooks up to the computer and the Receiver connects to the remotely extended VGA display and control devices such as keyboard, mouse, and audio devices. By choosing widely available CAT5e cable for extension, Gefen has made installation simple and flexible. The CAT5e cable can be tucked under carpet or run above a ceiling.

Gefen VGA Over Cat5e LR Extender Kit

Extends any VGA or Component HD display using a Single CAT-5 cable up to 330 feet from your HD source The VGA Extender allows users to extend video signals beyond the A/V rack. The VGA Extender Series can be used to extend an analog signal to cover distances up to 330 feet. Industry standard Category 5e (CAT-5e) cable is used for the extension. How It Works The VGA Extender LR sender unit connects to your source using the supplied cable. The receiver unit connects to your display - up to 330 feet away. One CAT-5 cable connects the sender and the receiver to each other, extending your video flawlessly. Note: This is a new VGA Extender that goes double the distance of the previous version, and also has a trim-pot for fine video adjustment. Features: Extends any VGA or high definition component display up to 330 feet (100 meters) One CAT-5e cable for extension Supports resolutions up to 1080p, 2K, and 1920 x 1200 Specifications: Video Amplifier Bandwidth: 350 MHz Input Video Signal: 1.2 volts p-p Input Sync Signal: 5 volts p-p (TTL) Horizontal Frequency Range: 15-70 KHz Vertical Frequency Range: 30 - 170 Hz Video In: HD-15 male Video out: HD-15 female Link Connector: RJ-45 Shielded Power Supply: 5V DC Power Consumption: 5 watts (max.) Dimensions: 3.7 W x 1.8 H x 1.4 D each module Shipping Weight: 2 lbs. Package Includes: (1) VGA Extender S Sender Unit (1) VGA Extender R Receive Unit (1) 6 foot VGA cable (M-F) (1) 5V DC power supply

Gefen VGA to DVI Scaler Plus

The VGA to DVI Scaler PLUS connects traditional analog video graphic cards (VGA) to DVI compliant digital monitors. The VGA to DVI Scaler PLUS enables users to connect laptops or legacy PC computers equipped with HD-15 video connections to the DVI (digital visual interface) video display format. The VGA to DVI Scaler PLUS will also work with component video sources such as DVD players and set top boxes. You can even add a converter cable to achieve HDMI video, or go further and merge external audio sources with the HDMI signal to create HDMI video with embedded digital audio

Gefen VGA to HDMI Scaler

Upscale an analog video signal from a computer or VGA source to a high quality digital HD display. The Gefen VGA Audio to HDMI Scaler supports a range of video resolutions up to 1080p. Also, it will take digital TOSLINK or analog 3.5mm mini-Stereo audio as input, and simultaneously output the audio signal in the same format. A comprehensive on-screen display (OSD) menu allows intuitive control over a range of A/V operations.

Grado The Reference1 Phono Cartridge

The newly redesigned Master1 and Reference1 cartridges have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. All this is hand-assembled within a machined, new processed, Australian Jarrah wood housing. The Master1 and Reference1 models use a five piece OTL cantilever technology achieving an additional 5% tip mass reduction over the Platinum1 and Sonata1 models. The coils are wound with ultra-high purity long crystal (UHPLC) oxygen free copper wire. The Master1 model is mounted with Grado's specially designed nude elliptical diamond, and the Reference1 model uses Grado's true ellipsoid design diamond. Frequency Response 10-60 Principal MI Channel Separation at 1KHz 40 Imput Load 47K Output at 1KHz 5CM/sec. 5mV Recommended Tracking Force 1.5 Stylus Type E Inductance 45mH Resistance 475 Compliance CUs 20 Stylus Replacement F=Factory F Mounting S Weight 6.5 For Sale to US Customers Only .

Grado The Statement1 Phono Cartridge

After years of careful thought and painstaking design Grado is very pleased to offer their upgraded flagship phono cartridge. We are so proud of this cartridge and believe that it has so much to say about Grado technology, that it was named the GRADO STATEMENT1. The STATEMENT1 utilizes reconfigured gold coil wires, a lower mass faster generating system, a boron cantilever and a diamond cut specially for Grado. All this is hand-assembled within a machined, new processed, Australian Jarrah wood housing. The output for the STATEMENT1 measures at 0.5 mV. The lowest output ever offered by Grado. The low frequency information and its portrayal of bass dynamics are solid, powerful and authoritative. The midrange is rich, complex and highly believable. Its top-end seems to extend forever with speed and remarkable delicacy. Imaging is detailed and precise with a sound stage that wraps its arms around you and draws you into the music. Michael Fremer commented in his Analog Corner, It is among the finest cartridges I ve ever heard at any price , Stereophile 3/99, pg. 41. While Jonathan Valin stated, I m going to keep the Statement in my reference system The Absolute Sound, Issue 118. Anyone who was impressed with our previous top-of-the-line effort, the Grado REFERENCE, will have their eyes opened wide after listening to the GRADO STATEMENT1! Channel Separation at 1KHz 45 Imput Load 47K Output at 1KHz 5CM/sec. 0.5mV Recommended Tracking Force 1.5 Stylus Type E Inductance 2mH Resistance 2 Compliance CUs 20 Stylus Replacement F=Factory F Mounting S Weight 7 For Sale to US Customers Only .

Grado G-Cush Replacement Headphones Cushions

Designed to fit Grado Headphones G-Cush (fits GS1000, PS1000, GS1000i) Sold in pairs, priced per pair For Sale to US Customers Only .

Grado GR8 In-Ear Headphones

A proprietary wide bandwidth moving armature design provides the listener with unsurpassed performance. Small size allows earphone to nestle well within the ear canal, maintaining an excellent air seal for improved bass and reduction of outside noise without causing discomfort. Features: Raised dot on left earphone provides tactile indication of channel allowing earphones to be put on correctly even in the dark. Included: 3 pair ear tips (small, medium, large; proprietary blend of two silicon rubber materials) Ear wax proof cloth x4 Ear wax proof cloth ring x2 Driver Moving armature Connector type standard mini plug (gold over brass) Frequency range 20 -20,000 Hz Sensitivity 118db/1mw Impedance 120 ohms Maximum input power 20mW Cable Length 51 /130mm (oxygen-free copper wire) Weight 9 grams including plug and cord For Sale to US Customers Only

Grado GR10 In-Ear Headphones

Grado GS-1000i Headphones

What does the i stand for in the new GS1000i from Grado? Improved, that’s what! Featuring a new species of handcrafted Mahogany earpieces made using an intricate curing process; Grado has been able to optimize the tonal quality. The GS1000i uses new upgraded dynamic transducers and the new 8 conductor cable design. All this, new wood, driver and cable designs result in improved control and stability of the upper and lower range of the frequency spectrum with both better supporting the GS1000i’s new world renowned midrange. Grado’s GS1000i cushion design actually creates a room for the ears to sit, creating a larger soundstage and greater spatial experience for the listener. It was most important to design the correct balance between the driver and our wooden driver housing to give us the resulting sound that we desired. This has been accomplished. By creating this room for the ears to sit, positioning of the cushions with regards to the ears (i.e., forward or back) is somewhat critical in finding the absolute sweet spot. With this cushion design, we believe the GS1000i to be one of the most comfortable headphones on the market today. The GS1000i retains a sound that is pure Grado, rich full-bodied vocals, excellent dynamics and an ultra smooth top end. The presentation is very detailed, the bass is deep and the music is very tight and non-fatiguing. All with a soundstage that is huge allowing for unbelievable separation and layering of the music which is simply stunning. Features: Vented diaphragm Wooden air chamber UHPLC copper voice coil wire UHPLC copper connecting cord Tranducer type dynamic Operating principle open air Frequency response 8-35 SPL 1mV 98 Normal impedance 32ohms Driver matched db .05 For Sale to US Customers Only

Grado Headphones Extension Cables

Grado offers a 15 foot (450cm) extension cable terminated with a 1/4 inch (6.3mm) plug and a 1/4 inch (6.3mm) jack. This cable is constructed from the same high quality wire as their headphone cable. For longer lengths the cable may be piggy-backed up to 3 cables. Grado guarantees no degradation of sonic quality with Grado headphones while using their extension cable. Cord Length: 15 ft Connections: 1/4 inch male to 1/4 inch female For Sale to US Customers Only .

Grado Headphones Mini Adapter Cables

Grado offers a mini adapter cable that converts a 1/4 inch (6.3mm) plug to 1/8 inch (3.5mm) plug. The mini adapter cable has a 1/8 inch (3.5mm) plug then 8 inches (20cm) of cable connected to a 1/4 inch (6.3mm) jack. The 8 inches (20cm) of cable eliminates added leverage on the output circuit board of the source. The mini adapter cable is constructed of the same high quality wire as their headphone cable. Grado guarantees no degradation of sonic quality with Grado headphones while using their mini adapter cable. Termination: 1/8 male to 1/4 female For Sale to US Customers Only .

Grado Headphones Y-Adaptor Cables

Grado offers a Y adaptor cable that will allow the listening of two headphones from one headphone output. The cable has a 1/4-inch (6.3mm) plug to twin 1/4-inch (6.3mm) jacks. The 8 inches (20cm) of cable, between the plug and jacks, eliminates added leverage on the output circuit board of the source. The Y adaptor cable is constructed of the same high quality wire as their headphone cable. Grado guarantees no degradation of sonic quality with Grado headphones while using their Y adaptor cable. Termination: 1/4 Male to Double 1/4 Female For Sale to US Customers Only

Grado i-Cush Replacement Headphones Cushions

Designed to fit Grado Headphones i-Cush (fits iGrado Headphones) Sold in pairs, priced per pair For Sale to US Customers Only ..

Grado iGi In-Ear Headphones

A proprietary wide bandwidth dynamic design provides the listener with unsurpassed performance. Small size allows earphone to nestle within the ear canal, maintaining an excellent air seal for improved bass and reduction of outside noise without causing discomfort. Features: Raised dot on left earphone provides tactile indication of channel allowing earphones to be put on correctly even in the dark. Included: 4 sizes of ear tips When Grado Labs sets out to design a new product, the most important goal is to be faithful to the music so that the listener’s experience truly results in a smile. This sensitivity is the soul of the iGi. Grado Labs has invested countless hours of design engineering and listening tests to bring to you a fantastic and affordable in-ear headphone. We invite you to replace the earbuds that came with your portable music player. You will find a refreshing new window into your music. Happy Listening! Driver Dynamic Connector type standard mini plug (gold over brass) Frequency range 20 -20,000 Hz Sensitivity 105db/1mw Impedance 24 ohms Maximum input power 30mW Cable Length 51 /130mm (oxygen-free copper wire) Weight 9 grams including plug and cord For Sale to US Customers Only .

Grado L-Cush Replacement Headphones Cushions

Designed to fit Grado Headphones L-Cush (fits SR225, SR325, RS2, RS1, SR225i, SR325is, RS2i, RS1i) (also fits SR60, SR80, SR125, SR60i, SR80i, SR125i) The L-Cush is the open design. For enclosed design, the S-Cush will also fit. Sold in pairs, priced per pair For Sale to US Customers Only .

Grado PH-1 Phono Preamplifier

Our new Grado Phono Preamp, model PH-1, represents the most successful solution to one of the most complex technical challenges in the field of audio that Grado Labs has ever tackled. It can be compared to the undertaking of designing our highly acclaimed phono cartridges, headphones and our world renowned RA-1 headphone amplifier over the past several years. Our design goals were for a truly superb sounding phono preamp to work equally well with both low and high output cartridges with negligible noise. We wanted a phono preamp with ultra wide band pass, high overload, virtually perfect RIAA amplitude and phase coherency, and very low output impedance. This was the challenge set forth! This we have accomplished! We realized immediately that a challenge like this was not going to be met by using either of the time-honored methods of passive or active equalization circuits. The relative advantages and disadvantages of these old methods are very well known: the passive preamp approach is characterized by problems of first stage headroom and second stage noise. This is due to the 40dB high frequency insertion-loss of the passive network itself. Phono stage gain is frequency dependent with the result of too little feedback at the low end and too much at the high end. Of course, both extremes are sonically non-optimum and unacceptable. The more commonly used active equalization stage provides solutions to the classic passive circuit problems, but it also comes with a whole new set of its own problems. These difficulties arise out of the subtle ramifications of the classic negative feedback theory. The RIAA characteristic requires that the amplifier's closed-loop gain needs to change by a hundred to one (40dB) over the entire audio range. This means too little feedback-closure at low frequencies and too much at high frequencies. Too little causes inadequate suppression of simple distortions, and too much causes the generation of complex distortions (high-order). The new Grado phono preamp circuit design now has all of the advantages of the old methods, yet none of its antiquated disadvantages! The challenge was met! The processing problem has been split into two separate parts: a forward propagating signal current and a back propagating error voltage. We have indeed eliminated all of the past methods. Our new phono equalization technique is a derivative of the principals that we used in our highly regarded RA-1 headphone amplifier. In this design, feedback closure ratio does not change with frequency, but the total output gain does. Virtually all latter stage noise disappears! The output impedance is very low, with the EQ stage opened-loop and the closed-loop gain being the same. The best of both worlds! What is so significant about these new innovations is the fact that the technical superiority claims absolutely correlate to an unprecedented improvement in openness, greater depth of field and increased definition to the sound of each musical instrument. The PH-1 offers a true freedom from past sonic problems along with Grado's usual warm, smooth, full bodied, non-fatiguing and rich sound qualities that everyone has embraced. If your turntable is driven with a Grado cartridge then you deserve to go the final step with the new PH-1 phono preamp. For Sale to US Customers Only

Grado Prestige 78C Phono Cartridge

The Prestige Series of 78-RPM cartridges are designed for high output and excellent stability under even severe use. Each cartridge can be used for either archival or casual play without concern for undue wear on the record. All Grado 78 cartridges have a considerable reduction in tip mass resulting in extended frequency response while tracking forces can range from 2-5 grams. The experts acclaim these cartridges as virtually the finest 78-rpm cartridges in the world. The Prestige model 78C uses a three-piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished conical/spherical 3 mil. diamond mounted in a brass bushing. Frequency Response 10-50 Principal MI Imput Load 47K Output at 1KHz 5CM/sec. 5mV Recommended Tracking Force 2-5 Stylus Type - 78C C Stylus Type - 78E C Inductance 45mH Resistance 475 Stylus Replacement U=user U Mounting S/P Weight 5.5 For Sale to US Customers Only .

Grado Prestige 78E Phono Cartridge

The Prestige Series of 78-RPM cartridges are designed for high output and excellent stability under even severe use. Each cartridge can be used for either archival or casual play without concern for undue wear on the record. All Grado 78 cartridges have a considerable reduction in tip mass resulting in extended frequency response while tracking forces can range from 2-5 grams. The experts acclaim these cartridges as virtually the finest 78-rpm cartridges in the world. The Prestige model 78E uses a modified four piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished, conical/spherical 3 mil. diamond mounted in a brass bushing. Frequency Response 10-50 Principal MI Imput Load 47K Output at 1KHz 5CM/sec. 5mV Recommended Tracking Force 2-5 Stylus Type - 78C C Stylus Type - 78E C Inductance 45mH Resistance 475 Stylus Replacement U=user U Mounting S/P Weight 5.5 For Sale to US Customers Only .

Grado Prestige Black1 Phono Cartridge

The newly redesigned Black1 and Green1 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Black1 and Green1 models use a three piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted in a brass bushing. The Green1 model is selected from the Black1 production run and meets higher test specifications. Approximately 15% of the production run will meet these standards and become Green1 models. Frequency Response 10-50 Principal MI Channel Separation at 1KHz 30 Imput Load 47K Output at 1KHz 5CM/sec. 5mV Recommended Tracking Force 1.5 Stylus Type E Inductance 45mH Resistance 475 Compliance CUs 20 Stylus Replacement U=user U Mounting S/P Weight 5.5 For Sale to US Customers Only .

Grado Prestige Blue1 Phono Cartridge

The newly redesigned Blue1 and Red1 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Blue1 and Red1 models use a four piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Red1 model is selected from the Blue1 production run and meets higher test specifications. Approximately 10% of the production run will meet these standards and become Red1 models. Frequency Response 10-55 Principal MI Channel Separation at 1KHz 30 Imput Load 47K Output at 1KHz 5CM/sec. 5mV Recommended Tracking Force 1.5 Stylus Type E Inductance 45mH Resistance 475 Compliance CUs 20 Stylus Replacement U=user U Mounting S/P Weight 5.5 For Sale to US Customers Only .

Grado Prestige DJ100i Phono Cartridge

Grado Labs announces the release of their new DJ series of professional phono cartridge. Built and designed to meet the demanding needs of the professional DJ musician, these cartridges deliver performance never known before in the pro DJ market. The Grado specially engineered transmission line cantilever allows for the ideal transfer of music signal and for safe and effective stylus back-cueing. The DJ series can track from 2 to 5 grams, and delivers the warm musical Grado sound the audio industry has embraced and enjoyed for 50 years. The DJ series incorporates our newest Flux-Bridger generator systems for lower effective tip mass and lower electrical inductance. Each DJ series cartridge is hand assembled to Grado's high standards, which contributes to the unchallenged consistency of performance, and the Grado guarantee of reliability. The DJ series of cartridges are the most advanced phono pickups ever offered to the professional DJ market, without exception. The Prestige model DJ100i uses a three-piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished, diamond mounted in a brass bushing. Frequency Response 10-50 Principal MI Imput Load 47K Output at 1KHz 5CM/sec. 5mV Recommended Tracking Force 2-5 Channel Separation at 1KHz 30 Stylus Type Diamond Inductance 45mH Resistance 475 Compliance CUs Stylus Replacement U=user U Mounting S/P Weight 5.5 For Sale to US Customers Only .

Grado Prestige DJ200i Phono Cartridge

Grado Labs announces the release of their new DJ series of professional phono cartridge. Built and designed to meet the demanding needs of the professional DJ musician, these cartridges deliver performance never known before in the pro DJ market. The Grado specially engineered transmission line cantilever allows for the ideal transfer of music signal and for safe and effective stylus back-cueing. The DJ series can track from 2 to 5 grams, and delivers the warm musical Grado sound the audio industry has embraced and enjoyed for 50 years. The DJ series incorporates our newest Flux-Bridger generator systems for lower effective tip mass and lower electrical inductance. Each DJ series cartridge is hand assembled to Grado's high standards, which contributes to the unchallenged consistency of performance, and the Grado guarantee of reliability. The DJ series of cartridges are the most advanced phono pickups ever offered to the professional DJ market, without exception. The Prestige model DJ200i uses a modified four piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished, diamond mounted in a brass bushing. Frequency Response 10-50 Principal MI Imput Load 47K Output at 1KHz 5CM/sec. 5mV Recommended Tracking Force 2-5 Channel Separation at 1KHz 30 Stylus Type Diamond Inductance 45mH Resistance 475 Compliance CUs Stylus Replacement U=user U Mounting S/P Weight 5.5 For Sale to US Customers Only .

Grado Prestige Gold1 Phono Cartridge

The newly redesigned Silver1 and Gold1 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Silver1 and gold1 models use a four piece OTL cantilever technology, ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Gold1 model is selected from the Silver1 production run and meets higher test specifications. Approximately 5% of the production run meet these standards and become Gold1 models. Frequency Response 10-60 Principal MI Channel Separation at 1KHz 35 Imput Load 47K Output at 1KHz 5CM/sec. 5mV Recommended Tracking Force 1.5 Stylus Type E Inductance 45mH Resistance 475 Compliance CUs 20 Stylus Replacement U=user U Mounting S/P Weight 5.5 For Sale to US Customers Only .

Grado Prestige Green1 Phono Cartridge

Grado Prestige MC+ Mono Phono Cartridge

There are many analog lovers with record collections that include mono albums. At Grado we strive to have products that will fit all the needs of the analog enthusiast. So now, Grado offers two new cartridge models in a mono version. The MC+ and the ME+ are mounted with an elliciptical diamond. The ME+ uses one of GRADO's upgraded generating systems. All wooden body cartridges are available in mono version. This will make your records quieter and enhance the musical pleasure of these recordings. The Prestige model MC+ uses a three-piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished elliptical diamond mounted in a brass bushing. Frequency Response 10-50 Principal MI Imput Load 47K Output at 1KHz 5CM/sec. 5mV Recommended Tracking Force 1.5 Stylus Type - MC+ E Stylus Type - ME+ E Inductance 45mH Resistance 475 Stylus Replacement U=user U Mounting S/P Weight 5.5 For Sale to US Customers Only .

Grado Prestige ME+ Mono Phono Cartridge

There are many analog lovers with record collections that include mono albums. At Grado we strive to have products that will fit all the needs of the analog enthusiast. So now, Grado offers two new cartridge models in a mono version. The MC+ and the ME+ are mounted with an elliciptical diamond. The ME+ uses one of GRADO's upgraded generating systems. All wooden body cartridges are available in mono version. This will make your records quieter and enhance the musical pleasure of these recordings. The Prestige model ME+ uses a modified four piece OTL cantilever technology, oxygen free wire in the coils and a specially designed, high polished, elliptical diamond mounted in a brass bushing. Frequency Response 10-50 Principal MI Imput Load 47K Output at 1KHz 5CM/sec. 5mV Recommended Tracking Force 1.5 Stylus Type - MC+ E Stylus Type - ME+ E Inductance 45mH Resistance 475 Stylus Replacement U=user U Mounting S/P Weight 5.5 For Sale to US Customers Only .

Grado Prestige Red1 Phono Cartridge

Grado Prestige Silver1 Phono Cartridge

Grado PS-1000 Professional Headphones

Grado is proud to introduce the new flagship of their headphone line, the PS1000. This hybrid design has an inner sleeve of a selected species of hand-crafted mahogany made by using an intricate curing process. Its outer housing of metal machined from a special non-resonant, very hard metal alloy utilizes a special processing and casting method to increase the porosity of the alloy. This combination of wood and metal insures that the earphone chamber has no ringing which might obscure detail or add coloration. The way the wood and metal housing moves air and reacts to sound vibrations is now virtually unaffected by transient distortions. Grado has also designed a new cable for the PS1000. The new eight-conductor cable design, utilizing UHPLC (ultra-high purity, long crystal) copper, improves control and stability of the total range of the frequency spectrum. The PS1000 also utilizes a newly re-configured voice coil and diaphragm design, resulting in unsurpassed speed and accuracy response. The cushion design creates the correct balance between the driver and hybrid housing to give the resulting musicality desired. The cushion design also makes the PS1000 one of the most comfortable to wear headphones in the world. Grado has taken all their knowledge and years of experience in controlling resonances and eliminating distortions and this has culminated in the development of their finest headphone ever, the PS1000. Listen, enjoy and agree. Features: Vented diaphragm Hybrid air chamber UHPLC copper voice coil wire UHPLC copper connecting cord Tranducer type dynamic Operating principle open air Frequency response 5-50 SPL 1mW 98 Normal impedance 32ohms Driver matched db .05 For Sale to US Customers Only .

Grado RA-1 Headphone Amplifier - Battery

After years of relying on other equipment to drive Grado headphones, you can now listen and enjoy headphones through our new Grado Reference Headphone Amp, the RA1. Designed for state-of-the-art performance and specifically to play Grados, the new RA1 will allow you to hear your headphones like never before. This new amp is machined from a solid block of mahogany and measures 5 wide, 5 1/2 deep and 1 1/2 tall and weighs in at 12 oz. The RA1 is available in an AC version or can be powered by two 9-Volt batteries that will drive the amp for 40 to 50 hours of listening pleasure. And the sound? Just like all Grados: warm, smooth, full-bodied, non-fatiguing and rich. Hook it up to any line source (portable or in-home) and drive your Grado headphones to their full potential. Also available the RA1-HG (High Gain). Now headphone enthusiasts can utilize the RA1's sonic qualities with a wide selection of headphones. The RA1-HG is designed to drive headphones with impedances of 100 ohms or more. For Sale to US Customers Only

Grado Reference Master1 Phono Cartridge

Grado Reference Platinum1 Phono Cartridge

The newly redesigned Platinum1 and Sonata1 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. All this is hand-assembled within a machined, new processed, Australian Jarrah wood housing. The Platinum1 and Sonata1 models use a modified four piece OTL cantilever technology achieving a 10% tip mass reduction over the Prestige series and ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils. The Platinum model uses Grado's specially designed elliptical diamond mounted on a brass bushing, and the Sonata model uses Grado's specially designed nude elliptical diamond. Frequency Response 10-60 Principal MI Channel Separation at 1KHz 40 Imput Load 47K Output at 1KHz 5CM/sec. 5mV Recommended Tracking Force 1.5 Stylus Type E Inductance 45mH Resistance 475 Compliance CUs 20 Stylus Replacement F=Factory F Mounting S Weight 6.5 For Sale to US Customers Only .

Grado Reference Sonata1 Phono Cartridge

Grado RS-1i Headphones

What does the i stand for in the new RS1i from Grado? Improved, that’s what! Featuring a new species of handcrafted Mahogany earpieces made using an intricate curing process; Grado has been able to optimize the tonal quality. The RS1i uses new upgraded dynamic transducers and the new 8 conductor cable design all in an open-air configuration, the cups being open-backed. The result is a smooth, controlled and coherent sound with detailed dynamics. Frequency response ranges from 12-30 kHz and the drivers are matched to 0.05dB. Weighing 9oz, the headphones are an example of the wonder of Mother Nature with a gorgeous, dark-colored Mahogany look. The RS-1 is the Masterpiece of the Grado collection, the Top Of The Range product which oozes class both in looks and sound. Features: Vented diaphragm Wooden air chamber UHPLC copper voice coil wire UHPLC copper connecting cord Tranducer type dynamic Operating principle open air Frequency response 12-30 SPL 1mV 98 Normal impedance 32ohms Driver matched db .05 For Sale to US Customers Only .

Grado RS-2i Headphones

What does the i stand for in the new RS2i from Grado? Improved, that’s what! The RS2i is the little brother of the RS1i. The RS2i has an upgraded driver and the new 8 conductor cable design. The characteristics of the RS2i remain the same as its distinguished big brother, with the new species of hand crafted mahogany, but with a smaller wooden air chamber. Although a miniature version of the RS1i, the RS2i still maintains an overall sound that is pure Grado, warm harmonic color, full bodied vocals, excellent dynamics and ultra smooth top end. These truly are audiophiles dream. Features: Vented diaphragm Wooden air chamber UHPLC copper voice coil wire UHPLC copper connecting cord Tranducer type dynamic Operating principle open air Frequency response 14-28 SPL 1mV 98 Normal impedance 32ohms Driver matched db .05 For Sale to US Customers Only

Grado S-Cush Replacement Headphones Cushions

Designed to fit Grado Headphones S-Cush (fits SR60, SR80, SR125, SR60i, SR80i, SR125i) The S-Cush is the enclosed design. For open design, the L-Cush will also fit. Sold in pairs, priced per pair For Sale to US Customers Only .

Grado SR-125i Headphones

What does the i stand for in the new SR125i from Grado? Improved, that’s what! Grado's ability to combine lightness with extreme rigidity and internal damping has been put to good use on the SR125i. Based on the same design as theSR80i, the SR125i also features an improved driver and cable design utilizing UHPLC (Ultra-high purity, long crystal) copper voice coil wire. With the new 8 conductor cable design you will notice improved control and stability of the upper and lower range of the frequency spectrum, with both better supporting Grado’s world renowned midrange. The Diaphragms are put through a special de-stressing process in order to enhance inner detail. The way the SR125i’s new driver, cable and plastic housing move air and react to sound vibrations are now less affected by transient distortions. Bass, midrange and treble are all more open and you will enjoy the fine tonal spread and balance. Features: Vented diaphragm Non Resonant air chamber UHPLC copper voice coil wire Standard copper connecting cord Tranducer type dynamic Operating principle open air Frequency response 20-20 SPL 1mV 98 Normal impedance 32ohms Driver matched db .1 For Sale to US Customers Only .

Grado SR-225i Headphones

What does the i stand for in the new SR225i from Grado? Improved, that’s what! Features are the same as the SR125i, new driver, cable and housing designs, but this headphone has an increased rear air flow, utilizes Grado’s larger ear cushion and has closer matched drivers. Air flow is increased by 50% which is achieved through an improved rear metal screen. The use of closer matched drivers and the larger cushions results in an enlarged soundstage, while the improved rear screen frees the headphone from colorations. Features: Vented diaphragm Non Resonant air chamber UHPLC copper voice coil wire Standard copper connecting cord Tranducer type dynamic Operating principle open air Frequency response 20-22 SPL 1mV 98 Normal impedance 32ohms Driver matched db .05 For Sale to US Customers Only .

Grado SR-325is Headphones

What does the i stand for in the new SR325is from Grado? Improved, that’s what! Yes, Grado has taken one of the world’s most acclaimed headphones and taken it a few steps further. The new SR325is has an upgraded driver and cable design. The way the SR325is’ driver, cable and metal housing move air and react to sound vibrations are now less affected by transient distortions. With the new 8 conductor cable design you will notice improved control and stability of the upper and lower range of the frequency spectrum with both better supporting Grado’s world renowned midrange. The SR325is will produce a sound that is pure Grado, warm harmonic color, rich full bodied vocals, excellent dynamics and an ultra smooth top end. Listen and Enjoy! Features: Vented diaphragm Aluminum air chamber UHPLC copper voice coil wire UHPLC copper connecting cord Tranducer type dynamic Operating principle open air Frequency response 18-24 SPL 1mV 98 Normal impedance 32ohms Driver matched db .05 For Sale to US Customers Only .

Grado SR-60i Headphones

What does the i stand for in the new SR60i from Grado? Improved, that’s what! Yes, Grado has taken one of the world’s most legendary headphones and taken it a few steps further. The new SR60i has an upgraded driver design, and they have enlarged and improved the mass distribution in the plastic housing. The way the SR60i’s new driver and plastic housing move air and react to sound vibrations are now less affected by transient distortions. With the SR60i you will notice improved control of the upper and lower range of the frequency spectrum with both better supporting Grado’s world renowned midrange. And The SR60i will produce a sound that is pure Grado, warm harmonic color, rich full bodied vocals, excellent dynamics and an ultra smooth top end. Listen and Enjoy! Tranducer type dynamic Operating principle open air Frequency response 20-20 SPL 1mV 98 Normal impedance 32ohms Driver matched db .1 For Sale to US Customers Only .

Grado SR-80i Headphones

What does the i stand for in the new SR80i from Grado? Improved, that’s what! Built on the same features as theSR60i, but SR80i utilizes a 4 conductor connecting cable and the diaphragms are put through a special de-stressing process in order to enhance inner detail, the result of which gives a more open stage. The new SR80i has an upgraded driver design, and they have enlarged and improved the mass distribution in the plastic housing. The way the SR80i’s new driver and plastic housing move air and react to sound vibrations are now less affected by transient distortions. The SR80 provides an improved bass resonance, which enhances the overall detail. With the SR80i you will notice improved control of the upper and lower range of the frequency spectrum with both better supporting Grado’s world renowned midrange. The SR80i will produce a sound that is pure Grado, warm harmonic color, rich full bodied vocals, excellent dynamics and an ultra smooth top end. Listen and Enjoy! Features: Vented diaphragm Non Resonant air chamber Standard copper voice coil wire Standard copper connecting cord mini plug with 1/4 adaptor Tranducer type dynamic Operating principle open air Frequency response 20-20 SPL 1mV 98 Normal impedance 32ohms Driver matched db .1 For Sale to US Customers Only .

Grado Statement Master1 Phono Cartridge

The newly redesigned Master1 and Reference1 cartridges have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. All this is hand-assembled within a machined, new processed, Australian Jarrah wood housing. The Master1 and Reference1 models use a five piece OTL cantilever technology achieving an additional 5% tip mass reduction over the Platinum1 and Sonata1 models. The coils are wound with ultra-high purity long crystal (UHPLC) oxygen free copper wire. The Master1 model is mounted with Grado's specially designed nude elliptical diamond, and the Reference1 model uses Grado's true ellipsoid design diamond. Frequency Response 10-60 Principal MI Channel Separation at 1KHz 40 Imput Load 47K Output at 1KHz 5CM/sec. 0.5mV Recommended Tracking Force 1.5 Stylus Type E Inductance 2mH Resistance 2 Compliance CUs 20 Stylus Replacement F=Factory F Mounting S Weight 6.5 For Sale to US Customers Only .

Grado Statement Platinum1 Phono Cartridge

The newly redesigned Platinum1 and Sonata1 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. All this is hand-assembled within a machined, new processed, Australian Jarrah wood housing. The Platinum1 and Sonata1 models use a modified four piece OTL cantilever technology achieving a 10% tip mass reduction over the Prestige series and ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils. The Platinum model uses Grado's specially designed elliptical diamond mounted on a brass bushing, and the Sonata model uses Grado's specially designed nude elliptical diamond. Frequency Response 10-60 Principal MI Channel Separation at 1KHz 40 Imput Load 47K Output at 1KHz 5CM/sec. 0.5mV Recommended Tracking Force 1.5 Stylus Type E Inductance 2mH Resistance 2 Compliance CUs 20 Stylus Replacement F=Factory F Mounting S Weight 6.5 For Sale to US Customers Only .

Grado Statement Reference1 Phono Cartridge

The newly redesigned Master1 and Reference1 cartridges have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. All this is hand-assembled within a machined, new processed, Australian Jarrah wood housing. The Master1 and Reference1 models use a five piece OTL cantilever technology achieving an additional 5% tip mass reduction over the Platinum1 and Sonata1 models. The coils are wound with ultra-high purity long crystal (UHPLC) oxygen free copper wire. The Master1 model is mounted with Grado's specially designed nude elliptical diamond, and the Reference1 model uses Grado's true ellipsoid design diamond. Frequency Response 10-60 Principal MI Channel Separation at 1KHz 40 Imput Load 47K Output at 1KHz 5CM/sec. 0.5mV Recommended Tracking Force 1.5 Stylus Type E Inductance 2mH Resistance 2 Compliance CUs 20 Stylus Replacement F=Factory F Mounting S Weight 6.5 For Sale to US Customers Only .

Grado Statement Sonata1 Phono Cartridge

The newly redesigned Platinum1 and Sonata1 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. All this is hand-assembled within a machined, new processed, Australian Jarrah wood housing. The Platinum1 and Sonata1 models use a modified four piece OTL cantilever technology achieving a 10% tip mass reduction over the Prestige series and ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils. The Platinum model uses Grado's specially designed elliptical diamond mounted on a brass bushing, and the Sonata model uses Grado's specially designed nude elliptical diamond. Frequency Response 10-60 Principal MI Channel Separation at 1KHz 40 Imput Load 47K Output at 1KHz 5CM/sec. 0.5mV Recommended Tracking Force 1.5 Stylus Type E Inductance 2mH Resistance 2 Compliance CUs 20 Stylus Replacement F=Factory F Mounting S Weight 6.5 For Sale to US Customers Only .

Grado iGrado Headphones

Grado Labs is pleased to announce the introduction of our newest product, the iGrado street style headphone. Designed specifically for the portable Electronics > Audio market, it was our goal to design a street style headphone that will sonically outperform anything currently available in the low-end portable market. This we have accomplished. The new "iGrado" is functionally stylish, lightweight and comfortable.

Harmonic Technology Crystal Copper Phono Cables

Harmonic Technology's Crystal Copper Phono cable is a state-of-the-art, dedicated interconnect cable for use with the finest cartridges and turntables. It is considered a top-of-the-line reference phono interconnect that is able to transmit low signal levels with high resolution, without the loss of detail. Available with our RCA-RCA plugs only, it was designed to provide the highest level of transparency and harmonic richness possible from your analog system. Harmonic Technology has engineered the Crystal Copper Phono cable with our proprietary Twin-Shield design and quad conductors of Metal filaments. By utlizing two different shields (a braided our shield with grounding pigtails and one aluminized Mylar shield adjacent to the conductors), the noise floor if vastly improved. The quad conductors and two 6N Single Crystal copper helps improve bass impact and liquidity. The Crystal Copper Phono cable will transform the sound of your system and convey a complete sonic tapestry. It delivers a vast increase in clarity and transparency, combined with deeper, tighter bass and liquid highs. The harmonic richness in the vital midrange will sound as if you were at a live concert. Sold in pairs.

Harmonic Technology Crystal Silver Phono Cables

Harmonic Technology's Crystal Silver Phono cable is a state-of-the-art, dedicated interconnect cable for use with the finest cartridges and turntables. It is the best reference phono interconnect that is able to transmit low signal levels with high resolution, without the loss of detail. Available with either our RCA or five-pin DIN plugs, it was designed to provide the highest level of transparency and harmonic richness possible from your analog system. Harmonic Technology has engineered the Crystal Silver Phono cable with our proprietary Twin-Shield design and quad conductors of Bi-Metal filaments. By utlizing two different shields (a braided our shield with grounding pigtails and one aluminized Mylar shield adjacent to the conductors), the noise floor if vastly improved. The quad conductors and two 6N Single Crystal copper helps improve bass impact and liquidity, while two Single Crystal 7N silver enhances detail and air. The Crystal Silver Phono cable will transform the sound of your system and convey a complete sonic tapestry. It delivers a vast increase in clarity and transparency, combined with deeper, tighter bass and liquid highs. The harmonic richness in the vital midrange will sound as if you were at a live concert.

Harmonic Technology Crystal Silver S-Video Cables

Harmonic Technology's top-quality S-video cables use our Twin-Shield superior Silver or Copper filaments. A luxurious black rubberized jacket and our NASA-grade gold-plated four-pin plugs complete the package. These are the finest S-video cables in the world and are available in any custom length.

Harmonic Technology Digital Copper Digital Audio Cables

Harmonic Technology's Digital Copper, terminated in either single-ended RCA or BNC, is a 75-Ohm coaxial digital cable manufactured with our proprietary Single Crystal (OCC) copper of the highest laboratory grade 6N purity (99.9997%). The Digital Copper digital cable allows for the highest level of signal purity in a coaxial design - especially in the midrange and treble frequencies. Harmonic richness is greatly increased due to the elimination of crystal boundaries and impurities that can disrupt the integrity of the complex harmonic digital waveform. Using the world's best connectors and insulation materials, the Digital Copper is one of the most accurate and pleasing digital cables on the market. Digital Copper Technical Data Descriptions RCA/BNC Terminations Capacitance per foot 22 pF Inductance per foot 0.46 uH Resistance per foot 0.008 Ohm

Harmonic Technology Digital Platinum Digital Audio Cables

Harmonic Technology's Digital Platinum, terminated in either single-ended RCA or balanced XLR, is the finest digital cable ever designed. Through heroic engineering efforts in both materials and build quality, the Digital Platinum ensures professional quality and reliability for even the most sophisticated reviewers. Through the utilization of laboratory-grade pure Single Crystal silver that has been refined to 7N (99.99997%), the Digital Platinum cable was designed for use with critical digital applications where performance cannot be sacrificed. Our proprietary Twin-Shield noise reduction design uses two separate shields that operate at differential ground potentials to create the smoothest possible operation. A silver-plated copper braided shield, combined with an aluminum/Mylar foil, ensures the highest signal-to-noise ratio to protect the delicate digital data bit stream.

Harmonic Technology Digital Silver Digital Audio Cables

Harmonic Technology's Digital Sliver, terminated in either single-ended RCA or BNC, is a 75-Ohm coaxial digital cable manufactured with our proprietary Single Crystal (OCC) silver of the highest laboratory grade 7N purity (99.99997%). The Digital Silver digital cable allows for the highest level of signal purity in a coaxial design - especially in the midrange and treble frequencies. Harmonic richness is greatly increased due to the elimination of crystal boundaries and impurities that can disrupt the integrity of the complex harmonic digital waveform. Using the world's best connectors and insulation materials, the Digital Silver is one of the most accurate and pleasing digital cables on the market. Harmonic Technology's Digital Silver is a great choice in almost any high-end system where musicality is a must. Digital Silver Technical Data Descriptions RCA/BNC Terminations Capacitance per foot 16 pF Inductance per foot 0.51 uH Resistance per foot 0.015 Ohm

Harmonic Technology DVI-HDMI Cables

Harmonic Technology's new HT DVI-HDMI video cable has been specially designed for home theater enthusiasts who desire the extraordinary high resolution picture and surround sound from their high-end components and high definition televisions. Constructed with high purity Silver over high purity Copper, the HT DVI-HDMI (DVI or DVI ) video cable delivers HDMI's digital signals at the highest data transfer rates available at optimized speed and with razor-sharp detail and crystal-clear audio. It is literally a home theater enthusiast's dream come true.

Harmonic Technology Fantasy AC10 Power Cables

Since the clarity of an audio or video signal can be greatly affected by the component's power supply, it makes perfect engineering sense to provide your power supply with electricity which has been conditioned by Single Crystal purity. Harmonic Technology's Fantasy AC-10 achieves the highest level of clarity by using only the finest 6N (99.9997%) high purity copper and by adapting more advanced Balanced Field Geometry cable design. Having a total gauge of 10, the Fantasy AC10 has more Single Crystal copper than all other power cords on the market. In addition, each individual conductor of the Fantasy AC-10 is insulated with formed polyethylene (PE) to reduce strand interactions. With more insulation than any other power cord available, the Fantasy AC-10 further eliminates and rejects RFI. Constructed using both a foil shield and a separate braided shield to drain away any unwanted electrical interference with the Fantasy AC-10, the component is now free of any electrical disturbance, including collision with crystalline barriers and impurities. The power supply of the component can now allow the audio or video signal to be processed without additional distortion. Terminated with IEC connectors

Harmonic Technology Fantasy SE Speaker Cables

Harmonic Technology's newly released Fantasy Speaker Cable helps your system provide outstanding clarity in high frequencies, midrange and tight natural bass. It has exceptional dynamic contracts that allow for a deep and wide soundstage - even with the largest speaker systems. Harmonic Technology's Fantasy Speaker Cable uses our proprietary Single Crystal copper in an 11 gauge cable to transmit an extremely accurate sound. Each group of conductors is insulated with foamed PE (polyethylene) and PP to reduce strand interaction while greatly increasing signal-to-noise ration and dynamic range. Fantasy Speaker Cable Technical Data Descriptions Mono-Wire Bi-Wire AWG conductors 1 13-AWG and 1 15-AWG 2 13-AWG (for bass) and 2 15-AWG (for midrange and tweeter) Connections Spade, locking banana, regular banana n/a Color Black or Off-White Other colors at additional cost Black or Off-White Other colors at additional cost Sold in pairs.

Harmonic Technology Harmony Optical One Digital Audio Cables

Harmonic Technology's Harmony Optical One Toslink cable is a fiber glass optic digital audio cable that carries digital audio data in the form of light pulses rather than using electricity. The Harmony Optical One Toslink cable is capable of eliminating distortions caused by imperfections of inductance, capacitance and resistance in coaxial digital cable. Toslink cables can also eliminate EMI and RFI interference Our fiber glass optical cable is designed to provide outstanding low-loss, low-jitter performance while overcoming the usual limitations of cheaper fiber-optic cables. In addition, we have improved the cable's durability and strength, and use connectors that ensure a tight connection every time.

Harmonic Technology Harmony Rainbow Multi-Channel Cables

Harmonic Technology's Harmony Rainbow multi-channel cable is designed for home theater processors and multi-channel DVD and CD players. Harmony Rainbow consists of up to six individual cables combined in one housing; thus, it replaces three pairs of digital interconnects (six in combination of either video or audio digital cables). Harmony Rainbow can be terminated in RCA or BNC connectors. Harmony Rainbow is made using high purity silver coated (OFC) copper.

Harmonic Technology Harmony Wave Speaker Cables

Harmonic Technology's Harmony Wave speaker cable utilizes our proprietary Single Crystal copper wire. But with a unique exterior design constructed of UL/CL-3 grade PVC, the Harmony Wave accommodates for in-wall applications. It can be terminated with spades or regular banana plugs. Harmony Wave Technical Data Descriptions Capacitance per foot 37 pF Inductance per foot 0.56 uH Resistance per foot 0.003 Ohm Sold in pairs.

Harmonic Technology Harmony-Link Audio Interconnect Cables

Available in both a single-ended RCA connection and a balanced XLR configuration, was designed to break all expectations regarding the price of an interconnect cable versus its performance. Harmony-Link utilizes our world-renowned (OCC) Single Crystal copper (99.9997%) conductors at a price that makes affordable for any system. Harmony-Link Technical Data Descriptions RCA Terminations XLR Terminations Capacitance per foot 62 pF 60 pF Inductance per foot 0.52 uH 0.49 uH Resistance per foot 0.013 Ohm 0.011 Ohm

Harmonic Technology HT Subwoofer Cable

Harmonic Technology HT Subwoofer cable, which is available in both a single-ended RCA connection and a balanced XLR configuration, is the most cost-effective approach for those who want the best performance at the best value available in an interconnect cable. It utlizes our world-renowned (OCC) Single Crystal copper (99.9997%) conductors and the finest air-foamed PE (polyethylene - air bubbles that are used as the main dielectric insulation) to provide the finest interconnect cable available at an extremely low price point. The HT Subwoofer's superior design and high quality materials provides exceptional clarity and tonal balance. HT Subwoofer Technical Data Descriptions RCA Terminations XLR Terminations Capacitance per foot 58 pF 58 pF Inductance per foot 0.48 uH 0.46 uH Resistance per foot 0.012 Ohm 0.009 Ohm

Harmonic Technology HT-HDMI Ver. 1.4a Cables

Harmonic Technology HDMI (High Definition Multimedia Interface) V 1.4A cable for audio and video connections is suited for High Speed, 3D and Ethernet capabilities.

Harmonic Technology Magic HDMI Audio Cable

Ever wanted to have an HDMI cable just for your audio needs? Harmonic Technology is proud to introduce the Magic Audio (only) OFC HDMI cable that has been designed for your optimal audio transmissions - such as between PS Audio Wave transports and the PS Audio Wave DAC.

Harmonic Technology IEC to C7 Power Adapters

Harmonic Technology's DVD AC Adapter, introduced at CES 2001, allows you to use our high quality Pro AC-11 with ANY electronic component that uses a simple, inexpensive molded two-prong plug in cord. This is a high-quality molded adaptor that utilizes our world famous Single Crystal Copper in a user-upgradeable adapter. One end is a very high-quality molded two-prong plug for interfacing with your Electronics > Audio, the other is a male IEC socket. Switching from the supplied $3.00 cord that comes with most of today's DVD players to a high quality power cable like our Pro AC-11 will let you release the most from any DVD player, or other electronic component using such a inexpensive cord. Users notice brighter, more vibrant colors, better saturation, increased resolution, better depth-of-field, greater dimensionality, darker blacks and whiter whites on video signals. Audio performance is also significantly increased, with more accurate timbre, deeper and wider sound-staging, sharper focus of images, much better low bass performance and more airy, delicate high frequencies. .

Harmonic Technology i-Pure Power Supply

Harmonic Technology new i-Pure DC Power Supply replaces conventional batteries with a new purified DC power source. The i-Pure Power Supply, exclusively designed for our Photon cables, isolates the audio signals from RFI and EMI, as well as any crosstalk among electrical components.

Harmonic Technology Jumper Speaker Cables

Harmonic Technology's Jumper cables are designed to coordinate with your home theater systems for optimal performance, along with a variety of other jumper cables including the MAGIC and Pro-9 or Pro-11 Plus jumper cables.

Harmonic Technology Magic Digital Two Digital Cables

Harmonic Technology's MAGIC Digital Two, terminated in either single-ended RCA or balanced XLR, helps you fully recreate the magic of a recorded event in your home environment. Harmonic Technology's design team has spent a substantial amount of time and effort to research the most effective and innovative science and manufacturing process for the audio and video cable market. The culmination of this endless research has led to the introduction of Harmonic Technology's MAGIC Digital Two - a reference model digital cable that delivers the highest level of system performance available. MAGIC Digital Two will unleash all the magic within your entertainment system and allow it to perform at its fullest, and previously unattainable, potential. MAGIC Digital Two Technical Data Descriptions RCA Terminations XLR Terminations Capacitance per foot 34 pF 36 pF Inductance per foot 0.36 uH 0.42 uH Resistance per foot 0.004 Ohm 0.003 Ohm

Harmonic Technology Magic Link Two Audio Interconnect Cables

Harmonic Technology's new MAGIC Link Two, Furutech Rhodium-coated PC-OCC RCA or balanced XLR, is the newly improved interconnect to help you fully recreate the magic of a recorded event in your home environment. Made of low molecular, high purity copper and silver, and terminated in excellent RCA connectors made by Furutech exclusively for HT, The MagicLinkTwo is flexible, musical, very open sounding and almost grainless. Harmonic Technology's design team has spent a substantial amount of time and effort to research the most effective and innovative science and manufacturing process for the audio and video cable market. The culmination of this endless research has led to the introduction of Harmonic Technology's MAGIC Link Two - a truly reference model interconnect that delivers the highest level of system performance available. MAGIC Link Two will unleash all the magic within your entertainment system and allow it to perform at its fullest, and previously unattainable, potential. Through the utilization of a unique blend of the finest 7N (99.99997%) high purity OCC silver and 6N (99.9997%) OCC copper conductors, MAGIC Link Two represents the finest in signal transfer between your audio and video components. With more multi-gauge, individually insulated conductors within its uncompromised construction, MAGIC Link Two also implements an unparalleled bi-metal blend of Harmonic Technology's world-renowned pure OCC Single Crystal(TM) silver and copper conductors, which create an interconnect with an unsurpassed balance of transparency, detail and harmonic balance. Sold in pairs.

Harmonic Technology Magic Phono Cables

Harmonic Technology MAGIC Phono cable is a specifically customized RCA-to-RCA connection cable for use with their Magic Link Cable. Through the utilization of a unique blend of the finest 7N (99.99997%) high purity OCC silver and 6N (99.9997%) OCC copper conductors, MAGIC phono represents the finest in signal transfer between your audio components. Sold in pairs. .

Harmonic Technology Magic Reference II SE Power Cables

The Magic Reference II Special Edition Power cord is unique by filtering both high/low frequency noises as well as noises in the middle frequency range without any interference from the most desired levels of power. The PureAC module also filters the most undesirable DC component interference (that may occur) in an AC source. The final touch added to the Magic Reference II Special Edition Power cord is its ability to distinguish and filter all low amplitude noise to deliver the most uncolored and articulate power cord available. Specifications Conductors: Total of 10 AWG Material: Single Crystal OCC Copper Power cord UL/CL3 and Ethylene Propylene (PE) insulation Power Rating: Used for AC sources between 100 to 240 V Connectors: IEC 15 or 20 AMP, Wall plug US/UK/EU Damage threshold: maximum of 2400 W of peak power or peak current of 20 A at 110V or 10 A at 220V Constant load: maximum of 800 W Limitation: Not to be used with multiple components or a power distribution IEC Termination

Harmonic Technology Photon Link Audio Interconnect Cables

Photon AMP Interconnect Cable The second generation of the CyberLight P2A Photon Transducer Interconnect that is optimized for Preamp-to-Amplifier connections (recommended input: 1.25 Vrms) Key Features: Patent-pending LAM ensures music is never digitized and offers the lowest possible noise floor Fiber-optic technology ensures entire signal path is purely analog, without any sampling Photon light signals make it immune to EMI and RFI interference No DC measurement at the receiving termination (The Photon AMP interconnect has added logic to prevent any possible DC leak to the destination device, such as an amplifier) The new generation, the Photon AMP interconnect, has a broader frequency response range and provides even better sound quality and detail presentation Better measurement data than the CyberLight P2A Musical information is preserved to a greater degree because no digitalization is used No sampling or mathematical algorithms problems exist-providing even greater depth, airiness and soundstage than any digitized transport can maintain With the signal path being unidirectional, the signal ground loop is completely isolated, creating a much darker background Better preservation of natural harmonics, resulting in the ultimate three-dimensional acoustics, with flat frequency response up to 40 MHz Easy component impedance match so components can perform at its designed peak The bass is the tightest, deepest, AND most articulate, with no bloat-just rich tones and superb definition Highs are crystalline, precise and all musical passages are unraveled with ease One-year warantee Revolutionary Fiber Optic Interconnect Cable As two-channel and multi-channel music, and even surround systems, reach ever greater resolutions, selecting the best interconnects to bring each component together into perfect harmony has become one of the most crucial and complex decisions. For the truly discriminating, the choice is fiber-optically clear: Blue-jacketed Photon AMP analog interconnects. By adapting glass fiber and laser-like technology to the audio realm, Harmonic Technology has created a new generation of interconnects to bring the ultimate level of performance to audiophiles. Through patent-pending, miniaturized LAM (Light Analog Module) Photon Transducers, the Photon AMP converts audio signals to light pulses, with absolutely no digital conversions, to unleash the sonic depth, accuracy and power of every signal. The entire signal path remains purely analog without any sampling to capture amazing clarity. The photon density modulated optical information travels at the speed of light to eliminate any capacitance, inductances, skin effects, phase shifts and signal loss up to 200m. The result is a seductively quiet background, luscious harmonics and a transparent three-dimensional soundstage. Ground-Breaking Technology Figuratively and literally speaking, Photon technology is truly ground-breaking. The photon density modulated light signal actually does break the ground between components yielding a signal largely (or completely with the Photon Battery Power Pack) unaffected by humming noise along the ground plane. With the signal path completely isolated from the ground, the Photon AMP ensures that there is no possibility of the cables passing noise between components, nor acting as an antenna for RFI or EMI induced distortions, which keeps the noise floor extremely low and reduces smearing. Please note: Because there are no physical wires built within the Photon AMP, an extra ground wire may be needed in order to ensure components are on the same ground level. Sold in pairs.

Harmonic Technology Photon Link Digital Audio Cables

Key Features: Patent-pending LAM ensures digital signals remain in their original format No extra digitization to offer the lowest possible noise floor Inter-component ground-lift to eliminate radiated high frequency noise Photo light signals make it immune to EMI and RFI interference Full band-width frequency (between 5Hz to 30MHz) for superb depth and wide dynamic range Tight control over impedance - 75 ohms for coaxial cables and 100 ohms for AES/EBU Ground-Breaking Technology Figuratively and literally speaking, CyberLight technology is truly ground-breaking. The photon density modulated light signal actually does break the ground between components yielding a signal largely (or completely with the CyberLight Power Pack) unaffected by humming noise along the ground plane. With the signal path completely isolated from the ground, the CyberLight Digital Datalink ensures that there is no possibility of the cables passing noise between components, nor acting as an antenna for RFI or EMI induced distortions, which keeps the noise floor extremely low and reduces smearing. The Cyberlight Photon Transducer Digital Datalinks are truly an indispensable component for any home theater system. Please note: Because there are no physical wires built within the CyberLight Digital Datalink, an extra ground wire may be needed in order to ensure components are on the same ground level.

Harmonic Technology Pro-10 Reference Speaker Cables

Pro-10 Reference Speaker Cable: After successful launched the Pro-9 Reference SE 2009 version, we have released this Pro-10 Speaker Cable. If your speakers cannot be bi-wired, this is one of the best Speaker cables which have all the benefits of the Pro-9 Reference with one less gauge Only 10 gauge. Sold in pairs.

Harmonic Technology Pro-11 Reference Speaker Cables

The Pro-11 Reference Speaker cable is a major Improvement from the Pro-11 Plus Speaker cable. It still 11 AWG 99.99997 percent Single Crystal OCC Copper wires with similar structure of the Pro-10 Speaker cable with PTFE tapes wrapped around PE, PP and PVC insulation. Sold in pairs.

Harmonic Technology Pro 11 Plus Speaker Cables

Harmonic Technology's Pro-11 Plus speaker cable is an 11 AWG internal mono-wire single crystal cable. The Pro-11 Plus has won the Golden Ear Award from Absolute Sound and is also listed in Stereophile's Guide To Recommended Components. A two-conductor version of Pro-9 Plus, the Pro-11 Plus accommodates systems where the speakers cannot be bi-wired. The Pro-11 Plus contains a one-inch diameter outer construction using 19 strands of individually insulated 24 gauge copper filaments, resulting in a total of 11 gauge per conductor path. This design optimizes the ratio between surface area and core size, greatly reducing the skin effect for high frequency detail and smoothness. Our Single Crystal construction and exceptionally high purity 6N copper allow this cable to make your system sound closer to live music. Sold in pairs.

Harmonic Technology Pro 9 Reference Speaker Cables

Harmonic Technology's Pro-9 Reference (available as a mono speaker wire, internal bi-wire or external bi-wire) is an improvement of our award-winning Pro-9 Plus speaker cable. In a variety of lengths and terminations, the Pro-9 Reference will accommodate any of your speaker cable needs. The Pro-9 Reference is our finest copper speaker cable. It uses the highest quality materials and our unique Balanced Field Geometry to ensure the best signal transfer and greatly reduces inductance and capacitance for extremely accurate sound. Manufactured with 9 AWG wire that consists of the highest purity 6N copper available (99.9997%) and our world-renowned Single Crystal design, this speaker cable virtually eliminates all distortion and coloration. In addition, the Pro-9 Reference uses air-tube technology to separate the conductors within the cable to dispense with any potential cross-talk. Harmonic Technology's Pro-9 Reference is the best speaker cable available for large speakers and/or exceptionally powerful amplifiers. The Pro-9 Reference allows the bass to be very tight, yet extremely dynamic. The midrange is exceptionally rich, with tremendous detail and harmonic completeness that borders on realism. The highs are very smooth and detailed, without the artificial zing that you may have experienced with other speaker cables. Harmonic Technology has delivered a speaker cable that allows the soundstage to bloom as large as your room-a holographic depth and roundness you simply must experience. The Pro-9 Reference will easily outperform your existing speaker cables and transform the very sound of your system. Sold in pairs.

Harmonic Technology Pro-AC11 Power Cables

Harmonic Technology Pro AC-11 power cord is constructed with the finest high purity copper. Two shields of UL/CL-3 are used for superior RFI rejection and fire protection. They are available with a variety of IEC female and male plugs. Kalman Rubinson recommended this power cord in Stereophile's November 2000 issue. Using the finest 6N (99.9997%) high purity copper in the world, combined with our patented Single Crystal design, the Pro AC-11 will make an astonishing difference in your system. Using the same technology for our Pro-11 Plus speaker cable, two additional shields are added for rejection of RFI, digital, and other electromagnetic pollution. Since the purity of the musical or video signal can be greatly affected by the component’s power supply, it makes perfect engineering sense to provide your power supply with electricity which has been conditioned by the Single Crystal purity of the Pro AC-11. This power cord eliminates and rejects RFI due to shielded construction, using both a foil shield and a separate braided shield to drain away any unwanted electrical interference. Since the electricity fed to the component is now free of electrical disturbance, including collision with crystalline barriers and impurities, the power supply of the component can now allow the musical or video signal to be processed without additional distortion being added. IEC Termination

Harmonic Technology Silver Component Plus Video Cables

Harmonic Technology's Silver Component Plus, available in an RCA connection, or an optional BNC and 90 degree alternative terminal, is a significant upgrade to our Crystal Component cable. It consists of a set of three 75-ohm coaxial cables (red, green and blue) to provide superior video resolution. Harmonic Technology's Silver Component Plus cable significantly improves the depth of field, color balance, and transparency of the video signal.

Harmonic Technology Truth-Link Audio Interconnect Cables

Harmonic Technology's Truth-Link highest purity 6N copper interconnect cable, which is available in both a single-ended RCA connection and a balanced XLR configuration, utilizes our unique (OCC) Single Crystal copper (99.9997%) conductors to provide the finest copper interconnect cable available. Our research in Balanced Field Geometry and the use of the best insulation available allows Harmonic Technology's Truth-Link interconnects to open up the sound field of your system like you ave never experienced before. Truth-Link Technical Data Descriptions RCA Terminations XLR Terminations Capacitance per foot 50 pF 47 pF Inductance per foot 0.42 uH 0.50 uH Resistance per foot 0.008 Ohm 0.009 Ohm Sold in pairs.

Jaton AV-RC2000 Stereo Pre-Amplifier

The RC2000S/P pre-amplifier is the result of Jaton’s commitment to its belief that high quality products don’t need to come at a high tag. Nevertheless, the constant search and implementation of high quality components - One of Jaton’s lifetime obsessions - was not omitted here. Wima and Mundorf capacitors are the backbone of the RC2000 series insuring the stability, sound stage, accuracy and most importantly the Excellency required by the most demanding ears. Its bi-wire outputs are the perfect match for our Operetta modular design amplifier. Instead of two, have four modules installed in your amplifier and new life, texture as well as a more complete sound state will flow out of your system. Also, do not forget to add a pair of our bi-wire Lyra or Real speakers and you will experience the unique listening experience that Jaton has to offer. Model RC2000P(Analog Only) RC2000S(DigitalandLFE Out) Distribute Channel 2 Channel 2.1 Channel THD + N % < 0.01% @ 8 Ohm, 1 kHz, 70 Watts Signal to Noise Ratios 105 dB Frequency Response 5 Hz ~ 50 kHz Volume Range -85 dB ~ + 5 dB Input Impedance(XLR) 20 k Ohm Input Impedance(RCA) 100 k Ohm Input Connection 1 Pair of XLR/RCA Analog 3 Pairs of RCA Analog 1 Pair of XLR/RCA Analog 2 Pairs of RCA Analog 1 of Optical Digital 1 of Coaxial Digital Output Connection Output# 1 XLR/RCA Output# 2 Bi-Amp RCA Output# 1 XLR/RCA Output# 2 Bi-Amp RCA and LFE Output Dimensions 17.0 (W) x 7.5 (H) x 14.5 (D) Weight 18 LBS 19 LBS .

Jaton Lyra AV-HD661-DX Speakers - Pair

Apart from the piano gloss surface finish of the HB model, the surface of HD-661MB is finished in 9 layer flat black lacquer that offers the uniqueness with the curving sound box (The DX version is finished in 11 layer flat black lacquer). A combination of scale and finesse our Lyra HD-661 offers is simply magnificent. Reassuringly at ease with either the adrenaline surges of a rock concert or the harmony of a string quartet, HD-661 simply has the power to communicate. Spatial sound elements materialize in front of you, as every high frequency nuance is faithfully rendered by the centrally located speaker. It's plain to see that the HD-661MB is a star performer the moment it makes its entrance. Along with the unique stances specially designed to accompany all HD-661 models, you will soon discover that the captivating elegance comes from both their sound and their beauty. Driver Unit Passive Type, 2 Way 3 Drivers S.P.Level 90dB / W / M Effective Frequency 50 Hz ~ 25K Hz Maximum Power 60W / 250W Maximum Nominal Impedance 4 Ohm Driver Unit Size 1 x 1 Unit, 6.5 x 2 Units 24 W x 27 H x 13 D Shipping weight: 44 lbs. Sold in pairs .

Jaton Operetta AV-AP2140A Stereo Amplifier

Limited Time - Factory Direct Pricing The Operetta AP2140A Stereo Amplifier features 70 watts x 2 channels into 8 Ohms and 140 watts x 2 channels into 4 Ohms. THD + N: >0.01% @ Ohms, 1 kHz, 70 Watts Freq. Response: 16 Hz - 40 kHz, +/- 0.1 dB Max. Output Level: 23 Vrms Input Sensitivity: 84 mVrms @ 1 W Output Dynamic Range: 150 dB Max. Gain: 30 dB Max. Power Consumption: 950 Watts Input Impedance: 55 kOhms Input Connection: 2 x unbalanced gold RCA Output Impedance: 4, 6, or 8 Ohms Output Connection: 2 x pairs 5-way binding posts Dimensions: 17 W x 7.5 H x 14.5 D Weight: 47 lbs.

Jaton Operetta AV-AP2300AX Stereo Amplifiers

Through the centuries, great music and great musical performances have come from unexpected places as different as the refined concert halls of Vienna, the backwoods cabins of Appalachia and the gritty alleys of New Orleans. Great music doesn t come from technology, privilege or status. Great music comes from the heart. This, above all, is the driving idea at the heart of our new Operetta A2300 power amplifier. Rated at a full 300 watts per channel of Class A power, it is indeed driving, delivering the finesse and control that music demands, but this is not just about power. It's about music. Like a great musical instrument, it soars above the cacophony of glitz, glitter and hype of our gadget-choked world. Rather, Jaton has wisely chosen to impeccably execute an elegant design that is homage to first principals. You only need to hear it once to understand Jaton has vaporized all barriers between you and musical performance. You hear the weeping deep in the Stradivarian wood of the first violin, just as Beethoven himself heard it in his mind's ear. Even a humble backing bass solo in a jazz quartet suddenly transcends to prove there is genius in a three-note phrase. Rise above the noise to hear what we re hearing. Transcend with the genius of Jaton. Max. Output Power 300 Watts @ 4 Ohm, 150 Watts @ 8 Ohm Distribute Channel 2 Channel THD + N < 0.01% @ 8 Ohm, 1 kHz, 150 Watts Frequency Response 16 Hz ~ 40 kHz, +/- 3 dB Max. Output Level 49 Vrms Max. Gain 30 dB Max. Power Consumption 1650 VA Input Impedance 55k Ohm Input Connection 2 of Unbalanced gold plated RCA 2 of XLR Balanced ( AP2300AX Only ) Output Impedance 4, 6, 8, 16 Ohm Output Connection 2 Pairs of 5 Way Binding Posts Dimension 17 (W) x 14.5 (D) x 7.5 (H) Weight 80 LBS

Jaton Operetta AV-AP5140A 5-Channel Amplifier

Limited Time - Factory Direct Pricing The Operetta AP5140A 5-Channel Amplifier features 70 watts x 5 channels into 8 Ohms and 140 watts x 5 channels into 4 Ohms. THD + N: >0.01% @ Ohms, 1 kHz, 70 Watts Freq. Response: 16 Hz - 40 kHz, +/- 0.1 dB Max. Output Level: 23 Vrms Input Sensitivity: 84 mVrms @ 1 W Output Dynamic Range: 150 dB Max. Gain: 30 dB Max. Power Consumption: 1900 Watts Input Impedance: 55 kOhms Input Connection: 5 x unbalanced gold RCA Output Impedance: 4, 6, or 8 Ohms Output Connection: 5 x pairs 5-way binding posts Dimensions: 17 W x 7.5 H x 14.5 D Weight: 55 lbs.

Jaton Operetta CD1000 CD Player

The Jaton CD1000A is the top of line model which use Mundorf Gold supreme caps on all the major analog signal paths. It is the designer collective choice. And superior convert the digital and solid into the analog and tube world.

Jaton REAL A3 Tower Speakers - Pair

The Jaton REAL A3 is a three-way floor-stander loudspeaker with German-made 10 inch subwoofer, 5 inch mid-range woofer, and Mundorf ribbon tweeter drivers.

Jaton REAL AV-803S Tower Speakers - Pair

Crossover 3 Way - 4 Drivers S.P.Level 91 dB / W / M Frequency Response 35 Hz ~ 40 KHz Handling Power 70W /300W Maximum Input Connection Single / Bi-Wire Connection Input Impedance 4 Ohm @ Single Amplification 8 Ohm @ Bi-Amplification Driver Unit Size 1 x 4 Semi Horn Loaded Ribbon Tweeter 1 x 5 Midrange-Woofer 2 x 8 Sub-Woofer Finishing Real Wood with Ultra High Gloss Lacquer AandV-803-1 Mahogany AandV-803-2 Sandalwood AandV-803-3 Walnut AandV-803-4 Dark Walnut Dimension 45 Tall with Base Stand x 10 (W) x 14.5 (D) Base Stand - 4 Tall x 15.75 (W) x 14.5 (D) Weight 110 LBS ea. Read a Review Real wood speaker cabinets Sold in pairs .

Kanto iPair 5 v2 Powered iPod Speakers - Pair

Providing unsurpassed audio quanlity through studio monitor inspired speakers, the Kanto iPair 5 v2 delivers crisp highs and deep bass from a small package. Let these speakers fill your room to its acoustic capacity. With unmatched features, performance and value the iPair 5 is sure to please and surprise even the most discerning ear. Available in a wide array of traditional and unconventional colors to match and decor and personal taste. Audio and Data Inputs Left and right line-in RCA 3.5mm Auxiliary mini-audio jack USB Port - Synchronize your iPod with your PC Outputs AC power outlet - Connect Apple's Airport Express S-Video output - View iPod video and movies on your TV IR Wireless Remote Control Credit card style remote Controls all iPod click wheel functionality Volume and mute Input mode select: iPod, RCA or Aux (3.5mm mini-audio jack) Instant repeat and shuffle mode Rear Panel Controls Master volume Input mode select Drivers Low-range driver: 5 1/4 magnetically shielded cone High-range driver: 1 magnetically shielded cone Input impedance: 10K ohms unbalanced Audio Specifications Total 80 Watts thru Built-In Amplifier Frequency response: 45Hz - 20 kHz S/N Ratio: >90dB (typical, A-weighted) 50 W bi-amp dynamic power Built-in subwoofer ports Power Requirements 100-120 V AC / 60 Hz and 220-240 V AC / 50 Hz Selectable Size and Weight 27 cm H x 18.5 cm W x 20 cm D 10.6 H x 7.3 W x 7.9 D 10.5 kg 23.1 lbs Available in your choice of 3 colors .

Kanto SYD4 Powered iPod Speaker System

Designed with the audiophile in mind, the Kanto Syd4, formerly iPort 4, powered speaker system offers a wide dynamic range that delivers premium sound the way music was meant to be heard. Deep bass comes from the enclosed 4 x 6 sub woofer, while two 3.0 high-range drivers provide unsurpassed clarity for the highs. With its opulent high gloss piano finish, in a choice of colors to suit any taste, the iPort 4 is a welcome complement to both contemporary and traditional settings. Audio and Data Inputs Left and right line-in RCA 3.5mm Auxiliary mini-audio jack USB Port - Synchronize your iPod with your PC IR Wireless Remote Control Credit card style remote Controls all iPod click wheel functionality Volume and mute Input mode select: iPod, RCA or Aux (3.5mm mini-audio jack) Instant repeat and shuffle mode Rear Panel Controls Master volume Input mode select Drivers Low-range driver: 4 x 6 magnetically shielded cone High-range driver: 2 x 3 magnetically shielded cone Input impedance: 10K ohms unbalanced Audio Specifications Total 40 Watts thru Built-In Amplifier Frequency response: 45Hz - 20 kHz S/N Ratio: >90dB (typical, A-weighted) Wide-range drivers: 2 x 10 watts RMS 8 ohms @ 1% THD+N Subwoofer: 15 watts RMS 8 ohms @ 1% THD+N 40 real watts of power Power Requirements 100-120 V AC / 60 Hz and 220-240 V AC / 50 Hz Selectable Dimensions: 5 H x 18.5 W x 6.5 D Available in your choice of 2 colors .

Kanto SYD5 Powered iPod Speaker System

Designed with the audiophile in mind, the Kanto Syd5, formerly iPort 5 v2, powered speaker system offers a wide dynamic range that delivers premium sound the way music was meant to be heard. Deep bass comes from the two enclosed 5.25 woofers, while two 3.0 high-range drivers provide unsurpassed clarity for the highs. With its opulent high gloss piano finish, in a range of colors to suit any taste, the iPort 5 is a welcome complement to both contemporary and traditional settings. Audio and Data Inputs Left and right line-in RCA 3.5mm Auxiliary mini-audio jack USB Port - Synchronize your iPod with your PC Outputs AC power outlet - Connect Apple's Airport Express S-Video output - View iPod video and movies on your TV IR Wireless Remote Control Credit card style remote Controls all iPod click wheel functionality Volume and mute Input mode select: iPod, RCA or Aux (3.5mm mini-audio jack) Instant repeat and shuffle mode Rear Panel Controls Master volume Input mode select Drivers Low-range driver: 5.25 magnetically shielded cone High-range driver: 3 magnetically shielded cone Input impedance: 10K ohms unbalanced Audio Specifications Total 80 Watts thru Built-In Amplifier Frequency response: 45Hz - 20 kHz S/N Ratio: >90dB (typical, A-weighted) 80 real watts of power Low-driver: 40 watts RMS 8 ohms @ 1% THD + N Full-rande driver: 2 x 20 watts RMS 8 ohms @ 1% THD + Na Built-in subwoofer ports Power Requirements 100-120 V AC / 60 Hz and 220-240 V AC / 50 Hz Selectable Size and Weight 18.5 cm H x 56 cm W x 20 cm D 7.3 H x 22 W x 7.9 D 10 kg 22 lbs Available in your choice of 3 colors .

Kanto Zed Powered iPod Speaker System

Style and function combine in this hand-crafted wood cabinet iPod speaker. The powered speaker system features multiple audio inputs and a full-function remote control. The ZED delivers refined sound and a surprising punch that adds a sophisticated presence to any room. Another great Kanto product for discerning listeners demanding a break from mediocrity. iPod Universal Dock Power button and indicator light Volume Up and Down buttons Audio Inputs Left and right line-in RCA 3.5mm (1/8 ) Auxiliary mini-audio jack iPod Dock Outputs Subwoofer line output IR Wireless Remote Control Functions (21 functions) Controls iPod click wheel functionality Power,Volume, treble, bass and mute Input mode select: iPod, RCA or Auxiliary (3.5mm mini-audio jack) Instant repeat and shuffle mode Rear Panel Controls Master volume Input mode select Drivers Two 3 Magnetically Shielded Paper Cone Input impedance: 10K ohms unbalanced Audio Specifications Frequency Response: 80Hz-20KHz >100dB (typical, A-weighted) Dynamic Power: 2 x 15watts RMS 4 Ohm @1% THD+N Bass reflex port enhances bass response Size and Weight Height: 14.2 cm (5.5 ) Width: 28.5 cm (11.2 ) Depth: 14.2 cm (5.5 ) Net Weight: 2.75 kg (6 lbs) Power> DC 24V at 1500mA Color Dark Chocolate - oak finish .

Luminous Audio Technology Allegro Digital Cable

Allegro Digital Cable uses a solid 14 gauge OFHC conductor sheathed in a foamed PTFE dielectric and 100% shielded with both foil and copper braid. Terminations are Cardas Gold RCA or MIL-SPEC BNC. With its coaxial geometry, quality materials and unsurpassed integrity, the Allegro Digital Cable is a state of technology 75 Ohm digital cable. The Allegro is also available in the AES/EBU pure silver balanced format. .

Luminous Audio Technology Allegro Signature Digital Cable

Luminous Audio Technology Allegro Signature Digital Cables XLR version available - 99.997% pure silver - Swiss made Neutrik XLR

LAT Mega Power Lynx Power Cable

THE MEGA POWER LYNX is an extremely high quality, 9 gauge composite, 99.7% OFC, stranded copper power cable. It is designed to maximize the transfer of A/C power to all of your high end components.

Luminous Audio Technology Monarch II Audio Cables - Pair

MONARCH II is very high quality 21-gauge, silver-plated solid-core, 99.997% (4/9s) OFC copper, with mil-spec PTFE insulation. The proprietary twin-axial conductor design is realized through a precision wire twist process. The lay of the twist is held to a tolerance of +/-2% and directionality is maintained in both the go and return legs. Terminations are custom-made, silver plated locking RCA connectors custom designed to our spec. Silver plated Neutrik XLR connectors are optional. MONARCH II SIGNATURE is not fully shielded as we feel as if an unshielded cable is much more dynamic and airy in the top-end. Therefore the stock version is susceptible to interference in areas where high levels of RFI and EMI may degrade performance. However, a shielded version is available upon request if need be. While not directional by design, the cable is imprinted with an arrow at one end. We suggest break-in is directional and the arrow is a useful reference. MONARCH II is meticulously hand assembled to provide excellent performance. Bending 90 degrees or more will damage conductors. Avoid cable runs close to AC cords. If they must cross, 90-degree crossing is recommended. Care in handling and dressing will enhance and preserve the sonic capability of your cable. MONARCH II reaches optimal performance after a burn-in period of at least 72 hours. Suitable burn-in tools are a dynamic/wide bandwidth CD or FM white noise heard between stations. CDs made for the purpose are available through audio dealers. These options provide nearly 95% of the signal necessary for ultimate cable performance. Expect maximum response within 30 days. MONARCH II cable is packaged in shielded metalized bags for two reasons. First, your cable is protected from x-ray and EMI screening processes at UPS, FedEx and other carriers. Second, Luminous Audio Technology resources are dedicated to cable technology. We do not believe that you should have to pay for exotic wood, velvet-lined, or other designer containers that add substantially to cable cost. .

Luminous Audio Technology Monarch II Signature Audio Cables - Pair

The signature version of the Monarch II is the most recent addition to our product line. It is identical in topology to the original Monarch II with one exception. We elected to use a 6-nines OFHC copper to give the Monarch II Signature a smoother and more detailed presentation. We consider the new Signature version of the Monarch II to be the best value in our product line. .

Luminous Audio Technology Prestige II Speaker Cables - Pair

The science of cable design (sometimes referred to as an art) is an engineered balance between several well-understood and quantifiable parameters. Prestige II Speaker Cable is the culmination of a meticulous design process which is focused on providing unprecedented value, quality and performance. Prestige II Speaker Cable uses solid core technology implemented by arranging eight individually insulated 20 gauge, high purity OFHC, copper conductors in an isolated/twin-ax array around a central polypropylene and air dielectric core. The spacing between each adjacent conductor is critically maintained during the manufacturing process thereby reducing magnetic interferences between conductors. The finished array is then bound and jacketed in dark gray metallic PVC. Prestige II cable can be terminated in a bi-wire configuration easily upon request. Simply double the cost of the wire and termination. Prestige II Speaker Cable is a unique design which will reward the listener with exceptional fidelity and value. If your interest in music is best served by faithful reproduction of the source, Luminous Audio Technology’s Prestige II Speaker Cable was designed for you. Sold in pairs. .

Luminous Audio Technology Renaissance II Audio Cables - Pair

Renaissance II is a very high quality 18 gauge, solid core 99.997% (4/9s) OFC copper composite with virgin Polyurethane insulation. The cable assembly is ultimately covered with an inert fiberglass mesh to preserve the integrity of the cable and enhance its aesthetic appeal. Renaissance II is terminated with our new custom made silver-plated, locking type RCA connector. Terminations are soldered by hand with Cardas silver/copper content solder. Renaissance II is meticulously hand assembled to provide superior performance. Please avoid bending 90 degrees or more, particularly near terminations, or you may damage conductors. Avoid cable runs close to AC cords as they are unshielded interconnects. If they must cross, a 90-degree crossing is recommended. Care in handling and dressing will enhance and preserve the sonic capability of your cable. Renaissance II reaches optimal performance after a burn in period of at least 72 hours. Suitable burn in tools are a dynamic/wide bandwidth CD or FM white noise heard between stations. CDs made for the purpose are available through various audio dealers. These options provide nearly 95% of the signal necessary for ultimate cable performance. Expect maximum response within 30 days. Renaissance II is packaged in shielded metalized bags for two reasons. First, your cable is protected from x-ray and EMI screening processes at UPS, FedEx and other carriers. Second, Luminous Audio Technology’s resources are dedicated to cable technology and the best quality in materials available at each cable’s price point. We do not believe that you should have to pay for exotic wood, velvet-lined, or other designer containers that add substantially to the final retail cost of the cable. Happy listening! .

Luminous Audio Technology Renaissance II Speaker Cables - Pair

The finest speaker cables available today attempt to balance numerous electrical properties associated with the transmission of audio signals. It is our opinion that Renaissance Speaker Cable incorporates the most successful geometric design to balance all of the electrical properties required for high quality, cost-effective signal transmission. Although geometry plays a significant role in cable sound, materials and construction techniques are of equal importance. Renaissance Speaker Cable use exceptionally high quality materials. Each rail is composed of seven solid gauge 99.997% OFHC conductors isolated by oversized PVC insulators, arranged and sheathed in a premium PVC jacket. The Go and Return legs are kept separate to further reduce capacitance and magnetic interference. Terminations are standard with gold clad copper lugs and 4% silver solder. Other terminations are available upon request. Renaissance Speaker Cable provides unparalleled quality, engineering, and value. As the name implies, Renaissance Speaker Cable is the rebirth of intelligent cable design. Sold in pairs .

Luminous Audio Technology Silver Reference Cables - Pair

Silver Reference began as a never-ending pursuit of perfection. With the development of the Synchestra Reference we found an open and dynamic cable unlike any other we had heard. When Eichmann released the new pure silver bullet we experienced the proverbial lightbulb effect and determined we could expand on the original 4/9’s silver Synchestra. We have had the purity increased to a level in excess of certified 5/9’s and incorporated these wonderful milled silver plugs. Eichmann Technologies of Australia is simply manufacturing the most amazing RCA plug on the market. This beautifully engineered termination bends the rules of ordinary RCA plug design and establishes the neutral performance of the Reference. Initial audition and continuing evaluation of the revolutionary connector showed that this unique termination was a must for a reference interconnect in our product line. The Bullet Plug adjusts to any RCA socket, providing a firm, secure fit that is easy to disconnect and leaves no marks on the socket when removed. Formed of precision- cast, aerospace-grade polymer, the connector shell encloses milled 4/9’s pure silver contact pins. The pin material provides up to 320% greater conductivity than standard brass pins found in most RCA plugs. As RCA plugs vary, so do insulation materials. While our very successful Synchestra is jacketed with silicone, exhaustive listening tests concluded that the bare-conductor Reference prototypes sounded better with no jacketing. This improved cable response, but also increased the possibility of damage to the ultra-high quality 22 -gauge pure 5/9s (99.9997) silver conductors. The solution was a magic jacket of highly inert fine-mesh fiberglass cloth, a material extremely low in capacitance. Only a cushion of air insulates the jacket from the conductors, a solution rivaling no jacket at all. Carried over from the Synchestra to the Silver Reference is the virgin PTFE mil-spec insulation on the copper conductors. Applied immediately following forming of the wire, the coating prevents oxygen permeation of the silver and provides the cleanest path for the audio signal. Listening tests have conclusively revealed that the non-jacketed conductors, combined with the silver Bullet Plugs, provides a more detailed and dynamic interconnect than we previously have offered. The Silver Reference is, however, more susceptible to mishandling without a jacket of synthetic material surrounding the conductors. Do not bend the interconnect at 90 degrees or greater, do use the plug body to remove the interconnect from RCA jacks instead of pulling on the fiberglass jacket, and minimize twisting of the plugs when inserting or removing from components. The sonic merits of the Silver Reference will provide a lifetime of listening enjoyment. .

Luminous Audio Technology Synchestra Audio Cables - Pair

Synchestra Interconnect was designed to provide incomparable performance at an unusually affordable price. Simplicity itself, Synchestra Interconnect incorporates a refined twin axial design utilizing 21 gauge, high purity (99.997%) solid core, pure silver conductors sheathed in PTFE. A premium silicone jacket is employed to protect the delicate conductors. Synchestra Interconnect is terminated using the reputable Cardas Silver RCAs and silver solder. Synchestra Interconnect provides exceptional clarity and detail coupled with a neutrality that must be heard to be appreciated. No cable that we have auditioned in its price range, has provided the level of performance that Synchestra Interconnect provides. If you are looking for the ultimate in musical presentation you owe it to yourself to audition Synchestra Interconnect. (Synchestra Interconnect is not fully shielded. This should be considered in areas where high levels of RF or EM interface may adversely affect cable performance.) A shielded or balanced version is available for a modest charge. .

Luminous Audio Technology Synchestra Reference Audio Cables - Pair

Synchestra Reference begins--and ends--with the Bullet Plug from Eichmann Technologies of Australia. This beautifully engineered termination bends the rules of ordinary RCA plug design and establishes the neutral performance of the Reference. Initial audition and continuing evaluation of the revolutionary connector showed that this unique termination was a must for a reference interconnect in our product line. The Bullet Plug adjusts to any RCA socket, providing a firm, secure fit that is easy to disconnect and leaves no marks on the socket when removed. Formed of precision- cast, aerospace-grade polymer, the connector shell encloses milled tellurium copper contact pins flash-plated with 24-karat gold. The pin material provides up to 320% greater conductivity than standard brass pins found in most RCA plugs. As RCA plugs vary, so do insulation materials. While our very successful Synchestra Signature is jacketed with silicone, exhaustive listening tests concluded that the bare-conductor Reference prototypes sounded better with no jacketing. This improved cable response, but also increased the possibility of damage to the ultra-high quality 20 -gauge ONO 6/9s (99.99998) single-crystal copper conductors. The solution was a magic jacket of highly inert fine-mesh fiberglass cloth, a material extremely low in capacitance. Only a cushion of air insulates the jacket from the conductors, a solution rivaling no jacket at all. Carried over from the Signature to the Reference is the mil-spec polyurethane coating on the copper conductors. Applied immediately following forming of the wire, the coating prevents oxygen permeation of the copper and provides the cleanest path for the audio signal. Listening tests have conclusively revealed that the non-jacketed conductors, combined with the Bullet Plugs, provides a more detailed and dynamic interconnect than we previously have offered. The Reference is, however, more susceptible to mishandling without a jacket of synthetic material surrounding the conductors. Do not bend the interconnect at 90 degrees or greater, do use the plug body to remove the interconnect from RCA jacks instead of pulling on the fiberglass jacket, and minimize twisting of the plugs when inserting or removing from components. The sonic merits of Synchestra Reference will provide a lifetime of listening enjoyment. Thank you for choosing Luminous Audio Technology products to complement your home audio or theater system. .

Luminous Audio Technology Synchestra Signature Cables - Pair

The Signature version of the Synchestra is a true cost-no-object effort, nearly identical in topology to its brother with a slight twist. The most significant difference is the use of a continuous cast, 6-nines copper manufactured to critical tolerances. Immediately following the casting process, the raw copper wire is coated with a military grade enamel, therefore eliminating oxygen permeation. The process is absolutely state-of-the-art resulting in a crystal grain structure exceeding 100 meters in length (allowing many interconnects to be manufactured from a single grain of copper). In addition, we are using a very sophisticated soldering process with Siltech silver solder and a slightly larger silicone jacket. .

Luminous Audio Technology Synchestra Signature Speaker Cables - Pair

Developing a speaker cable that would complement our acclaimed Synchestra Signature interconnect proved extremely difficult. We began experimenting with a variety of prototypes containing our superior quality continuous cast, single crystal pure copper used in the Synchestra Signature interconnect. Diameters and numbers of conductors varied as we continued developing the new cable. Initial tests produced a very detailed and smooth sounding product. However we knew from years of experience that the answer was not in a large number of very small diameter conductors. Exhaustive testing proved that 18-gauge conductors created the ideal balance between high frequency and bass performance. After months of discussion, innumerable prototypes and hundreds of listening tests we successfully joined design and material in a speaker cable that mated perfectly with Synchestra Signature interconnect. In harmony with Luminous Renaissance and Synchestra speaker cables, Synchestra Signature is composed of two independent go and return legs. Isolated helical arrays of four 18-gauge continuous cast, single crystal ONO 99.99998% (6/9s) copper conductors and five empty polyethylene tubes create an ideal balance of inductance, capacitance and resistance. Combining premium virgin PVC and polyethylene with paper, fabric and air as dielectrics provides an exceptional reduction in hysteresis distortions. Terminations are custom gold-plated copper spades manufactured to our specifications, with optional silver-plated spades or high quality locking banana plugs upon request. All terminations are crimped and silver soldered. We are proud to introduce our new flagship speaker cable, Synchestra Signature, another Luminous Audio Technology product of unparalled performance. Sold in pairs .

Luminous Audio Technology Synchestra Speaker Cables - Pair

Engineering a speaker cable which would complement the Synchestra Interconnect proved to be a difficult, yet rewarding endeavor. We needed a very fast, articulate and extremely focused cable. We are proud to introduce the Synchestra Speaker Cable. The Synchestra Speaker Cable is the result of hundreds of hours comparing numerous prototypes with the above goal in mind. The Synchestra Speaker Cable utilizes a high purity silver (99.997%) solid core 16 gauge composite conductor network sheathed in virgin PTFE. The PTFE conductors are then surrounded in PVC and bound by a premium nylon mesh jacket in order to preserve the integrity of the composite. Similar to the Renaissance Speaker Cables, the Go and Return legs are kept separate to reduce capacitance and magnetic interaction. Terminations are standard with silver clad copper spade lugs and Siltech solder. Other terminations are available upon request. Sold in pairs. 0-3 business

Magnum Dynalab MD-100 FM Tuner

The MD-100, surmising over 20 years of experience in the design of FM tuning technology, offers not only a new reference in terms of sonic realism, but also yields the utmost in flexibility through our optional FTR (internal remote interface system) and standard balanced audio outputs.

Magnum Dynalab MD-100T Triode FM Tuner

The third addition to our line of Triode Tube FM ANALOG tuners, the MD 100T is built with the same precision aligned R.F. section found in the highly capable MD 100. In addition, we have added the specially designed MD Reference 6922 tubes in the audio amplification stage, providing audio realism for those customers with a special partiality for the tube experience. The MD 100T offers not only a new reference in terms of sonic realism, but also yields the utmost in flexibility through our optional Precision Analog Remote System, and standard balanced audio outputs.

Magnum Dynalab MD-105 FM Tuner

A core member of our line-up of solid state, analog FM tuners, the MD 105 follows in the footsteps of our original flagship model, the MD 108. With its precision aligned R.F. section and the tolerance matching components in the audio section, the MD 105 is able to produce realism from a live performance that even the best CD players cannot match. Many radio stations are improving their transmission equipment, allowing you to experience FM as it was intended, with the full emotion and zeal with which the music was originally recorded.

Magnum Dynalab MD-105T Triode FM Tuner

One of our most popular tuners, the MD 105T is a staple in our line up Triode Tube FM ANALOG tuners. Built with the same precision aligned R.F. section found in the highly capable MD 105, we have added MD Reference 6922 tubes in the amplification stage of the audio section, providing audio realism and coloration for those customers with a special partiality for tube technology. With improving RF transmission equipment around the world, this Triode tuner, with its distinctive audio stage, allows you to experience FM as it was intended, with the full emotion and zeal with which the music was originally recorded. It is pure, unaltered, source audio.

Magnum Dynalab MD-107T Triode FM Tuner

The MD 107T FM Tuner is one of our flagship products here at Magnum Dynalab. As the original offering in our successful series of Hybrid FM tuners, the MD 107 Triode is the first of Magnum Dynalab's FM tuners to use tube technology in the audio amplification stage. Consistent with our design philosophy to separate the analog R.F. section and the audio section, the MD 107T FM Tuner provides a Magnum tuner for those customers with a special partiality for the tube experience.

Magnum Dynalab MD-108T Triode FM Tuner

The predecessor and backbone of the new MD 108T Triode Tube FM Tuner , the MD 108, is one of the most successful standalone FM tuners we have ever introduced. It has been a staple of the Magnum Dynalab collection for over 10 years and the first of our tuners to employ the distinctive and incredibly precise MAGIC EYE tube for tuning, and also the first of our products to utilize a separate audio stage within the unit.

Magnum Dynalab MD-109T Triode FM Tuner

Primary highlights include an ultra stable power supply, a direct output Triode audio section and most importantly, the introduction of the World Source Platform. The World Source Platform represents the culmination of 2 years of internal development, and the commitment with which we have embraced the evolution of the multi-format audio source environment that we live in today.

Magnum Dynalab MD-205 Signal Sleuth FM Signal Amplifier

The SIGNAL SLEUTH brings with it a whole new world of FM-stereo enjoyment. Whether it be Bach, rock, or current affairs, the SLEUTH will e x p a n d your world of FM-stereo entertainment, bringing you more FM stations, more clearly Put simply, the SIGNAL SLEUTH ... amplifies weak FM signals cleanly attenuates strong, harsh signals without coloration stabilizes FM antenna (and FM cable) signals separates interfering adjacent-station signals reduces multipath problems Along with establishing a clearer, crisper sound, a most important attribute of the SLEUTH is its ability to establish and maintain a useable FM program signal level. In most cases, this will eliminate the annoying flip-flop stereo-to-mono-to-stereo switching usually experienced with many FM tuners having non-variable, automatic blend circuits. The SLEUTH FM signal amplifier has already awakened many FM enthusiasts to the brightness and depth available with a stronger FM signal. As a matter of fact, it prompted one customer to refer to his SLEUTH as ... One FM accessory no true audiophile should be without! Easy to install and even easier to use, the SLEUTH model 205 fits neatly into just about any component or integrated receiver system. As such, it brings all its fine attributes to your fingertips while maintaining a sleek but unobtrusive demeanor within the system.

Magnum Dynalab MD-209 Stereo FM Receiver

The MD 209 ... An Integrated Audio Receiver for the Evolution of the Home Audio System From our pedigree in pure analog circuitry, we re proud to introduce our most uncompromising 2-channel Audio Receiver. Loaded with features, and stocked with Magnum Dynalab's unrelenting build quality and audio engineering, the new MD-209 is a future-ready anchor for your high-performance home audio system.

Magnum Dynalab MD-309 Integrated Amplifier

The MD 309 ... a Hybrid Integrated Amplifier for the Evolution of the Home Audio System From our pedigree in pure analog circuitry, we re proud to introduce our most uncompromising 2-channel Integrated Amplifier. Using the same Hybrid-Acoustic circuitry found in our MD-209 Audio Receiver, our proprietary 6922 Cryovalve tubes, and stocked with Magnum Dynalab's unrelenting build quality and audio engineering, the new MD-309 is a future-ready anchor for your high-performance home audio system.

Magnum Dynalab MD-307 Integrated Amplifier

The 3rd product to feature our in-house designed Hybrid-Acoustic circuitry, the MD 307 Hybrid Integrated Amplifier is, on the inside, a twin brother to the widely acclaimed MD 309 Hybrid Integrated Amplifier. Only the faceplate design and lack of a front-panel touchscreen differentiates the two products, with the MD 307 featuring identical circuitry and functionality to the MD 309. With output specs worthy of inclusion in any high-performance home audio system, and build quality that will ensure many years of service, the MD 307 is for the 2-channel audio-enthusiast who puts a high premium on uncompromising performance, without incurring additional costs for cosmetic highlights.

Magnum Dynalab MD-306 Integrated Amplifier

The 2nd introduction in our series of Hybrid Integrated Amplifiers, the MD 306 is another serious solution for the 2-channel audio enthusiast. With the same proven Hybrid-Acoustic circuitry found in all of our integrated amplifiers and receivers, the MD 306 is built on the backbone of our MD 209's pre-amp and amplifier sections, boasting 125 Watts of output power with a flexible feature set. It is a hybrid integrated amplifer that can perform in a wide array of listening environments, and like all Magnum Dynalab products, it is built to withstand the most demanding operation over the long haul.

Magnum Dynalab MD-301 Integrated Amplifier

Similar to the MD 309, MD 307 and MD 306, the new MD 301 incorporates this hybrid design in a product with an impressive list of specifications. Outputting 100 Watts into 8 Ohms (200W into 4 Ohms), and a flexible feature set, the MD 301 is far from 'entry-level'. Rather, it is a serious piece of audio equipment, designed for those ready to take a step forward in audio design technology.

Magnum Dynalab MD-90 FM Tuner

As successor to the FT101A, one of the most sensitive, selective and sonically accurate FM tuners of our time, the MD-90 continues the tradition by re-defining state-of-the-art in analog FM tuner design. As did the FT-101A, the MD-90 combines the very latest in discrete, analog technology. Its highly renowned MOSFET front end provides 3 stages of very careful and precise amplification. Here even the most fragile of signals is strengthened and further defined by using highly effective group delay filtering. The result is a sonically correct audio signal, one that contains all the inherent richness and brilliance of the source being broadcast.

Magnum Dynalab MD-90T Triode FM Tuner

Developed to co-exist with the MD 90, the MD 90T is also a successor to the FT101A, one of the most sensitive, selective and sonically accurate FM tuners of our time. The MD 90T continues the tradition by re-defining state-of-the-art in analog FM tuner design. As did the FT-101A, the MD-90T combines the very latest in discrete, analog technology. In addition to its highly renowned MOSFET front end, which provides 3 stages of very careful and precise RF amplification, we have added the Triode audio section, which includes a Philips military grade 6922 tube in the amplification stage. This addition provides audio realism and the bigger sound stage characteristics heard only through the tube experience.

Magnum Dynalab MD-807T Internet Media Tuner

When creating a line of INTERNET MEDIA TUNERS worthy of inclusion in any high-performance audio system, we wanted to build not only world-leading products, but also a flexible line-up. Boasting the same functionality found in our MD 809 INTERNET MEDIA TUNER, the MD 807 is a product built with the audio-purist in mind. With simplified styling, the MD 807 features a beefy audio stage, our top-end DAC design not often found in a source device. It is yet another product that is helping us put Internet radio and connected digital music collections on the same plane as more conventional sources in home audio.

Magnum Dynalab MD-806T Internet Media Tuner

The 2nd introduction in our line-up of INTERNET MEDIA TUNERS , the MD 806 brings years of expertise in analog sound staging, our proven development in D-to-A conversion technology, and innovative new software to unlock a near limitless access to music. With access to over 20,000 Internet radio stations and the ability to unlock the true sound potential in your digital music collection, the MD 806 can be a true staple among your collection of source audio products.

Magnum Dynalab MD-801 Internet Media Tuner

Our line of INTERNET MEDIA TUNERS starts with the MD 801, but this product is far from entry-level. It is, like our long-standing line of FM tuners, worthy of inclusion in any high-performance home audio system, and even whole-house installations. And with access not only to Internet radio, but also an easy way to navigate your existing collection of digital audio, our line of INTERNET RADIO TUNERS is an exciting next step in the evolution of distributed audio.

NHT Absolute Center Speaker - Each

We’ve come to grips with the fact that while we prefer a 3-way design for center channel speakers, we knew our preference made the center channel price of admission too dear for many. So the challenge was to design a compact, affordable center with the sonic spread of NHT’s 3-way designs with the laughably articulate sound goodness that is expected from every speaker with the NHT badge. The result is the Absolute Center, the new center of choice for the Absolute Zero bookshelf speaker. Now everybody is happy. The NHT engineering department can once again sleep comfortably knowing more people can afford to put NHT at the Absolute Center of their home theater speaker choice.

NHT Absolute Tower Speaker - Each

Our first new product of the decade, The Absolute Tower is the new sleek and affordable floor-standing speaker solution for high-performance music or home theater systems. The design joins together the Absolute Zero bookshelf mini-speaker with 2 newly designed 5.25 woofers (in a separate chamber) in a slender column-like enclosure. The best speakers to combine with the Absolute Tower would be the Absolute Zero for the surround speakers and the Absolute Center center channel speaker for a seamlessly matched, yet surprisingly affordable home theater system. The Absolute Tower loudspeaker is an all-acoustic suspension design. Acoustic suspension designs utilize nature's perfect spring force, air, to damp and control the speaker motion like high performance shocks on a sports car. This significantly lowers distortion for long, fatigue-free listening and improves impulse response allowing subtle detail to be revealed, making everything sound more real. Acoustic suspension designs also allow incredible power handling. The Absolute Tower's floor standing cabinets are beautiful: delicate, yet incredibly robust. The Absolute Towers extensively braced cabinets are acoustically inert so unwanted cabinet vibrations will never be added to your music. They weigh in at a bit over 35 lbs. each and are constructed of medium density fiberboard. The gently sculpted base puts the Absolute Tower on stable footing and is weighted with a hidden steel plate to provide mass where it is acoustically desirable - further reducing cabinet-born resonances. The Absolute Towers, like all NHT Classic Series loudspeakers, are finished with 2 primer coats, 7 color coats of polyester paint, and topped with 2 coats of clear acrylic polymer.

NHT Absolute Zero Bookshelf Speaker (Black) - Each

Every litter has its runt. And yep, this would be ours. But while these little shavers physically measure roughly the height of… oh, let’s say… an upright gerbil, it would be a mistake to think of them that way. Simply because when it comes to coaxing clean and laughably articulate sound out of a dinky box, if pushed, these puppies will flutter your eyelids. Which is why these are the real deal for small to medium sized rooms where maximizing minimal space is the drill.

NHT Absolute Zero Bookshelf Speaker (White) - Each

NHT B-10d Powered Subwoofer

The NHT B-10d subwoofer is a really compact high-end powered subwoofer for home theater and stereo music systems that says you're dead serious about good sound. It combines 23 years of speaker building know-how to deliver more sonic bang for the buck than any compact subwoofer NHT has ever built.

NHT B-12d Powered Subwoofer

The new B-12d subwoofer is a compact, smart and affordable high-end powered subwoofer for home theater and stereo music systems that says you're dead serious about good sound. Everything we’ve learned in our 23 years of building great speakers was rolled into the best powered twelve-inch subwoofer we’ve ever built.

NHT Classic Four Tower Speakers - Each

NHT Classic Four Tower Speakers (and dare we say in the politest possible way), massively round bottom. This bottom, thanks to the addition a 10 side-firing subwoofer, inserts some serious rumbly in the tumbly (not to mention being pretty sweet in the looks department). Perfect for medium to large sized rooms, the Four offers ridiculously robust dynamics and can stuff every inch of a big space with insanely believable, life-sized sound.

NHT Classic Three Bookshelf Speaker - Each

The Classic Three is probably the best bookshelf speaker we’ve ever made. Period. Which is saying a lot considering we’ve made upwards of, oh… at last count… about 37 trillion bookshelf speakers in our day. Top dawg. Numero uno. El supremo. What separates these from all the forgettable imposters that were spawned in its wake is its ability to put you in a genuinely believable 3-D headspace without the goofy 3-D glasses. Perfect for music and movies in medium sized rooms.

NHT Classic Three C Center Speaker - Each

Funny thing about speakers in general, and center channel speakers in specific. Some look bad and sound bad. Others look good and sound bad. While yet others look bad and sound good. You tracking? Good. Well, here we have the rare center-channel exception that looks flat out stunning and sounds bad… the good bad. Matched with the Three and Four, the Three C uses two 6.5 aluminum cone woofers and our new midrange tweeter cluster to create a gi-normous listening area.

NHT Classic Two Bookshelf Speaker (Black) - Each

Just a smidgen taller and wider than our Absolute Zero, the Classic Two is pretty much a Absolute Zero that we super-sized - a little deeper bass extension and the poop to run with a bit more horsepower. Built for absolutely no other reason than to make much larger and more expensive speakers sound like complete ca-ca, these little guys genuinely light up small to medium sized rooms with drop dead accuracy and detail. They work like crazy for both movies and music without unloading a ton of coin.

NHT Classic Two Bookshelf Speaker (White) - Each

NHT Classic Two C Center Speaker

With its roots grounded in proven cookie technology (keep reading), the Classic Two C is a 3-way center channel that punks ANY 2- way-2-woofer design when combined with our Absolute Zero and Two speakers. Okay, back to the cookie thing. Think of an Oreo. Pretty darn good, just those two wafers, right? Well, what happens when you smush that white stuff in the middle - magic happens, that’s what. The Classic Two C is the white stuff - making the magic happen by expanding the sweet spot in any room.

NHT iC2 In-Ceiling Speakers - Pair

The iC2 features NHT’s (U.S. Patent #5,952,619) 3-tweeter array that produces flat frequency response up to 60 degrees off-axis that creates a consistent soundfield throughout any room. Sort of a blanket of sound, really. Well, come to think of it, more like a very thick, massively large, fluffy down comforter of sound hung carefully from the ceiling as opposed to let’s say, a thin, cotton sheet taped to a light fixture. See the difference? Probably not. But you will hear it.

NHT iC4 In-Ceiling Speakers - Pair

Every time we turn around it seems we find ourselves fielding the same question - who’s your daddy? In so many words, anyway Well, on the in-ceiling front, there’s simply no other answer - the iC4. It offers the Montana version of full-range response combining NHT’s (U.S. Patent #5,952,619) 3-tweeter array and the Big Daddy - an aluminum cone, 8 hella-long-throw woofer that can jostle innards and boom a base line to a ridiculous 40Hz. Yowza.

NHT iW3 In-Wall Speakers - Pair

For most, it seems conversation surrounding in-wall speakers vs. freestanding speakers pretty much begins and ends with what you lose. This always struck us as a dumb way to approach the realities of an in-wall speaker system. So we spit on our hands, strapped on our thinking caps, locked ourselves in a room (with a six er of Red Bull), threw conventional wisdom off the premises and built the iW3. The result is a 3-way in-wall that makes knocking a hole your walls as desirable as central heating in the Yukon.

NHT iW4 In-Wall Speaker - Each

NHT iW4 In-Wall Speakers Plain and simple, the iW4 is just nuts. It really is. Something about the three-way, dual woofer with the mid-tweeter cluster from our Classic series probably has a great deal to do with it. So does the high-power handling capacity. As does the fact they fit between 16 studs either horizontally or vertically. But what really drives these suckers through your roof is the fact that they go in a wall at all. The sonics are just nuts. It’s almost hard to believe that sort of detail and accuracy coming out of anything, let alone a wall.

NHT iWF Acoustic Foam Insert - Pair

NHT iWF can improve the performance of NHT and other in-wall speakers by reducing wall vibration and improving midrange clarity. Just stuff one insert above and one below the in-wall speaker cavity.

NHT O2 Outdoor Speaker - Each

Like all NHT speakers the O2 sounds powerful and natural while playing music or movies. If you’re shopping for an outdoor speaker that will seamlessly blend into the landscape but still produce sound that rivals the best bookshelf speakers, stop searching and start buying.

NHT iCB6 In-Ceiling Speaker Brackets (Pair)

The iCB6 pre-construction bracket is used to frame out the in-ceiling speaker location prior to sheetrock application. The iCB6 eliminates the need to cut holes for new speaker installations and makes speaker locations predictable rather than cutting holes blind. For new construction or remodeling when ceiling joists are exposed. The iCB6 also makes for easy post sheetrock speaker installation in ceiling. The iCB6 fits the NHT iC1, iC2, iC3 in-ceiling speakers. One kit contains 2 brackets for 2 speakers.

NHT iCB8 In-Ceiling Speaker Brackets (Pair)

The iCB8 pre-construction bracket is used to frame out the in-ceiling speaker location prior to sheetrock application. The iCB8 eliminates the need to cut holes for new speaker installations and makes speaker locations predictable rather than cutting holes blind. For new construction or remodeling when ceiling joists are exposed. The iCB8 also makes for easy post sheetrock speaker installation in ceiling. The iCB8 fits the NHT iC4 8" 3-tweeter in-ceiling speakers. One kit contains 2 brackets for 2 speakers.

NHT iWB In-Wall Speaker Brackets - Pair

The iWB pre-construction bracket is used to frame out the in-ceiling or in-wall speaker location prior to sheetrock application. The iWB eliminates the need to cut holes for new speaker installations and makes speaker locations predictable rather than cutting holes blind. For new construction or remodeling when ceiling and joists and wall studs are exposed. The iWB also makes for easy post sheetrock speaker installation in walls or in-ceiling. The iWB fits the NHT iW1, iW2, iW3 in-wall speakers. One kit contains 2 brackets for 2 speakers.

NHT iW4B In-Wall Speaker Brackets - Each

The iW4B mounting bracket is included with the IW4 or available separately if intended to be used to frame out the in-ceiling or in-wall speaker location prior to sheetrock application. The iW4B eliminates the need to cut holes for new speaker installations and makes speaker locations predictable rather than cutting holes blind. For new construction or remodeling when ceiling and joists and wall studs are exposed. The iW4B also makes for easy post sheetrock speaker installation in walls or in-ceiling. The iW4B fits the NHT iW4 in-wall speakers. One kit contains 1 brackets for 1 iW4 speaker.

Plateau Balance 59 Video Stand - Walnut

This Series is perfect for those individuals who want to enter the fine world of quality audio/video furnishings. Visually pleasing, the BALANCE Series makes a real statement about every owner’s commitment to a complete audio/video experience. The high grade smooth edged safety glass (the top shelf is 1/2 (12mm) thick) adds a luxurious aura to any room. Available in a choice of luxurious natural woods - Black Oak (B), Espresso (E) and Walnut (W). Black Glass available. The beauty and genius of the design allows for easy assembly (approximately 5 minutes). Superior Modern Styling with real woods. Offered in Black Oak, Espresso and Walnut. Same price for any finish. High quality safety glass shelves with polished edges (top shelf is 1/2 thick). Easy assembly. Overall approx. size: 16 h x 59 w x 21 d. Black Glass Available. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for High-Res Image #4 Click for High-Res Image #5 Click for High-Res Image #6 Click for High-Res Image #7 Click for Brochure

Plateau Balance 59 Video Stand - Black

Plateau Balance 59 Video Stand - Espresso

Plateau Casters - Set

Plateau casters are designed for use with Plateau CRX, LS, SE, and XT series audio and video racks and stands. Sold in sets 1-2 directly from Plateau.

Plateau CRX-2V-54 Video Stand

Offering Plateau’s legendary high quality with premium components, these units feature high quality glass middle shelves with polished edges. They have been built for the serious connoisseur who recognizes the importance of bringing an aesthetic touch and grand functionality to a room. The CRX - Video Series is designed for the current generation video monitors. The Series design makes it possible to turn all of your audio/video components into the Ultimate Furniture Design System. Shaped 3/4 (19mm) panels - supported by 2 x 2 (51mm x 51mm) steel tubing, create a stand that is extremely strong and rigid. Available in a natural Black Oak (B) wood. This priceless gem is a beautiful and magnificent combination of strength, style and versatility. It’s a must for those who only accept the best. Superior Modern Styling using real Oak. Strong heavy gauge 2 x 2 (51mm x 51mm) steel tube assembly. Black baked powder-coat finish. High quality safety glass shelf with polished edges. Overall approx. size: 54 - 16 h x 54 w x 19 d. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for Brochure

Plateau CRX-2V-64 Video Stand

Offering Plateau’s legendary high quality with premium components, these units feature high quality glass middle shelves with polished edges. They have been built for the serious connoisseur who recognizes the importance of bringing an aesthetic touch and grand functionality to a room. The CRX - Video Series is designed for the current generation video monitors. The Series design makes it possible to turn all of your audio/video components into the Ultimate Furniture Design System. Shaped 3/4 (19mm) panels - supported by 2 x 2 (51mm x 51mm) steel tubing, create a stand that is extremely strong and rigid. Available in a natural Black Oak (B) wood. This priceless gem is a beautiful and magnificent combination of strength, style and versatility. It’s a must for those who only accept the best. Superior Modern Styling using real Oak. Strong heavy gauge 2 x 2 (51mm x 51mm) steel tube assembly. Black baked powder-coat finish. High quality safety glass shelf with polished edges. Overall approx. size: 64 - 16 h x 64 w x 19 d. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for Brochure

Plateau Decor 50 Video Cabinet - Walnut

This Series is the perfect union of wood, metal and glass - design objective accomplished! The cabinet unit is supported by welded heavy gauge steel tube construction, providing strength and style. The high grade smooth edged safety glass (the top shelf is 1/2 (12mm) thick) adds an appealing aura to any room. Detailed features include back panels that offer ample ventilation and cable management, and precision quality hinges. Available in a choice of luxurious natural woods - Black Oak (B), Espresso (E) and Walnut (W). Available in Black or Silver metal frames. (Black Glass available on Black Frame Models in Black Oak or Walnut finishes.) Numerous useful and unique options place this unit way ahead of the competition. The DeCOR Series combines both functionality - for displaying and organizing your components - while providing a visually impressive statement to your audio/visual system. Wood cabinet shipped built - minimal assembly required. Superior Modern Styling with real woods. Offered in Black Oak, Espresso and Walnut. Available in Black or Silver metal frames. Same price for any finish. High quality safety glass shelves with polished edges (top shelf is 1/2 thick). Premium hinges. Easy assembly (Wood cabinet shipped built). Overall approx. size: 19 h x 50 w x 21 d. Black Glass - Available on Black Frame models in Black Oak or Walnut finishes. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for High-Res Image #4 Click for High-Res Image #5 Click for High-Res Image #6 Click for High-Res Image #7 Click for High-Res Image #8 Click for High-Res Image #9 Click for High-Res Image #10 Click for High-Res Image #11 Click for High-Res Image #12 Click for High-Res Image #13 (black glass) Click for High-Res Image #14 (back) Click for High-Res Image #15 (handle) Click for High-Res Image #16 (hinge) Click for High-Res Image #17 (lifestyle) Click for High-Res Image #18 (with equipment) Click for High-Res Image #19 Click for High-Res Image #20 Click for High-Res Image #21 Click for High-Res Image #22 Click for Brochure

Plateau Decor 50 Video Cabinet - Black

Plateau Decor 50 Video Cabinet - Espresso

Plateau Decor 71 Video Cabinet - Walnut

This Series is the perfect union of wood, metal and glass - design objective accomplished! The cabinet unit is supported by welded heavy gauge steel tube construction, providing strength and style. The high grade smooth edged safety glass (the top shelf is 1/2 (12mm) thick) adds an appealing aura to any room. Detailed features include back panels that offer ample ventilation and cable management, and precision quality hinges. Available in a choice of luxurious natural woods - Black Oak (B), Espresso (E) and Walnut (W). Available in Black or Silver metal frames. (Black Glass available on Black Frame Models in Black Oak or Walnut finishes) Numerous useful and unique options place this unit way ahead of the competition. The DeCOR Series combines both functionality - for displaying and organizing your components - while providing a visually impressive statement to your audio/visual system. Wood cabinet shipped built - minimal assembly required. Superior Modern Styling with real woods. Offered in Black Oak, Espresso and Walnut. Available in Black or Silver metal frames. Same price for any finish. High quality safety glass shelves with polished edges (top shelf is 1/2 thick). Premium hinges. Easy assembly (Wood cabinet shipped built). Overall approx. size: 19 h x 71 w x 21 d. Black Glass - Available on Black Frame Models in Black Oak or Walnut finishes. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for High-Res Image #4 Click for High-Res Image #5 Click for High-Res Image #6 Click for High-Res Image #7 Click for High-Res Image #8 Click for High-Res Image #9 Click for High-Res Image #10 Click for High-Res Image #11 Click for High-Res Image #12 Click for High-Res Image #13 Click for High-Res Image #14 (black glass) Click for High-Res Image #15 (black glass) Click for Brochure

Plateau Decor 71 Video Cabinet - Black

This Series is the perfect union of wood, metal and glass - design objective accomplished! The cabinet unit is supported by welded heavy gauge steel tube construction, providing strength and style. The high grade smooth edged safety glass (the top shelf is 1/2 (12mm) thick) adds an appealing aura to any room. Detailed features include back panels that offer ample ventilation and cable management, and precision quality hinges. Available in a choice of luxurious natural woods - Black Oak (B), Espresso (E) and Walnut (W). Available in Black or Silver metal frames. (Black Glass available on Black Frame Models in Black Oak or Walnut finishes) Numerous useful and unique options place this unit way ahead of the competition. The DeCOR Series combines both functionality - for displaying and organizing your components - while providing a visually impressive statement to your audio/visual system. Wood cabinet shipped built - minimal assembly required. Superior Modern Styling with real woods. Offered in Black Oak, Espresso and Walnut. Available in Black or Silver metal frames. Same price for any finish. High quality safety glass shelves with polished edges (top shelf is 1/2 thick). Premium hinges. Easy assembly (Wood cabinet shipped built). Overall approx. size: 19 h x 71 w x 21 d. Black Glass - Available on Black Frame Models in Black Oak or Walnut finishes. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for High-Res Image #4 Click for High-Res Image #5 Click for High-Res Image #6 Click for High-Res Image #7 Click for High-Res Image #8 Click for High-Res Image #9 Click for High-Res Image #10 Click for High-Res Image #11 Click for High-Res Image #12 Click for High-Res Image #13 Click for High-Res Image #14 (black glass) Click for High-Res Image #15 (black glass) Click for Brochure

Plateau Decor 71 Video Cabinet - Espresso

This Series is the perfect union of wood, metal and glass - design objective accomplished! The cabinet unit is supported by welded heavy gauge steel tube construction, providing strength and style. The high grade smooth edged safety glass (the top shelf is 1/2 (12mm) thick) adds an appealing aura to any room. Detailed features include back panels that offer ample ventilation and cable management, and precision quality hinges. Available in a choice of luxurious natural woods - Black Oak (B), Espresso (E) and Walnut (W). Available in Black or Silver metal frames. (Black Glass available on Black Frame Models in Black Oak or Walnut finishes) Numerous useful and unique options place this unit way ahead of the competition. The DeCOR Series combines both functionality - for displaying and organizing your components - while providing a visually impressive statement to your audio/visual system. Wood cabinet shipped built - minimal assembly required. Superior Modern Styling with real woods. Offered in Black Oak, Espresso and Walnut. Available in Black or Silver metal frames. Same price for any finish. High quality safety glass shelves with polished edges (top shelf is 1/2 thick). Premium hinges. Easy assembly (Wood cabinet shipped built). Overall approx. size: 19 h x 71 w x 21 d. Black Glass - Available on Black Frame Models in Black Oak or Walnut finishes. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for High-Res Image #4 Click for High-Res Image #5 Click for High-Res Image #6 Click for High-Res Image #7 Click for High-Res Image #8 Click for High-Res Image #9 Click for High-Res Image #10 Click for High-Res Image #11 Click for High-Res Image #12 Click for High-Res Image #13 Click for High-Res Image #14 (black glass) Click for High-Res Image #15 (black glass) Click for Brochure

Plateau FL-3V Video Stand

THE FL SERIES: This series of video stands offers style with high quality/premium components. The angled shelves are a high grade smooth safety black glass. Detailed FL-3V (43) features include quality tube construction - covered in virtually indestructible baked powder finish - and a back panel that provides cable management. Designed for the current generation of video monitors, this unit stands out from the rest. Dimensions: 20 H x 43.25 W x 18 D Shelf Depth: 16.75 Shelf Height: 8.5 (Top) 8.25 (Bottom) Shelf Thickness: 0.3 Shelf Capacity: 240 lbs. Top Dimensions: 43 W Front, 20 W Back* *Side is straight with last 6.5 of depth on straight angle to back edge Ships directly from Plateau in 1-2 . Click for High-Res Picture #1 Click for High-Res Picture #2 Click for High-Res Picture #3 Click for High-Res Picture #4 Click for High-Res Picture #5 Click for High-Res Picture #6 Click for High-Res Picture #7 Click for High-Res Picture #8 Click for High-Res Picture #9 Click for Brochure

Plateau LSX-D-42 Video Cabinet - Black

THE LSX SERIES is a premium furniture design, offering a fusion of style and functionality. This luxurious Series offers quality throughout, and provides the perfect compliment to any room setting. Detailed features include back panels that offer ample ventilation and cable management, precision quality hinges. The unit offers adjustable inside shelf height (3 settings), with grill cloth doors. Offered in 2 models: 62 (1579mm) and 42 (1070mm) wide. Available in a choice of natural woods, Black Oak (B) and Walnut (W). Superior Modern Styling with real woods. Offered in Black Oak and Walnut. Same price for any finish. Back panels offer ample ventilation and cable management. Precision quality hinges. Easy assembly. Dimensions: 18.75 H x 42 W x 22 D Inside Shelf Dimensions: 18.5 W x 17.75 D Shelf Height (Adjustable): Top - 6 , 7.25 , 8.5 Bottom: 8.5 , 7.25 , 6 Adjustable Shelf Height: 1.25 Increments Click for Brochure Click for High-Res Picture #1 Click for High-Res Picture #2 Click for High-Res Picture #3 Click for High-Res Picture #4 Click for High-Res Picture #5 Click for High-Res Picture #6 Click for High-Res Picture #7 Normally ships directly from Plateau in 1-2 .

Plateau LSX-D-42 Video Cabinet - Walnut

Plateau LSX-T-62 Video Cabinet - Black

THE LSX SERIES is a premium furniture design, offering a fusion of style and functionality. This luxurious Series offers quality throughout, and provides the perfect compliment to any room setting. Detailed features include back panels that offer ample ventilation and cable management, precision quality hinges. The unit offers adjustable inside shelf height (3 settings), with grill cloth doors. Offered in 2 models: 62 (1579mm) and 42 (1070mm) wide. Available in a choice of natural woods, Black Oak (B) and Walnut (W). Superior Modern Styling with real woods. Offered in Black Oak and Walnut. Same price for any finish. Back panels offer ample ventilation and cable management. Precision quality hinges. Easy assembly. Dimensions: 18.75 H x 62.25 W x 22 D Inside Lower Shelf Dimensions: 18.5 W x 17.75 D Shelf Height Options: Top - 6 , 7.25 , 8.5 (Adjustable) Bottom - 8.5 , 7.25 , 6 (Adjustable) Adjustable Shelf Height: 1.25 Increments Ships directly from Plateau in 1-2 . Click for Brochure Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for High-Res Image #4 Click for High-Res Image #5 Click for High-Res Image #6 Click for High-Res Image #7

Plateau LSX-T-62 Video Cabinet - Walnut

THE LSX SERIES is a premium furniture design, offering a fusion of style and functionality. This luxurious Series offers quality throughout, and provides the perfect compliment to any room setting. Detailed features include back panels that offer ample ventilation and cable management, precision quality hinges. The unit offers adjustable inside shelf height (3 settings), with grill cloth doors. Offered in 2 models: 62 (1579mm) and 42 (1070mm) wide. Available in a choice of natural woods, Black Oak (B) and Walnut (W). Superior Modern Styling with real woods. Offered in Black Oak and Walnut. Same price for any finish. Back panels offer ample ventilation and cable management. Precision quality hinges. Easy assembly. Dimensions: 18.75 H x 62.25 W x 22 D Inside Lower Shelf Dimensions: 18.5 W x 17.75 D Shelf Height Options: Top - 6 , 7.25 , 8.5 (Adjustable) Bottom - 8.5 , 7.25 , 6 (Adjustable) Adjustable Shelf Height: 1.25 Increments Ships directly from Plateau in 1-2 . Click for Brochure Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for High-Res Image #4 Click for High-Res Image #5 Click for High-Res Image #6 Click for High-Res Image #7

Plateau Newport 40 Video Cabinet - Black

THE NEWPORT SERIES is a conversation piece: A luxurious piece of furniture - designed for a corner application, that offers looks and functionality. The middle doors feature interchangeable glass or grill cloth doors. Detailed features include back panels that offer ample ventilation and cable management, precision quality hinges. Offered in 2 models 62 (1575mm) and 40 (1015mm) wide. The unit offers adjustable mid shelf height (3 settings), with end storage space on the NEWPORT 62 model. This Series is designed to stand out from the rest. Available in a natural wood Black Oak (B) and Walnut (W). Superior Modern Styling with real woods. Offered in Black Oak and Walnut. Same price for any finish. Back panels offer ample ventilation and cable management. Precision quality hinges. Easy assembly. Dimensions: 32 H x 40 W x 22 D, 16.75 W Back Edge Inside Shelf Space: Top - 8 H x 37.25 W x 19 D Middle - 9 H x 37 W x 18.75 D Bottom: 9 H x 37 W x 18.75 D Adjustable shelf height inside doors. Click for Brochure Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for High-Res Image #4 Click for High-Res Image #5 Click for High-Res Image #6 Click for High-Res Image #7 Click for High-Res Image #8 Normally ships directly from Plateau in 1-2 .

Plateau Newport 40 Video Cabinet - Walnut

Plateau Newport 62 Video Cabinet - Black

THE NEWPORT SERIES is a conversation piece: A luxurious piece of furniture - 62 (1575mm) wide - designed for a corner application, that offers looks and functionality. All doors feature interchangeable glass or grill doors. Detailed features include back panels that offer ample ventilation and cable management, and precision quality hinges. The unit offers adjustable mid shelf height (3 settings), with end storage space. This Series is designed to stand out from the rest. Available in a choice of luxurious natural woods - Black Oak (B) and Walnut (W). Superior Modern Styling with real woods (Black Oak and Walnut finish). Your choice of clear or black glass. Corner unit application. Interchangeable glass or grill cloth doors (both included). Premium hinges. Overall approx. size: 18 h x 62 w x 22 d. Full brochure w/ Dimensions Top shelf: Front Edge 1575mm 62.00 Back Edge 985mm 38.75 Depth 559mm 22.00 Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for High-Res Image #4 Click for High-Res Image #5

Plateau Newport 62 Video Cabinet - Walnut

Plateau RT-23 Speaker Stands - Pair

Uncompromising durability and versatility for the serious music connoisseur. The RT Series of speaker stands combine outstanding acoustic performance with superior state-of-the-art appeal. Contoured upright centers composed of extruded aluminum and heavy gauge steel tops and base, finished in an indestructible, textured baked powder-coat finish, combine in the perfect treatment of function and form. PLATEAU stands can be filled with lead shot or sand to increase stability and reduce annoying distortion. Available in Black, these stands are one of our finest creations. If you could see sound, you would see why quality designed speaker stands are important. Speaker stands dramatically improve the acoustic performance of your speakers. Heavy gauge steel and extruded aluminum centers. Tops and centers available in Black baked powder-coat finish. Durability and versatility. Wire management. Overall approx. height: 23 Ships directly from Plateau in 1-2 . Click for High-Res Picture #1 Click for High-Res Picture #2 Click for Brochure

Plateau SE-A4 Audio Rack

The classic SE Series is a great choice of audio/video furniture for individuals who want to bring exceptional taste and excellence to the total audio experience. Heavy gauge 1 1/2 (38mm) steel tube assembly - available in Black textured baked powder-coat finish - supports 3/4 (19mm) curved and shaped panels that are available in a natural Black Oak (B) wood. As easy to assemble as it is impressive to look at, the SE can be assembled in only 10 minutes. Sleek appearance and strong by design, the SE is clearly for those who appreciate quality. Superior Modern Styling using real Oak. Modular / Expandable. Black baked powder-coat finish. Easy assembly. Overall approx. size: 31 h x 23 w x 19 d. Ships directly from Plateau in 1-2 . Click for High-Res Picture Click for Brochure

Plateau SE-AA1 Add-On Shelf for SE-A4

The classic SE Series is a great choice of audio/video furniture for individuals who want to bring exceptional taste and excellence to the total audio experience. Heavy gauge 1 1/2 (38mm) steel tube assembly - available in Black textured baked powder-coat finish - supports 3/4 (19mm) curved and shaped panels that are available in a natural Black Oak (B) wood. As easy to assemble as it is impressive to look at, the SE can be assembled in only 10 minutes. Sleek appearance and strong by design, the SE is clearly for those who appreciate quality. Superior Modern Styling using real Oak. Modular / Expandable. Black baked powder-coat finish. Easy assembly. Ships directly from Plateau in 1-2 . Click for High-Res Picture Click for Brochure

Plateau SE-V3 Video Rack

The classic SE Series is a great choice of audio/video furniture for individuals who want to bring exceptional taste and excellence to the total audio experience. Heavy gauge 1 1/2 (38mm) steel tube assembly - available in Black textured baked powder-coat finish - supports 3/4 (19mm) curved and shaped panels that are available in Black Oak (B). As easy to assemble as it is impressive to look at, the SE can be assembled in only 10 minutes. The SE - Video Series is designed for the current generation video monitors. Sleek appearance and strong by design, the SE is clearly for those who appreciate quality. Superior Modern Styling using real Oak. Black baked powder-coat finish. Option to assemble with / without mid-shelf center tube. Modular / Expandable. Easy assembly. Overall approx. size: 22 h x 41 w x 19 d. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for High-Res Image #4 Click for Brochure

Plateau SF-3V Video Rack

This Series offers style, form and functionality to any audio/video system. Gently contoured and shaped shelves that are available in a natural Black Oak wood. All models contain a built in wire management system. Heavy gauge 1 1/2 (38mm) steel posts available in a black baked powder-coated finish. Assembles in less than 10 minutes. Strong heavy gauge 1 1/2 steel tubes (black baked powder-coat finish). Superior Modern Styling using real Oak. Overall approx. size: 22 h x 32 w x 15 d. Ships directly from Plateau in 1-2 . Click for High-Res Image Click for Brochure

Plateau SF-4A Audio Rack

This Series offers style, form and functionality to any audio/video system. Gently contoured and shaped shelves that are available in a natural Black Oak wood. All models contain a built in wire management system. Heavy gauge 1 1/2 (38mm) steel posts available in a black baked powder-coated finish. Assembles in less than 10 minutes. Strong heavy gauge 1 1/2 steel tubes (black baked powder-coat finish). Superior Modern Styling using real Oak. Overall approx. size: 30 h x 23 w x 15 d Ships directly from Plateau in 1-2 . Click for High-Res Image Click for Brochure

Plateau SL-2V-50 Video Stand

This Series features an open concept that compliments any room setting. Quality features include wood parts in a rich Black satin finish, and our high grade smooth edged safety glass. This series consists of a selection of Video Stands (26 to 64 ), with a matching Audio Stand and an extensive offering of complimentary tables and mirror accent pieces. Your theater room setting is now harmonious and complete. Superior Modern Styling. Quality wood construction in a rich Black satin finish. High quality safety glass (clear or black) shelves with polished edges. Matching Audio unit and tables and mirror. Easy assembly. Overall approx. size: 19 h x 50 w x 20 d. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for Brochure

Plateau SL-2V-64 Video Stand

This Series features an open concept that compliments any room setting. Quality features include wood parts in a rich Black satin finish, and our high grade smooth edged safety glass. This series consists of a selection of Video Stands (26 to 64 ), with a matching Audio Stand and an extensive offering of complimentary tables and mirror accent pieces. Your theatre room setting is now harmonious and complete. Superior Modern Styling. Quality wood construction in a rich Black satin finish. High quality clear or black safety glass shelves with polished edges. Matching Audio unit and tables and mirror. Easy assembly. Overall approx. size: 19 h x 64 w x 20 d Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 (black glass) Click for Brochure

Plateau SL-3V 26 Audio Stand

This Series features an open concept that compliments any room setting. Quality features include wood parts in a rich Black satin finish, and our high grade smooth edged safety glass. This series consists of a selection of Video Stands (26 to 64 ), with a matching Audio Stand and an extensive offering of complimentary tables and mirror accent pieces. Your theater room setting is now harmonious and complete. Superior Modern Styling. Quality wood construction in a rich Black satin finish. High quality clear or black safety glass shelves with polished edges. Matching Audio unit and tables and mirror. Easy assembly. Overall approx. size: 25 h x 26 w x 20 d. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for Brochure

Plateau SL-3V Video Stand

This Series features an open concept that compliments any room setting. Quality features include wood parts in a rich Black satin finish, and our high grade smooth edged safety glass. This series consists of a selection of Video Stands (26 to 64 ), with a matching Audio Stand and an extensive offering of complimentary tables and mirror accent pieces. Your theater room setting is now harmonious and complete. Superior Modern Styling. Quality wood construction in a rich Black satin finish. High quality clear or black safety glass shelves with polished edges. Matching Audio unit and tables and mirror. Easy assembly. Overall approx. size: 25 h x 50 w x 20 d. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for Brochure

Plateau SL-4A Audio Rack

This Series features an open concept that compliments any room setting. Quality features include wood parts in a rich Black satin finish, and our high grade smooth edged safety glass. This series consists of a selection of Video Stands (26 to 64 ), with a matching Audio Stand and an extensive offering of complimentary tables and mirror accent pieces. Your theater room setting is now harmonious and complete. Superior Modern Styling. Quality wood construction in a rich black satin finish. High quality clear or black safety glass shelves with polished edges. 4 Video unit sizes (26 - 64 ). Easy assembly. Matching Audio unit and tables and mirror. Overall approx. size: 35 h x 26 w x 20 d Ships directly from Plateau in 1-2 . Click for High-Res Picture #1 Click for High-Res Picture #2 Click for Brochure

Plateau SL-MIR Matching Mirror

This Series features an open concept that compliments any room setting. Quality features include wood parts in a rich Black satin finish, and our high grade smooth edged safety glass. This series consists of a selection of Video Stands (26 to 64 ), with a matching Audio Stand and an extensive offering of complimentary tables and mirror accent pieces. Your theatre room setting is now harmonious and complete. Superior Modern Styling. Quality wood construction in a rich Black satin finish. High quality safety glass shelves with polished edges. Matching Audio unit and tables and mirror. Easy assembly. Overall approx. size: 20 h x 44 w x 3/4 d. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for High-Res Image #4 Click for Brochure

Plateau SL-TCR Matching Coffee Table

This Series features an open concept that compliments any room setting. Quality features include wood parts in a rich Black satin finish, and our high grade smooth edged safety glass. This series consists of a selection of Video Stands (26 to 64 ), with a matching Audio Stand and an extensive offering of complimentary tables and mirror accent pieces. Your theater room setting is now harmonious and complete. Superior Modern Styling. Quality wood construction in a rich Black satin finish. High quality clear or black safety glass shelves with polished edges. Easy assembly. Overall approx. size: 15 h x 50 w x 15 d. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for Brochure

Plateau SL-TCS Matching Table

This Series features an open concept that compliments any room setting. Quality features include wood parts in a rich Black satin finish, and our high grade smooth edged safety glass. This series consists of a selection of Video Stands (26 to 64 ), with a matching Audio Stand and an extensive offering of complimentary tables and mirror accent pieces. Your theatre room setting is now harmonious and complete. Superior Modern Styling. Quality wood construction in a rich Black satin finish. High quality clear or black safety glass shelves with polished edges. Easy assembly. Overall approx. size: 15 h x 35 w x 35 d. Ships directly from Plateau in 1-2 business day. Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for Brochure

Plateau SL-TE Matching End Table

This Series features an open concept that compliments any room setting. Quality features include wood parts in a rich Black satin finish, and our high grade smooth edged safety glass. This series consists of a selection of Video Stands (26 to 64 ), with a matching Audio Stand and an extensive offering of complimentary tables and mirror accent pieces. Your theater room setting is now harmonious and complete. Superior Modern Styling. Quality wood construction in a rich Black satin finish. High quality clear or black safety glass shelves with polished edges. Easy assembly. Overall approx. size: 19 h x 19 w x 19 d. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for Brochure

Plateau SL-THS Matching Table

This Series features an open concept that compliments any room setting. Quality features include wood parts in a rich Black satin finish, and our high grade smooth edged safety glass. This series consists of a selection of Video Stands (26 to 64 ), with a matching Audio Stand and an extensive offering of complimentary tables and mirror accent pieces. Your theater room setting is now harmonious and complete. Superior Modern Styling. Quality wood construction in a rich Black satin finish. High quality clear or black safety glass shelves with polished edges. Easy assembly. Overall approx. size: 28 h x 54 w x 16 d. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for High-Res Image #4 Click for Brochure

Plateau SR-V-65 Video Stand - Black

When we set out to create the SR Series our design brief was simple: Design the most visually striking, technically superior credenza on the market today. Create a design that will command your attention when you see it in any home environment. When you look at the SR series... we have succeeded. The SR Series features premier woods, tasteful grains and classic colors. Available in Espresso (E) and Cherry (C) finishes, the SR series can be purchased in 65 or 75 models, and with its extra wide center area space, it will accommodate a full spectrum of audio/video product sizes and center-channels (the 75 model center space is 33.0 (838mm) wide). Each SR model provides ample ventilation for your valuable audio/video equipment, complete with cleverly positioned gateways to ensure unsightly cables are conveniently tucked away. Soft touch sliding aluminium doors and glass shelves incorporate high grade smooth edged safety glass. If you demand the best and appreciate design excellence for your audio/video system, then the SR series is a must. Superior Modern Styling using real Cherry and Oak (offered in an Espresso finish). Same price for any finish. Cable management to hide wires and cables. High quality safety glass doors and middle shelf with polished edges. Easy assembly. High quality metal door knobs. Overall approx. size: 19 h x 65 w x 22 d. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for Brochure

Plateau SR-V-65 Video Stand - Cherry

Plateau SR-V-65 Video Stand - Espresso

Plateau SR-V-75 Video Stand - Cherry

When we set out to create the SR Series our design brief was simple: Design the most visually striking, technically superior credenza on the market today. Create a design that will command your attention when you see it in any home environment. When you look at the SR series... we have succeeded. The SR Series features premier woods, tasteful grains and classic colors. Available in Espresso (E) and Cherry (C) finishes, the SR series can be purchased in 65 or 75 models, and with its extra wide center area space, it will accommodate a full spectrum of audio/video product sizes and center-channels (the 75 model center space is 33.0 (838mm) wide). Each SR model provides ample ventilation for your valuable audio/video equipment, complete with cleverly positioned gateways to ensure unsightly cables are conveniently tucked away. Soft touch sliding aluminium doors and glass shelves incorporate high grade smooth edged safety glass. If you demand the best and appreciate design excellence for your audio/video system, then the SR series is a must. Superior Modern Styling using real Cherry and Oak (offered in an Espresso finish). Same price for any finish. Cable management to hide wires and cables. High quality safety glass doors and middle shelf with polished edges. Easy assembly. High quality metal door knobs. Overall approx. size: 19 h x 75 w x 22 d. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for Brochure

Plateau SR-V-75 Video Stand - Black

When we set out to create the SR Series our design brief was simple: Design the most visually striking, technically superior credenza on the market today. Create a design that will command your attention when you see it in any home environment. When you look at the SR series... we have succeeded. The SR Series features premier woods, tasteful grains and classic colors. Available in Espresso (E) and Cherry (C) finishes, the SR series can be purchased in 65 or 75 models, and with its extra wide center area space, it will accommodate a full spectrum of audio/video product sizes and center-channels (the 75 model center space is 33.0 (838mm) wide). Each SR model provides ample ventilation for your valuable audio/video equipment, complete with cleverly positioned gateways to ensure unsightly cables are conveniently tucked away. Soft touch sliding aluminium doors and glass shelves incorporate high grade smooth edged safety glass. If you demand the best and appreciate design excellence for your audio/video system, then the SR series is a must. Superior Modern Styling using real Cherry and Oak (offered in an Espresso finish). Same price for any finish. Cable management to hide wires and cables. High quality safety glass doors and middle shelf with polished edges. Easy assembly. High quality metal door knobs. Overall approx. size: 19 h x 75 w x 22 d. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for Brochure

Plateau SR-V-75 Video Stand - Espresso

When we set out to create the SR Series our design brief was simple: Design the most visually striking, technically superior credenza on the market today. Create a design that will command your attention when you see it in any home environment. When you look at the SR series... we have succeeded. The SR Series features premier woods, tasteful grains and classic colors. Available in Espresso (E) and Cherry (C) finishes, the SR series can be purchased in 65 or 75 models, and with its extra wide center area space, it will accommodate a full spectrum of audio/video product sizes and center-channels (the 75 model center space is 33.0 (838mm) wide). Each SR model provides ample ventilation for your valuable audio/video equipment, complete with cleverly positioned gateways to ensure unsightly cables are conveniently tucked away. Soft touch sliding aluminium doors and glass shelves incorporate high grade smooth edged safety glass. If you demand the best and appreciate design excellence for your audio/video system, then the SR series is a must. Superior Modern Styling using real Cherry and Oak (offered in an Espresso finish). Same price for any finish. Cable management to hide wires and cables. High quality safety glass doors and middle shelf with polished edges. Easy assembly. High quality metal door knobs. Overall approx. size: 19 h x 75 w x 22 d. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for Brochure

Plateau ST-23 Speaker Stands - Pair

Elegant yet modern and dynamic, the ST Series is designed to be a natural complement to our audio/video stands. The contoured upright centers are composed of extruded aluminum and is available in a Black baked powder-coated finish. Curved and rounded bases are available in a natural Black Oak wood. The centers and steel tops are finished in a virtually indestructible Black, baked powder-coat finish. Also available is a matching ST-CC-17 center-channel speaker stand. PLATEAU stands can be filled with lead shot or sand to increase stability and reduce annoying sound distortion. If you could see sound, you would see why quality designed speaker stands are important. Speaker stands dramatically improve the acoustic performance of your speakers. Heavy gauge steel and aluminum centers. Tops and centers available in Black baked powder-coat finish. Superior Modern Styling using real Oak. Wire management. Overall approx. height: 23 Ships directly from Plateau in 1-2 . Click for High-Res Picture #1 Click for High-Res Picture #2 Click for Brochure

Plateau Valencia 5187 Video Cabinet - Walnut

The VALENCIA 5187 is a conversation piece: A luxurious unit that accommodates a variable width range of 51 to 87 (1300mm to 2210mm). Designed to be versatile and visually pleasing, the unit can be adjusted to your exact TV requirement. No guesswork here. Detailed features include back panels that offer ample ventilation and cable management, and precision quality hinges. Plenty of storage space and more if you choose - simply expand the model by easily gliding the sides out to add another beautiful feature (up to 18 (455mm)). Includes two 17.5 wide (447mm) top spacers. This Series is designed to stand out from the rest. Available in a natural wood Black Oak (B) or Walnut (W), this unit is shipped fully assembled. Superior Modern Styling with real woods (Black Oak or Walnut finish). Expandable (51 - 87 ). Includes (2) 17.5 wide top wood spacers. Premium hinges. Shipped built (no assembly required). Overall approx. size: 22 h x 51 - 87 w x 21 d. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for High-Res Image #4 Click for High-Res Image #5 Click for High-Res Image #6 Click for High-Res Image #7 Click for High-Res Image #8 Click for High-Res Image #9 Click for High-Res Image #10 Click for High-Res Image #11 Click for High-Res Image #12 Click for Brochure

Plateau Valencia 5187 Video Cabinet - Black

Plateau Valencia 79 Video Cabinet - Walnut

The VALENCIA Series 79 is designed to stand out from the rest. This unit is constructed with the finest materials, offering functional dimensions for your audio/visual components. Detailed features include back panels that offer ample ventilation and cable management, and precision quality hinges. We’ve also incorporated a back-light - for added ambiance. The middle section is 33 (841mm) wide, to accommodate most center-channels. Optional grill door available. The unique and quality precision construction makes this Series the perfect compliment to any room setting. Available in a natural Black Oak (B) or Walnut (W), this unit is shipped fully assembled. Superior Modern Styling with real woods (Black Oak or Walnut finish). Back-light. Premium hinges. Shipped built (no assembly required). Overall approx. size: 22 h x 79 w x 25 d. Top surface 13 h. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for High-Res Image #4 Click for High-Res Image #5 Click for High-Res Image #6 Click for High-Res Image #7 Click for High-Res Image #8 Click for Brochure

Plateau Valencia 79 Video Cabinet - Black

Plateau XT-A4 Audio Rack

The XT Series has been built for the serious connoisseur who recognizes the importance of bringing an aesthetic touch and grand functionality to a room. The XT Series design makes it possible to turn all of your audio/video components into the Ultimate Furniture Design System. Curved and shaped 3/4 ( 19mm) shelves that are available in a natural Black Oak (B) wood. Strong heavy gauge 2 x 2 (51mm x 51mm) steel tubes create a rack system that is extremely strong and rigid. All metal work is finished in a virtually indestructible textured Black, baked powder-coat finish. This priceless gem is a beautiful and magnificent combination of strength, style and versatility. It’s a must for those who only accept the best. Superior Modern Styling using real Oak. Black baked powder-coat finish. Heavy gauge steel tube assembly. Modular / Expandable. Easy assembly. Overall approx. size: 31 h x 26 w x 19 d Distance between shelves: 8 3/4 Ships directly from Plateau in 1-2 . Click for High-Res Picture Click for Brochure

Plateau XT-AA1 Add-On Shelf for XT-A4

The XT Series has been built for the serious connoisseur who recognizes the importance of bringing an aesthetic touch and grand functionality to a room. The XT Series design makes it possible to turn all of your audio/video components into the Ultimate Furniture Design System. Curved and shaped 3/4 (19mm) shelves that are available in a natural Black Oak (B) wood. Strong heavy gauge 2 x 2 (51mm x 51mm) steel tubes create a rack system that is extremely strong and rigid. All metal work is finished in a virtually indestructible textured Black, baked powder-coat finish. This priceless gem is a beautiful and magnificent combination of strength, style and versatility. It’s a must for those who only accept the best. Superior Modern Styling using real Oak. Black baked powder-coat finish. Heavy gauge steel tube assembly. Modular / Expandable. Easy assembly. Ships directly from Plateau in 1-2 . Click for High-Res Picture Click for Brochure

Plateau XT-V3 Video Rack

The XT Series has been built for the serious connoisseur who recognizes the importance of bringing an aesthetic touch and grand functionality to a room. The XT Series design makes it possible to turn all of your audio/video components into the Ultimate Furniture Design System. The XT - Video Series is designed for the current generation video monitors. The XT-V3 (44) can handle even the heaviest and highest end video equipment. Curved and shaped 3/4 (19mm) shelves that are available in a natural Black Oak (B) wood. Strong heavy gauge 2 x 2 (51mm x 51mm) steel tubes create a rack system that is extremely strong and rigid. All metal work is finished in a virtually indestructible textured Black, baked powder-coat finish. This priceless gem is a beautiful and magnificent combination of strength, style and versatility. It’s a must for those who only accept the best. Superior Modern Styling using real Oak. Black baked powder-coat finish. Option to assemble with / without mid-shelf center tube. Heavy gauge steel tube assembly. Modular / Expandable. Easy assembly. Overall approx. size: 22 h x 43 w x 19 d. Ships directly from Plateau in 1-2 . Click for High-Res Image #1 Click for High-Res Image #2 Click for High-Res Image #3 Click for High-Res Image #4 Click for High-Res Image #5 Click for High-Res Image #6 Click for Brochure

Plateau Z-5A Audio Rack

This Series of audio racks contains scratch-resistant shelves with welded heavy gauge steel tube construction to produce a superbly crafted unit. All metal work is covered in a virtually indestructible textured Black, baked powder-coat finish (as are all PLATEAU products). With resonance reducing open architecture, further elimination of resonance and vibration can be achieved by filling the base and side frames with lead shot or sand. This precision piece of technology is designed to stand the test of time. Available in a natural Black Oak wood. Superior Modern Styling using real Oak. Cable management to hide wires and cables. Strong heavy gauge steel tube construction. Overall approx. size: 36 h x 21 w x 17 d. Ships directly from Plateau in 1-2 . Click for High-Res Picture Click for Brochure

PS Audio Digital Link III DAC Digital Audio Converter

Converts just about any digital audio signal, including PC. Quit using your PC's cheap sound card. If you want to enjoy music from a digital source, like a CD, DVD player or computer, you need to first convert it from digital information to analog information. That is the function of the digital to analog converter, or DAC for short. DAC’s are the cornerstone of all modern digital equipment. Many CD players and DVD players have built in DAC’s, but these are rarely as good as the best outboard DAC’s. It displays a sweetness and warmth which consistently locks into the heart of a musical performance. So writes Ian Harris in Hi Fi Plus’s review of this incredible sounding DAC. The DLIII is an award winning D to A converter that accepts inputs from any digital source including a computer through USB. The Digital Link III is the best sounding DAC we have ever produced in our 21 years of producing D to A converters. Sweet, open spacious and a joy to listen to, this device will bring the life back into your music. Connect to any CD or DVD player’s output or connect to your computer. The DLIII will decode any stereo SPDIF output stream with 24 bit precision. Use the DLIII to improve the performance of any CD player, transport or media device like a Sonos, Squeezebox, Apple TV or I-transport. Connect any computer to it through USB as well. Read a Review Specifications: Stereo D to A converter Optical input Coaxial input USB input 24 bit DAC Front panel select 192kHz XLR and RCA outputs 192kHz upsample circuitry 8 times oversampling filter Single stage IV converter Discrete FET output stage Plays just about anything Upsamples 44kHz to 192kHz CD, DVD player or computer Warmest sound DAC ever Subterranean bass response Sweet open top end Fully balanced Low noise .

PS Audio GCPH Phono Stage

Moving Coil/Moving Magnet Front panel gain adjust Mono/Stereo Dual mono signal path Balanced input to output Phase reversal Passive RIAA Curve Impedance matching Huge power supply Gain Cell technology Built in subsonic filter RIAA accuracy better than 1/10th dB No better phono stage ever made Accurate and musical Low noise Balanced input to output Match your cartridge to the gain Use as a standalone phono preamp Direct into a power amp or preamp .

PS Audio Noise Harvester

The PS Audio Noise Harvester converts line noise to light, works at frequencies 10 times lower than any filter, dramatically lowers the noise source, works throughout the home, and can be used with existing power conditioners. Multiple Noise Harvesters can work in parallel. Lower line noise Removes noise not covered by power conditioners Cleaner background for audio Improved picture for video Permanently removes line noise Multiple Harvesters work in parallel for greater performance Improves performance of any associated power conditioner Black - ..

PS Audio Perfect Wave AC-10 Power Cables

The second best power cable we make. The PerfectWave AC-10 sets a new standard for high-end aftermarket power cables. 10 gauge, PCOCC single crystal, quad shielding, multiple gauge and shaped conductors, solid machined connectors. Perfect AC power is a critical requirement for high-performance audio/video systems. Delivering that power to your equipment, without loss, is the job of the AC power cable. The low noise, high-speed design of the AC-10 is based on 5 patents and years of listening and engineering. The PerfectWave series brings a new level of refined beauty, power and spacious performance to high-end, high-performance systems. It helps connected equipment enjoy a breathtaking openness, with quick transients combined with a warmth and richness that we have never before experienced. Select Length Option Below 1.0 Meter - . Other Lengths -

PS Audio Perfect Wave AC-12 Power Cables

Our finest power cable we make. The PerfectWave AC-12 sets a new standard for high-end aftermarket power cables at any price. 8 gauge, PCOCC single crystal, quad shielding, multiple gauge and shaped conductors, solid machined connectors. Perfect AC power is a critical requirement for high-performance audio/video systems. Delivering that power to your equipment, without loss, is the job of the AC power cable. The low noise, high-speed design of the AC-12 is based on 5 patents and years of listening and engineering. The PerfectWave series brings a new level of refined beauty, power and spacious performance to high-end, high-performance systems. It helps connected equipment enjoy a breathtaking openness, with quick transients combined with a warmth and richness that we have never before experienced. Select Length Option Below

PS Audio Perfect Wave AC-3 Power Cables

The PerfectWave AC-3 is the most affordable power cable we make in the series. 12 gauge, OFC pure copper, multiple shields, multiple gauge geometry, machined connectors. The best value in a high-end power cable we make. The PerfectWave AC-3 sets a new standard for affordable aftermarket power cables. 12 gauge, double shielding, multiple gauge and shaped conductors, solid machined connectors. Perfect AC power is a critical requirement for high-performance audio/video systems. Delivering that power to your equipment, without loss, is the job of the AC power cable. The low noise, high-speed design of the AC-3 is based on 5 patents and years of listening and engineering. The PerfectWave series brings a new level of refined beauty, power and spacious performance to high-end, high-performance systems. It helps connected equipment enjoy a breathtaking openness, with quick transients combined with a warmth and richness that we have never before experienced. Select Length Option Below

PS Audio Perfect Wave AC-5 Power Cables

The best value in a high-end power cable we make. The PerfectWave AC-5 sets a new standard for aftermarket power cables. 10 gauge, double shielding, multiple gauge and shaped conductors, solid machined connectors. Perfect AC power is a critical requirement for high-performance audio/video systems. Delivering that power to your equipment, without loss, is the job of the AC power cable. The low noise, high-speed design of the AC-5 is based on 5 patents and years of listening and engineering. The PerfectWave series brings a new level of refined beauty, power and spacious performance to high-end, high-performance systems. It helps connected equipment enjoy a breathtaking openness, with quick transients combined with a warmth and richness that we have never before experienced. Select Length Option Below

PS Audio Perfect Wave Jewel IEC Power Cables

Our most affordable entry level AC power cord is perfect for any source equipment, digital products and small to medium power amplifiers that uses the more standard three prong detachable IEC power connector found on most high-end equipment. PS AC power cables are unequaled from a construction quality and performance standpoint. The Power Jewel allows anyone to replace their stock power cables and make an immediate noticeable improvement. If your detachable power cable uses the smaller shaver plug C7 style connector, choose the Jewel C7 instead. Select Length and Connector Options Below Features: Connectors machined from solid billet Braid shielded IEC connector Nickel plated and polished Hermetically sealed connectors Removable ground pin 12 Gauge multistrand Hot and cold welded connections Benefits Perfect for source equipment Shielded power Lowers noise floor Helps eliminate ground loops Improves performance of anything connected

PS Audio Perfect Wave Jewel C7 Power Cables

PS Audio Perfect Wave Transport

PS Audio’s ground breaking PerfectWave Transport (PWT) Memory Player stands alone as the ultimate optical disc player ever made. Built from the ground up as a dedicated high-end CD and DVD audio transport, the PWT will read almost any optical disc and output near-perfect digital data to any D to A processor made. The PWT is designed to be the last optical disc player you will ever need. Future-proof and field upgradable, the PWT can read high resolution WAV files or standard resolution CD audio files directly and feed the perfected data to your DAC through standard AESEBU, SPDIF or PS Audio’s exclusive I2S through HDMI connection for unprecedented performance. Cover art, song titles, track times, sample rates and bit depth are all displayed on the beautiful color touch screen automatically for any inserted disc. Includes remote. Features Reads audio from CD and DVD Reads high resolution audio files Reads multiple formats Displays cover art Displays song titles and track time Editable library of artists and titles Bit perfect extraction No error correction Memory player 64mB of RAM Built in Digital Lens Asynchronous output clock Extremely low jitter Outputs SPDIF and AESEBU Outputs I2S through HDMI Sample rate output to 192kHz Bit depth to 32 bits Field upgradable Built on dedicated hardware 440,000 gate FPGA No computer motherboards or components Benefits No need for a computer in your system Take advantage of all the new hi res music Create your own disc compilations Easy access to all music by name Always perfect cover art No more disc errors Never listen to optical mechanism again Unprecedented performance Compatible with any DAC Perfect connection with PWD Future proof for all sample rates New formats added as developed Quiet, noise free operation SoundStage Review Another SoundStage Review Stereophile Review Watch Video

PS Audio PerfectWave DAC MK II Digital Audio Converter

The PerfectWave DAC will change the way you think about digital to analog converters forever. It accesses high-resolution digital audio data from multiple sources such as a CD transport, CD player, computer, network, or the Internet and converts the data to the most musically natural sounding analog audio ever produced. The PWD is the first high-end product to fully transcend the limitations of traditional digital to analog converters by providing uncompromised performance for any media delivery or storage system possible. This means that it no longer matters how the digital audio data is stored or delivered, the PWD produces the same high performance audio sent over a network, taken from a hard drive, a CD or even downloaded via the Internet. As a music server, the PWD can access and control any compatible network source such as a network hard drive (NAS), or stream music directly off the Internet. More Info .

PS Audio Power Plant 5

The second largest of our AC power regenerators, the P5 produces pure and perfect AC and is the power source of choice for almost any size system.

PS Audio Power Plant 10

The largest and most advanced high-end AC power regenerator on the planet, the P10 is pure state of the art. Capable of powering any size system with pure sine wave power, nothing comes even close to a P10.

PS Audio Rack Mount Kit

The PS Audio Rackmount Kit is designed to attach the PS Audio Quintet, Duet, Juicebar, or Humbuster III to the back of an AV rack, cabinet, or directly to the wall. .

Rockustics APSS-1 Outdoor Speaker System

Weathered surface sedimentary rock aesthetic. The Rockustics APSS-1 Outdoor Speaker System includes one 8" Pavasubbi subwoofer and two Punkrock, 5.25" satellite speakers. Satellite speakers reproduce audio band pass over 100 hz to compliment subwoofers high output low frequency performance. Recommended for small patios or gardens. 8 ohm impedance per coil.

Rockustics APSS-2 Outdoor Speaker System

Weathered surface sedimentary rock aesthetic. The Rockustics APSS-2 Outdoor Speaker System includes one 8", Punksub subwoofer and two Econorock, 6.25" satellite speakers. Satellite speakers reproduce audio band pass over 100 hz to compliment subwoofers high output low frequency performance. Recommended for small patios or gardens. 8 ohm impedance per coil.

Rockustics BP Sub Jr. Outdoor Subwoofer - Each

Weathered granite with subtle tones and above-ground design, the BP JR. Sub is capable of delivering a whopping 350 watts and is designed for the large outdoor areas requiring high-end sound. One 10" woofer, 4 ohm impedance. Non-powered, electronic crossover required. Dimensions: 24.5" X 20" X 15". Weight: 180 lbs.

Rockustics CocoNutz Outdoor Speakers - Each

The Rockustics CocoNutz have the look and feel of the real thing and are designed to be mounted in trees in the listening area. Add an exotic, tropical feel to your patio or garden with these 2-way, 75-watt speakers. None: CocoNutz does not come with foliage.

Rockustics COM360 Outdoor Speakers - Each

Smooth, granite finish adds to contemporary look of this 2-way, 100 watt speaker. The Rockustics COM360 has excellent bass response and coverage makes this unit ideal for applications requiring omni-directional sound. 8" woofer, 1" tweeter, 5 ohm impedance. Dimensions: 20" X 17". Weight: 50 lbs.

Rockustics Cub Sub Outdoor Subwoofer

A smaller version of the popular WhereWoof. Two 10" woofers, 4 ohm impedance. Sustained 300 watt input, 4th order band pass.

Rockustics EconoRock Outdoor Speakers - Each

With a porous and weathered sedimentary rock design, this 2-way, 70 watt speaker is ideal for small to medium sized areas. 6.5" coaxial driver, 4 ohm impedance. Dimensions: 10.5" X 12.5" X 10.5". Weight: 15 lbs.

Rockustics Hillside Outdoor Speakers - Each

With a lava rock motif, the Rockustics Hill-Side is a 2-way speaker that delivers 200 watts of clear, dynamic sound with great volume potential for large open areas. Two 8" woofers, One 1" tweeter, 8 ohm impedance. Dimensions: 26" X 26" X 18". Weight: 85 lbs.

Rockustics OctoRock Outdoor Speakers - Each

The Rockustics Octo-Rock, with the weathered look of the rock commonly found in the Rocky Mountains, is a 2-way speaker that fits beautifully in larger backyards and pool areas, as well as other settings requiring more bass. 8" coaxial driver, 4 ohm impedance. Dimensions: 12.25" X 16" X 12.5". Weight: 32 lbs.

Rockustics OmniPlanter 5.25 Outdoor Speakers - Each

A large, circular floor planter with the look of terra cotta, The Rockustics Omni-Planter 5.25 delivers 360 degrees of dynamic sound and is designed to accommodate live plants and allow for drainage. Constructed of rotation-molded, UV stable polyethylene. 5.25" coaxial driver, 75 watt, 4 ohm impedance. Dimensions: 16" dia. X 14" H. Weight: 11 lbs.

Rockustics OmniPlanter 6.5 Outdoor Speakers - Each

The Rockustics OmniPlanter 6.5 is a large, circular floor planter with the look of terra cotta, delivers 360 degrees of dynamic sound and is designed to accommodate live plants and allow for drainage. Constructed of rotation-molded, UV stable polyethylene. 5.25" coaxial driver, 75 watt, 4 ohm impedance. Dimensions: 16" dia. X 14" H. Weight: 11 lbs.

Rockustics OmniPlanter 8 Outdoor Speakers - Each

The Rockustics Omni-Planter-8 is a large, circular floor planter with the look of terra cotta, delivers 360 degrees of dynamic sound and is designed to accommodate live plants and allow for drainage. Constructed of rotation-molded, UV stable polyethylene. 5.25" coaxial driver, 75 watt, 4 ohm impedance. Dimensions: 16" dia. X 14" H. Weight: 11 lbs.

Rockustics OmniPlanter 6.5 Sweetspot Stereo Outdoor Speaker - Each

The OmniPlanter 6.5 Sweetspot is a large, circular floor planter delivering 360 degrees (horizontal dispersion) of dynamic sound with SweetSpot system. Designed to accommodate live plants and allow for drainage. Constructed of rotation-molded, UV stable polyethylene. 6.5" coaxial driver, 70 watt, 4 ohm impedance. Dual voicecoil, dual tweeter. Dimensions: 20 dia. X 17 H. Weight:14 lbs

Rockustics OmniPlanter 8 Sweetspot Stereo Outdoor Speaker - Each

The Rockustics Omni-Planter 8 Sweetspot plays both left & right channels all in one speaker. Large, circular floor planter delivering 360° (horizontal dispersion)of dynamic sound with SweetSpot system. Designed to accommodate live plants and allow for drainage. Constructed of rotation-molded, UV stable polyethylene. 8" coaxial driver, 75 watt, 4 ohm impedance. Dual voicecoil, dual tweeter. Dimensions: 24" dia X 19" H. Weight: 20 lbs.

Rockustics Pavarocci Outdoor Speakers - Each

With the exotic look of weathered sedimentary rock, these 2-way Rockustics Pavarocci outdoor speakers are extremely versatile and suit areas ranging from large patios to small pool settings. 8" coaxial driver, 4 ohm impedance. Dimensions: 13.5" X 16" X 12.5". Weight: 24 lbs.

Rockustics Pavarocci SweetSpot Stereo Outdoor Speakers - Each

The Rockustics Pavarocci Sweetspot Stereo Outdoor Speaker features a dual voice coil. It is recommended for any outdoor area requiring stereo sound but only room for 1 speaker. Exotic look of weathered sedimentary rock in a 2-way, 70 watt speaker featuring the SweetSpot system. Extremely versatile speaker for use in large patios to small pool areas. 8" coaxial driver, 4 ohm impedance. Dual voicecoil, dual tweeter. Dimensions: 13.5" X 16" X 12.5". Weight: 24 lbs.

Rockustics Pavasubbi Outdoor Subwoofer - Each

The Rockustics Pavasubbi is a small package that packs a serious low-frequency punch. Features one 100 watt dual voice coil driver and a passive crossover with outputs for fullrange speakers. Exotic, weatherized sedimentary rock housing, best paired with Rockustics 5.25" speakers. 8 ohm impedance. Non-powered, electronic crossover required. Dimensions: 15" X 12" X 15". Weight: 55 lbs.

Rockustics Planter Outdoor Speakers - Each

The Rockustics Planter Outdoor Speaker is designed to accommodate live plants. This terra cotta floor planter features 2-way, 75-watt capabilities and is perfect for small-to-medium sized backyards, decks, porches and greenhouse areas. 5.25" coaxial driver, 4 ohm impedance. Dimensions: 27" X 12.25". Weight: 25 lbs.

Rockustics PunkRock Outdoor Speakers - Each

The Rockustics PunkRock Outdoor Speaker features river rock design, 2-way speaker that is perfect for backyards, hot tubs and patio areas. 5.25" coaxial driver, 4 ohm impedance. Performance: 76 Hz-19 kHz, 91 db. Dimensions: 9.5X10.5X8.25. Weight: 11 lbs.

Rockustics PunkSub Outdoor Subwoofer - Each

The Rockustics PunkSub is a sedimentary rock styled subwoofer that features 200 watt power capacity and a built in passive crossover system to provide bass reinforcement for satellite speaker systems. Two 8" woofers, 4 ohm impedance. Non-powered, crossover included. Dimensions: 22" X 12" X 16". Weight: 75 lbs.

Rockustics Rockolyth Outdoor Speakers - Each

The award-winning Rockustics Rockolyth outdoor speaker features subtle southwest-style petroglyphs. The ported granite cabinet hosts two 100-watt drivers and one dome tweeter to provide the utmost in high-fidelity sound for large indoor or outdoor settings. Winner of Audio-Video Interiors' "Excellence in Design" award. 8 ohm impedance. Dimensions: 18" X 22" X 40". Weight: 150 lbs.

Rockustics Rocky III Outdoor Speakers - Each

Featuring granite texture with stylized grill, the Rockustics Rocky III is a 2-way speaker that works best in small to medium backyards, hot tub and patio areas that require close-in sound. Open grille design is suited for placement in dense plants and shrubs. 6.5" coaxial driver, 4 ohm impedance. Dimensions: 12.5" X 12.5" X 10.5". Weight: 14 lbs.

Rockustics Rocky Jr Outdoor Speakers - Each

The Rockustics Rocky Jr with the look of volcanic lava rock, this 2-way speaker emits sound over a 100-150 foot distribution radius and is exceptional for the largest outdoor areas. 6.5" woofer, 1" tweeter, 8 ohm impedance. Dimensions: 10.5" X 20" X 16". Weight: 34 lbs.

Rockustics Rocky Too Outdoor Speakers - Each

The layered and weathered shale tone of Rocky Too is the perfect compliment to any outdoor setting. This 2-way speaker accommodates the needs of medium-sized yards, large pool and patio areas and commercial environments. 6.5" coaxial driver, 4 ohm impedance. Dimensions: 12" X 21.75" X 11.5". Weight: 31 lbs.

Rockustics Rocquette Outdoor Speakers - Each

Layered and weathered shale, the 2-way 70 watts of inconspicuous sound from the Rockustics Rocquette will provide the finishing touch to small-to-medium sized backyards, pools, patios and gardens. 6.5" coaxial driver, 4 ohm impedance. Dimensions: 11" X 15.5" X 9". Weight: 16 lbs.

Rockustics Rocquette Sweetspot Stereo Outdoor Speakers - Each

Rockustics Rocquette Sweetspot plays both left and right audio channels all in one speaker. Resembling layered and weathered shale, this 2-way, 70 watt speaker features the SweetSpot system. Ideal for small to medium sized backyards, pools, patios and gardens. 6.5" coaxial driver, 4 ohm impedance. Dual voicecoil, dual tweeter. Dimensions: 11" X 15.5" X 9". Weight: 16 lbs.

Rockustics SoundStone Outdoor Speakers - Each

The Rockustics SoundStone features an earthy, shale tone accentuates this 2-way speaker that fits perfectly into medium-to-large pool and patio areas. 6.5" coaxial driver, 4 ohm impedance. Dimensions: 11.5" X 14.5" X 11.75". Weight: 27 lbs.

Rockustics StoneHenge II Outdoor Speakers - Each

The cornerstone of the Rockustics line, Stonehenge II combines a special, hand-finished mineral dye process with a flawless granite exterior provide a natural look. 2-way, 150 watt speaker that sets the industry standard for large residential and commercial applications. 8" woofer, 1" tweeter, 4 ohm impedance. Dimensions: 14.5" X 17.25" X 17.75". Weight: 45 lbs.

Rockustics SurroundStone Outdoor Speakers - Each

The Rockustics SurroundStone offers omni-directional sound from a 2-way, 75 watt speaker. Inconspicuous and ideal for placement in flower and plant beds. 5.25" coaxial driver, 4 ohm impedance. Dimensions: 15" X 15" X 12.5". Weight: 40 lbs.

Rockustics TuneStone Outdoor Speakers - Each

Featuring the elegant look of granite, the Rockustics TuneStone 2-way speaker is well suited for most small-to-medium sized backyards, garden and pool areas. Open grille design well suited for placement among dense plants or shrubs. 8" coaxial driver, 4 ohm impedance. Dimensions: 11.5" X 15.5" X 14.5". Weight: 28 lbs.

Rockustics WhereWoof Outdoor Subwoofer - Each

WhereWoof is the worlds largest purpose built outdoor subwoofer for the residential market. The WhereWoof features a dual chambered band pass design boasting 2-dual VC 15" specially designed long throw drivers and a 13 ply weatherproof birch enclosure, housed in a custom molded rock enclosure. 8 ohm impedance per coil. Non-powered, electronic crossover required. Dimensions: 64" X 40" X 37". Weight: 310 lbs.

Smartwire 14 Gauge 2 Conductor Speaker Wire - Spool

2 Conductor Home Theater SmartWire UL Listed and Rated Type CL3 or CM Multi-Conductor Non-Shielded Home Theater and Audio Speaker Cable P/N 81402105 - 14 AWG 2 Conductor Non-Shielded Non-Plenum Home Theater Speaker Cable CABLE SPECIFICATIONS Description 14 AWG 2 Conductor Bare Copper, Non-Shielded Non-Plenum Home Theater UL Type CL3 or CM Conductor Description 14 (105/34 Bare Copper) Insulation PVC .013 Nom. Color Code Black/Red Jacket PVC .020 Nom. Marking HOME THEATER/MULTI-ROOM AUDIO CABLE L C R LS RS LR RR ROOM A B C D E 0 1 2 3 4 5 6 7 8 9 14AWG 2C (UL) CL3 OR C(UL)US (AUDIO ONLY) 75 C DIR BUR ROHS Overall Diameter .230 Nom. Conductor DCR N/A Capacitance N/A Impedance N/A Temperature and Voltage Rating 75 C / 300 Volt Cable Weight 43 Lbs/Mft. Agencies Approvals: UL 13 and 444, UL Listed Type CL3 or CM, C(UL), RoHS Compliant Sold in 500 ft. Pull Box or 250 Ft. or 100 Ft. Spools - Choose Below

Smartwire 14 Gauge 4 Conductor Speaker Wire - Spool

A/V Audio Video SmartWire UL Listed and Rated Type CL3 or CM Multi-Conductor Non-Shielded Home Theater Cable P/N 8140441 - 14 AWG 4 Conductor Non-Shielded Non-Plenum Home Theater and Audio Speaker Cable CABLE SPECIFICATIONS Description 14 AWG 4 Conductor Bare Copper, Non-Shielded Non-Plenum Home Theater UL Type CL3 or CM Conductor Description 14 (41/30 Bare Copper) Insulation PVC .013 Nom. Color Code Black/Red/White/Green Jacket PVC .020 Nom. Marking HOME THEATER/MULTI-ROOM AUDIO CABLE L C R LS RS LR RR ROOM A B C D E 0 1 2 3 4 5 6 7 8 9 14AWG 4C (UL) CL3 OR CM C(UL)US (AUDIO ONLY) 75 C DIR BUR ROHS Overall Diameter .290 Nom. Conductor DCR N/A Capacitance N/A Impedance N/A Temperature and Voltage Rating 75 C / 300 Volt Cable Weight 71 Lbs/Mft. Agencies Approvals: UL 13 and 444, UL Listed Type CL3 or CM, C(UL), RoHS Compliant Sold in 500 ft. Pull Box and 250 Ft. or 100 Ft. Spools - Choose Below

Smartwire 16 Gauge 2 Conductor Speaker Wire - Spool

2 Conductor Home Theater SmartWire UL Listed and Rated Type CL3 or CM Multi-Conductor Non-Shielded Home Theater and Audio Cable P/N 8160265 - 16 AWG 2 Conductor Non-Plenum Home Theater Speaker Cable CABLE SPECIFICATIONS Description 16 AWG 2 Conductor Bare Copper, Non-Plenum Home Theater UL Type CL3 or CM, C(UL) Conductor Description 16 (65/34 Bare Copper) Insulation PVC .012 Nom. Color Code Black/Red Jacket PVC .029 Nom. Marking HOME THEATER/MULTI-ROOM AUDIO CABLE L C R LS RS LR RR ROOM A B C D E 0 1 2 3 4 5 6 7 8 9 16 AWG OFC 2C (UL) TYPE CL3 DIR BUR OR CM C(UL)US 75 C ROHS Overall Diameter .188 Nom. Conductor DCR N/A Capacitance N/A Impedance N/A Temperature and Voltage Rating 75 C / 300 Volt Cable Weight 32 Lbs/Mft. Agencies Approvals: UL 13 and 444, UL Listed Type CL3 or CM, C(UL), RoHS Compliant Sold in 500 ft. Pull Box and 250 Ft. and 100 Ft. Spools - Choose Below

Smartwire 16 Gauge 4 Conductor Speaker Wire

A/V Audio Video SmartWire UL Listed and Rated Type CL3 or CM Multi-Conductor Non-Shielded Home Theater Cable P/N 8160465 - 16 AWG 4 Conductor Non-Shielded Non-Plenum Home Theater Speaker Cable CABLE SPECIFICATIONS Description 16 AWG 4 Conductor Bare Copper, Non-Shielded Non-Plenum Home Theater UL Type CL3 or CM Conductor Description 16 (65/34 Bare Copper) Insulation PVC .012 Nom. Color Code Black/Red/White/Green Jacket PVC .020 Nom. Marking HOME THEATER/MULTI-ROOM AUDIO CABLE L C R LS RS LR RR ROOM A B C D E 0 1 2 3 4 5 6 7 8 9 16AWG 4C (UL) CL3 OR CM C(UL)US 75 C DIR BUR ROHS Overall Diameter .250 Nom. Conductor DCR N/A Capacitance N/A Impedance N/A Temperature and Voltage Rating 75 C / 300 Volt Cable Weight 47 Lbs/Mft. Agencies Approvals: UL 13 and 444, UL Listed Type CL3 or CM, C(UL), RoHS Compliant Sold in 500 ft. Pull Box and 250 Ft. or 100 Ft. Spools - Choose Below

Smartwire 16-4 With Cat5e Combo Cable - Spool

A/V Audio Video SmartWire UL Listed and Rated Type CL3 or CM and Cat5E Combo Cable containing: 1 - 16-04 UNS STR Audio Cable and 1 - Cat 5E PVC P/N 81604CAT5E - 16 AWG 4 Conductor and 24 AWG 4 Pair Category 5E 350 mhz Non-Plenum Home Theater and Audio Cable w/ Data/Control CABLE SPECIFICATIONS Description 16 AWG 4 Conductor Bare Copper, Non-Plenum Home Theater UL Type CL3/CM with 24 AWG 4 Pair Bare Copper, Non-Plenum Category 5E 350 mhz Conductor Description 16 (65/34 Bare Copper); 24 (Solid Bare Copper) Insulation 16 AWG: PVC .012 ; 24 AWG: PE .006 Color Code 16 AWG: Black/Red/White/Green; 24 AWG: White-Blue/Blue, White-Orange/Orange, White-Green/Green, White-Brown/Brown Jacket PVC; .029 Nom. Marking KEYPAD/VOLUME CONTROL ROOM A B C D E 0 1 2 3 4 5 6 7 8 9 16AWG OFC 4C and 24AWG 4PR CAT5E CL3 (UL) OR CM C(UL)US 75 C ROHS Overall Diameter Outer Jacket: .353 Nom. Conductor DCR N/A Capacitance N/A Impedance N/A Temperature and Voltage Rating 75 C / 300 Volt Cable Weight 80 Lbs/Mft. Agencies Approvals: UL 13 and 444, UL Listed Type CL3 or CM, RoHS Compliant Sold in 500 ft. Pull Box or 100 ft. or 250 ft. Spool - Choose Below

Smartwire Category 5e Data Cable - Spool

UL Listed and Rated Type CMG or CMR, ETL Verified Non-Plenum Category 5e Cable P/N 8665610 - 24 AWG 4 Pair Category 5e UTP Non-Plenum Cable CABLE SPECIFICATIONS Description 24 AWG Category 5e Unshielded Twisted Pair (UTP) Cable For Data Transmission up to 350MHz. This Cable is Non-Plenum Rated and Verified to Category 5e Electricals Conductor Description 24 AWG Solid Bare Copper Insulation PE Color Code Pair 1: White-Blue/Blue, Pair 2: White-Orange/Orange, Pair 3: White-Green/Green, Pair 4: White-Brown/Brown Jacket PVC; OD: .205 Nom. Marking A B C D E 0 1 2 3 4 5 6 7 8 9 4PR CAT 5E ENHANCED (ETL) OR C(ETL) 24 AWG 350 MHZ CMR VERIFIED TO TIA/EIA 568B.2 WINDY CITY WIRE Performance Data Max. Conductor DCR 9.38 Ohms/100m (28.6 Ohms/kft) Max. Max. Mutual Capacitance 17 pF/ft. Characteristic Impedance 100 Ohms +- 15% Velocity of Propagation 66% Nom. Max. DCR 9.38 Ohms/100m (28.6 Ohms/kft) Max. Max. Propagation Delay 35 ns/100m Max. Voltage 300 Volts Agencies Approvals: Type CMG/CMR Communication Cable, C(ETL), ETL Verified to TIA/EIA 568B.2 Sold in 500 or 1000 ft. Pull Box - Choose Below

Smartwire RG-6 Quad Shielded Coaxial Cable - Spool

UL Listed and Rated Type CMR Type RG 6/U Non-Plenum, 18 AWG Solid Bare Copper Quad Shield Print OD Weight CABLE SPECIFICATIONS Description Type RG 6/U Non-Plenum, 18 AWG Solid Bare Copper Conductor 18 AWG Solid Bare Copper Dielectric Foam PE Shield Quad Shield Print OD Weight Jacket PVC Marking ROOM JACK A B C D E 0 1 2 3 4 5 6 7 8 9 RG6/U 1C18 Quad SHIELDED (UL) CMR OR CATVR OR C(UL) CMG Overall Diameter .272 Nom. Capacitance 16 pF/ft. Nom. Impedance 75 Ohms Velocity of Propagation 83% Temperature / Voltage 75 C / 300 Volt Cable Weight 32 Lbs/Mft. Flame Rating: N/A Agencies Approvals: Power Limited Circuit Cable, Class 2, Type CMR/CATVR/CMG, Per UL 13, C(UL), RoHS Compliant Sold in 500 ft. Spool or 1000 ft. Pull Box - Choose Below

Solid Tech Discs of Silence Isolation Feet - 4-Pack

By using an effective isolation medium and a small and stable physical body that upholds the apparatus, even the negative influence by the airborne vibrations (music) and internal vibrations of the apparatus are reduced. The criteria is to use an isolation medium that is as effective as possible, as close as possible to the apparatus, in order to avoid propagation of frame borne vibrations and resonances into the apparatus. Sold in sets of 4. A complement of four Discs of Silence can support a load of 100 lbs. with the standard tension springs, and 200 lbs. with the heavy-duty springs.

Solid Tech Feet of Silence Isolation Feet - 4-Pack

The Feet of Silence are Solid Tech's top-of-the-line isolation supports. They are available in a choice of black or chrome finishes and are sold in sets of 4. A complement of four Feet of Silence can support a load of 14 to 44 lbs. with the standard O-Rings, and from 44 to 110 lbs. with the heavy-duty O-rings.

Solid Tech Floor Protectors - 4-Pack

Solid Tech Floor Protectors protect the flooring beneath the audio rack while also helping to acoustically isolate the audio rack from the room. Floor Protectors are sold in 4-packs and are available in anodized black or silver finishes.

Solid Tech Isoclear Isolation Feet - 4-Pack

High-end performance made at affordable price. Our latest isolation feet that implements the documented and effective technology used in our sophisticated products now available at a price - performance ratio that outperforms most existing isolation devices. Sold in sets of 4. Isoclear comes with three internal springs capable of supporting 11 lbs. per foot. Isoclear can also be ordered with 16 additional springs allowing support up to 34 lbs. per foot.

Solid Tech Rack of Silence Reference Amplifier Stand

The Rack of Silence Reference version features a suspension kit amplifier shelf. It is with great joy and satisfaction we can announce that the Rack of Silence is into its second decade of production. Now more versatile, easy to assemble and taken to an even higher performance level. The Apparatus Supports made of extruded Aluminum are effectively resonance controlled by the fact that both sides are coated with acrylic glass and insulated from the wooden strut with a cork lined underside, even the top is cork lined and offers the apparatus a scratch resistant as well as a resonance-free surface to be placed on. The Formula 1 version (F1) with its carbon fiber reinforced beech wood struts is the ultimate choice for both sonics and looks. All ROS models are equipped with adjustable spikes for easy leveling and rigid connection to the floor.

Solid Tech Rack of Silence Regular Amplifier Stand

It is with great joy and satisfaction we can announce that the Rack of Silence is into its second decade of production. Now more versatile, easy to assemble and taken to an even higher performance level. The Apparatus Supports made of extruded Aluminum are effectively resonance controlled by the fact that both sides are coated with acrylic glass and insulated from the wooden strut with a cork lined underside, even the top is cork lined and offers the apparatus a scratch resistant as well as a resonance-free surface to be placed on. The Formula 1 version (F1) with its carbon fiber reinforced beech wood struts is the ultimate choice for both sonics and looks. All ROS models are equipped with adjustable spikes for easy leveling and rigid connection to the floor.

Solid Tech Rack of Silence Reference 3 Audio Rack

The Rack of Silence Reference version features a suspension kit for the top shelf. It is with great joy and satisfaction we can announce that the Rack of Silence is into its second decade of production. Now more versatile, easy to assemble and taken to an even higher performance level. The Apparatus Supports made of extruded Aluminum are effectively resonance controlled by the fact that both sides are coated with acrylic glass and insulated from the wooden strut with a cork lined underside, even the top is cork lined and offers the apparatus a scratch resistant as well as a resonance-free surface to be placed on. The Formula 1 version (F1) with its carbon fiber reinforced beech wood struts is the ultimate choice for both sonics and looks. All ROS models are equipped with adjustable spikes for easy leveling and rigid connection to the floor.

Solid Tech Rack of Silence Reference 4 Audio Rack

The Rack of Silence Reference version features a suspension kit for the top 2 shelves. It is with great joy and satisfaction we can announce that the Rack of Silence is into its second decade of production. Now more versatile, easy to assemble and taken to an even higher performance level. The Apparatus Supports made of extruded Aluminum are effectively resonance controlled by the fact that both sides are coated with acrylic glass and insulated from the wooden strut with a cork lined underside, even the top is cork lined and offers the apparatus a scratch resistant as well as a resonance-free surface to be placed on. The Formula 1 version (F1) with its carbon fiber reinforced beech wood struts is the ultimate choice for both sonics and looks. All ROS models are equipped with adjustable spikes for easy leveling and rigid connection to the floor.

Solid Tech Rack of Silence Regular 3 Audio Rack

Rack of Silence a modern classic. It is with great joy and satisfaction we can announce that the Rack of Silence is into its second decade of production. Now more versatile, easy to assemble and taken to an even higher performance level. The Apparatus Supports made of extruded Aluminum are effectively resonance controlled by the fact that both sides are coated with acrylic glass and insulated from the wooden strut with a cork lined underside, even the top is cork lined and offers the apparatus a scratch resistant as well as a resonance-free surface to be placed on. The Formula 1 version (F1) with its carbon fiber reinforced beech wood struts is the ultimate choice for both sonics and looks. All ROS models are equipped with adjustable spikes for easy leveling and rigid connection to the floor.

Solid Tech Rack of Silence Regular 4 Audio Rack

Solid Tech Radius Cinema 5 AV Rack

Solid Tech Radius Cinema 8 AV Rack

Solid Tech Radius Duo 2 Video Rack

Solid Tech Radius Duo 3 Video Rack

Solid Tech Radius Solo 1 Amplifier Stand

Solid Tech Radius Solo 2 Audio Rack

Pristine, natural wood shelves elegantly combine with sturdy, extruded aluminum pillars in perfect harmony. Radius Duo and Solo perfectly blend high performance and style. All Radius models have nicely countersunk aluminum top washers that allows a solid mounting. In order to facilitate the installation and for its excellent appearance, Radius Solo models 2 to 6 have a high quality and deeply chromed spirit level permanently mounted to the top shelf. All Radius models are available with wonderfully anodized columns in either black or silver.

Solid Tech Radius Solo 3 Audio Rack

Solid Tech Radius Solo 4 Audio Rack

Solid Tech Radius Solo 5 Audio Rack

Solid Tech Radius Speaker Stands - 24 Inch Pair

The Radius Loudspeaker stand is a perfect match to the Radius Solo and Duo Rack Line. It visually and esthetically harmonizes with rest of your Solid Tech equipment. The braced aluminum pillars can be filled with resonance damping material to further improve the performance of your speakers. The top shelf is made of transparent cast acrylic composite that has a simple resonance pattern, and visually disappears without interfering with the finish of your speakers.

Solid Tech Radius Speaker Stands - 28 Inch Pair

Solid Tech TT Turntable Shelf for Rack of Silence

The Solid Tech TT Turntable shelf is constructed with the same quality shelving material as their rack shelves. It is available in a choice of large or small sizes.

Speakercraft 70 Volt Transformer - Each

Features: 70.7 Volt Line Transformers for Commercial Speaker Applications Primary Terminations: 6 Long, Color-Coded, Pre-Stripped Wires Secondary Terminations: 6 Long, Color-Coded, Pre-Stripped Wires Specifications: Frequency Response: 40Hz - 15kHz +/-2dB Impedance: 8 Ohms or 4 Ohms Insertion Loss: 0.6dB Power Rating: 50 Watts Tap Settings: 10, 20 or 30 Watts

Speakercraft 8.2BAS In-Ceiling Subwoofer - Each

The BAS systems have built-in crossovers. This allows you to connect your in-ceiling or in-wall speakers to the BAS, which will direct the bass to the BAS and the higher frequencies to your other speakers. Features: 8 IMG Cone, Dual Voice Coil Woofer Front-Mounted Adjustable Low-Pass Crossover, 80Hz or 120Hz Front-Mounted 180Ú Phase Reversal Switch Front-Mounted 180Ú Phase Reversal Switch Recommended Amplifier - Bass Power 200 Specifications: Efficiency: 90dB 1W/1m Power Handling: 5 - 100 Watts Impedance: 8 Ohms Frequency Response: 30Hz - 120Hz or 30Hz - 80Hz, Depending on Switch Setting Diameter x Depth: 11 15/16 x 4 1/4 (303 mm x 108 mm) Cut-Out Diameter: 9 3/4 (248 mm) Weight: 6.4 lbs. (2.9 kg)

SpeakerCraft AB-S In-Wall A-B Switch

The Speakercraft AB-S is a bi-directional in-wall A-B switch that will allow you to either switch one amplifier signal to speakers A or speakers B, or switch between amplifier A or amplifier B signal to a pair of speakers. Fits in standard junction box Allows you to select between two pairs of speakers or two amplifiers Utilizes Speakercraft's simple connect system to speed up and simplify installation Available in 4 Decora colors.

SpeakerCraft AccuFit CRS7-One Enclosed In-Ceiling Speaker - Each

The AccuFit series of shallow depth full enclosed architectural speakers ensures that the drivers have the proper amount of air space to deliver the best sound performance regardless of the installation environment. This new line of technically advanced speakers will fit just about any installation application. Features: 7 Polypropylene Cone Woofer 3/4 Resin Coated Silk Dome Tweeter Sealed Steel Enclosure Timbre-Matched to All One Series Speakers Specifications: Efficiency: 92dB 1W/1m Power Handling: 5 - 100 Watts Impedance: 8 Ohms Frequency Response: 50Hz - 20kHz Diameter x Depth: 9 7/8 x 2 3/4 (251 mm x 70 mm) Cut-Out Diameter: 8 1/4 (210 mm)

SpeakerCraft AccuFit CRS7-Three Enclosed In-Ceiling Speaker - Each

The AccuFit series of shallow depth full enclosed architectural speakers ensures that the drivers have the proper amount of air space to deliver the best sound performance regardless of the installation environment. This new line of technically advanced speakers will fit just about any installation application. Features: 7 Aluminum Cone Woofer 3/4 Aluminum Dome Tweeter Front-Mounted Treble Switch Sealed Steel Enclosure Timbre-Matched to All Three Series Speakers Specifications: Efficiency: 92dB 1W/1m Power Handling: 125 Watts Impedance: 8 Ohms Frequency Response: 50Hz - 20kHz Diameter x Depth: 9 7/8 x 2 3/4 (251 mm x 70 mm) Cut-Out Diameter: 8 1/4 (210 mm)

Speakercraft AccuFit-DT7-One Enclosed Stereo In-Ceiling Speaker - Each

Plays both left and right audio channels in one speaker. Playing two channels out of a single speaker offers a critical solution in many situations. Bathrooms, hallways, laundry rooms and walk-in closets are all places where music would be welcome but the cost of the speakers and the installation or the space limitation may all be deal breakers. SpeakerCraft created the DT concept to address this challenge. The AccuFit series of shallow depth full enclosed architectural speakers ensures that the drivers have the proper amount of air space to deliver the best sound performance regardless of the installation environment. This new line of technically advanced speakers will fit just about any installation application. Features: 7 Polypropylene Cone Woofer Dual 3/4 Resin Coated Silk Dome Tweeters Sealed Steel Enclosure Timbre-Matched to All One Series Speakers Specifications: Efficiency: 91dB 1W/1m Power Handling: 5 - 100 Watts Impedance: 8 Ohms Frequency Response: 50Hz - 20kHz Diameter x Depth: 9 7/8 x 2 3/4 (251 mm x 70 mm) Cut-Out Diameter: 8 1/4 (210 mm)

Speakercraft AccuFit DT7-Three Enclosed In-Ceiling Speaker - Each

Plays both left and right audio channels in one speaker. Playing two channels out of a single speaker offers a critical solution in many situations. Bathrooms, hallways, laundry rooms and walk-in closets are all places where music would be welcome but the cost of the speakers and the installation or the space limitation may all be deal breakers. SpeakerCraft created the DT concept to address this challenge. The AccuFit series of shallow depth full enclosed architectural speakers ensures that the drivers have the proper amount of air space to deliver the best sound performance regardless of the installation environment. This new line of technically advanced speakers will fit just about any installation application. Features: 7 Aluminum Cone Woofer Dual 3/4 Aluminum Dome Tweeters Sealed Steel Enclosure Front-Mounted Treble Switch Timbre-Matched to All Three Series Speakers Specifications: Efficiency: 92dB 1W/1m Power Handling: 5 - 100 Watts Impedance: 8 Ohms Frequency Response: 50Hz - 20kHz Diameter x Depth: 9 7/8 x 2 3/4 (251 mm x 70 mm) Cut-Out Diameter: 8 1/4 (210 mm)

SpeakerCraft AccuFit Ultra Slim One Enclosed In-Ceiling Speaker - Each

The AccuFit series of shallow depth full enclosed architectural speakers ensures that the drivers have the proper amount of air space to deliver the best sound performance regardless of the installation environment. This new line of technically advanced speakers will fit just about any installation application. Features: Two 3 Custom Polypropylene Cone Woofer Two 3 Custom Polypropylene Cone Midrange Drivers 3/4 Resin Coated Silk Dome Tweeter Shallow-Depth, Ported, Magnetically Sealed Steel Enclosure Timbre-Matched to All One Series Speakers Specifications: Efficiency: 89dB 1W/1m Power Handling: 60 Watts Impedance: 8 Ohms Frequency Response: 90Hz - 20kHz Diameter x Depth: 9 15/16 x 2 (252 mm x 51 mm) Cut-Out Diameter: 8 1/4 (210 mm)

SpeakerCraft AccuFit Ultra Slim Three In-Ceiling Speaker - Each

The AccuFit series of shallow depth full enclosed architectural speakers ensures that the drivers have the proper amount of air space to deliver the best sound performance regardless of the installation environment. This new line of technically advanced speakers will fit just about any installation application. Features: Two 3 Custom Aluminum Cone Woofers Two 3 Custom Aluminum Cone Midrange Drivers 3/4 Aluminum Dome Tweeter Shallow-Depth, Ported, Magnetically Sealed Steel Enclosure Timbre-Matched to All Three Series Speakers Specifications: Efficiency: 90dB 1W/1m Power Handling: 60 Watts Impedance: 8 Ohms Frequency Response: 90Hz - 20kHz Diameter x Depth: 9 15/16 x 2 (252 mm x 51 mm) Cut-Out Diameter: 8 1/4 (210 mm)

Speakercraft AccuFit-IW7-One Enclosed In-Wall Speaker - Each

The AccuFit series of shallow-depth fully enclosed architectural speakers ensures that the drivers have the proper amount of air space to deliver the best sound performance regardless of the installation environment. This new line of technically advanced speakers will fit just about any installation application. Features: 7 Polypropylene Cone Woofer with Rubber Surround Pivoting 1 Resin Coated Silk Dome Tweeter Sealed Steel Enclosure Timbre-Matched to All One Series Speakers Specifications: Efficiency: 90dB 1W/1m Power Handling: 5 - 100 Watts Impedance: 8 Ohms Frequency Response: 40Hz - 20kHz +/-3dB Dimensions: (H x W x D) 14 1/2 x 9 7/8 x 2 3/4 (368 mm x 251 mm x 70 mm) Wall Cut-Out Dimensions: (H x W) 12 3/4 x 8 1/8 (324 mm x 206 mm)

Speakercraft AccuFit-IW7-Three Enclosed In-Wall Speaker - Each

The AccuFit series of shallow-depth fully enclosed architectural speakers ensures that the drivers have the proper amount of air space to deliver the best sound performance regardless of the installation environment. This new line of technically advanced speakers will fit just about any installation application. Features: 7 Aluminum Cone Woofer Pivoting 1 Aluminum Dome Tweeter Front-Mounted Treble Switch Allows For up to + 3dB Sealed Steel Enclosure Timbre-Matched to All Three Series Speakers Specifications: Efficiency: 91dB 1W/1m Power Handling: 5 - 125 Watts Impedance: 8 Ohms Frequency Response: 40Hz - 20kHz +/-3dB Dimensions: (H x W x D) 14 1/2 x 9 7/8 x 2 3/4 (368 mm x 251 mm x 70 mm) Wall Cut-Out Dimensions: (H x W) 12 3/4 x 8 1/8 (324 mm x 206 mm)

Speakercraft AcoustaCell Wall Dampening System - Each

Optional For All MT8, AIM LCR, AIM Cinema Dipole, AIM7 MT, MT6 and NEAT! LCR Series of Speakercraft In-Wall Speakers. When Installed behind the Speakers, It Forms a Precision Sonic Chamber The Entire AcoustaCell 8 System Installs through the Standard Speaker Wall Opening Allows the Woofer to Produce Deep Bass Frequencies Eliminates Reverse-phase Cancellation Caused by Sound Waves from the Rear of the Speaker Passing through the Drywall and Mixing with and Cancelling Those from the Front of the Speaker Virtually Eliminates Helmholtz Resonance and Standing Waves Subdues Out-of-Phase Drywall Resonance, Allowing Extended and Tighter Bass to Reach the Listener Layers of Mass-Loaded Dampening Material Reduce the Transmission of Sound into Adjacent Rooms Can be Used in Both New Construction and Retrofit Applications Dimensions: (H x W x D) 44 x 14 1/2 x 4 (1,118 mm x 368 mm x 102 mm)

Speakercraft AIM-Cinema-Dipole-Five In-Wall Speaker - Each

These speakers utilize the equivalent of an AIM LCR on a pivoting sub baffle for the mid bass, mid range and high frequencies. Below that are two high-performance 6-inch woofers on a separate stationary sub baffle to increase output and extend the low frequencies. Available in three models to fit your need, the AIM Cinema Series provides the incredible impact and dynamics necessary in today’s home theaters. Features: Two 5 1/4 Kevlar (R) Cone Woofers with Phase Plugs Two Pivoting 1 Aluminum/Magnesium Dome Tweeters Front-Mounted Switches Allow for up to +/-3dB of Bass and Treble Adjustment Front-Mounted Switches for Bipole or Dipole, QFX and Beam Steering Configuration Timbre-Matched to All Five Series Speakers Specifications: Bipole Efficiency: 89dB 1W/1m Dipole Efficiency: 82dB 1W/1m Power Handling: 5 - 100 Watts Impedance: 8 Ohms Compatible Frequency Response: 48Hz - 20kHz +/- 3dB Dimensions: (H x W x D) 17 7/16 x 9 1/4 x 33/8 (443 mm x 235 mm x 86 mm) Wall Cut-Out: (H x W) 15 5/8 x 7 1/2 (397 mm x 190 mm)

Speakercraft AIM-Cinema-Dipole-One In-Wall Speaker - Each

These speakers utilize the equivalent of an AIM LCR on a pivoting sub baffle for the mid bass, mid range and high frequencies. Below that are two high-performance 6-inch woofers on a separate stationary sub baffle to increase output and extend the low frequencies. Available in three models to fit your need, the AIM Cinema Series provides the incredible impact and dynamics necessary in today’s home theaters. Features: Two 5 1/4 Injection Molded Graphite Cone Woofers with Phase Plugs Two Pivoting 1 Silk Dome Tweeters Front-Mounted Switch for Bipole or Dipole Configuration Timbre-Matched to All One Series Speakers Specifications: Bipole Efficiency: 89dB 1W/1m Dipole Efficiency: 81dB 1W/1m Power Handling: 5 - 80 Watts Impedance: 8 Ohms Compatible Frequency Response: 55Hz - 20kHz +/- 3dB Dimensions: (H x W x D) 17 7/16 x 9 1/4 x 3 3/8 (443 mm x 235 mm x 86 mm) Wall Cut-Out: (H x W) 15 5/8 x 7 1/2 (397 mm x 190 mm)

Speakercraft AIM-Cinema-Dipole-Three In-Wall Speaker - Each

These speakers utilize the equivalent of an AIM LCR on a pivoting sub baffle for the mid bass, mid range and high frequencies. Below that are two high-performance 6-inch woofers on a separate stationary sub baffle to increase output and extend the low frequencies. Available in three models to fit your need, the AIM Cinema Series provides the incredible impact and dynamics necessary in today’s home theaters. Features: Two 5 1/4 Aluminum Cone Woofers with Phase Plugs Two Pivoting 1 Aluminum Dome Tweeters Front-Mounted Switches Allow for up to +/-3dB of Bass and Treble Adjustment Front-Mounted Switch for Bipole or Dipole, and QFX Configuration Timbre-Matched to All Three Series Speakers Specifications: Bipole Efficiency: 90dB 1W/1m Dipole Efficiency: 82dB 1W/1m Power Handling: 5 - 100 Watts Impedance: 8 Ohms Compatible Frequency Response: 50Hz - 20kHz +/- 3dB Dimensions: (H x W x D) 17 7/16 x 9 1/4 x 3 3/8 (443 mm x 235 mm x 86 mm) Wall Cut-Out: (H x W) 15 5/8 x 7 1/2 (397 mm x 190 mm)

Speakercraft AIM-Cinema-Five In-Wall Speaker - Each

These speakers utilize the equivalent of an AIM LCR on a pivoting sub baffle for the mid bass, mid range and high frequencies. Below that are two high-performance 6-inch woofers on a separate stationary sub baffle to increase output and extend the low frequencies. Available in three models to fit your need, the AIM Cinema Series provides the incredible impact and dynamics necessary in today’s home theaters. Features: Pivoting 1 Aluminum/Magnesium Dome Tweeter Two 5 1/4 Kevlar (R) Cone Woofers with Phase Plugs Two 6 Kevlar (R) Impregnated Paper Cone Woofers Front-Mounted Treble, Mid and Bass Adjustment Switches Bi-Amping Feature Timbre-Matched to All Five Series Speakers Specifications: Efficiency: 91dB 1W/1m Power Handling: 5 - 200 Watts Impedance: 8 Ohms Compatible Frequency Response: 35Hz - 20kHz +/- 3dB Dimensions: (H x W x D) 30 9/16 x 9 1/4 x 4 (776 mm x 235 mm x 102 mm) Wall Cut-Out: (H x W) 28 3/4 x 7 1/2 (730 mm x 191 mm)

Speakercraft AIM-Cinema-One In-Wall Speaker - Each

These speakers utilize the equivalent of an AIM LCR on a pivoting sub baffle for the mid bass, mid range and high frequencies. Below that are two high-performance 6-inch woofers on a separate stationary sub baffle to increase output and extend the low frequencies. Available in three models to fit your need, the AIM Cinema Series provides the incredible impact and dynamics necessary in today’s home theaters. Features: Pivoting 1 Silk Dome Tweeter Two 5 1/4 Injection Molded Graphite Cone Woofers with Phase Plugs Two 6 Kevlar (R) Impregnated Paper Cone Woofers Front-Mounted Bass Adjustment Switch Bi-Amping Feature Timbre-Matched to All One Series Speakers Specifications: Efficiency: 89dB 1W/1m Power Handling: 5 - 125 Watts Impedance: 8 Ohms Compatible Frequency Response: 40Hz - 20kHz +/-3dB Dimensions: (H x W x D) 30 9/16 x 9 1/4 x 4 (776 mm x 235 mm x 102 mm) Wall Cut-Out: (H x W) 28 3/4 x 7 1/2 (730 mm x 191 mm)

Speakercraft AIM-Cinema-Three In-Wall Speaker - Each

These speakers utilize the equivalent of an AIM LCR on a pivoting sub baffle for the mid bass, mid range and high frequencies. Below that are two high-performance 6-inch woofers on a separate stationary sub baffle to increase output and extend the low frequencies. Available in three models to fit your need, the AIM Cinema Series provides the incredible impact and dynamics necessary in today’s home theaters. Features: Pivoting 1 Aluminum Dome Tweeter Two 5 1/4 Aluminum Cone Woofers with Phase Plugs Two 6 Kevlar (R) Impregnated Paper Cone Woofers Front-Mounted Treble, Mid and Bass Adjustment Switches Bi-Amping Feature Timbre-Matched to All Three Series Speakers Specifications: Efficiency: 90dB 1W/1m Power Handling: 5 - 175 Watts Impedance: 8 Ohms Compatible Frequency Response: 39Hz - 20kHz +/- 3dB Dimensions: (H x W x D) 30 9/16 x 9 1/4 x 4 (776 mm x 235 mm x 102 mm) Wall Cut-Out: (H x W) 28 3/4 x 7 1/2 (730 mm x 191 mm)

Speakercraft AIM-LCR-1 In-Wall Speaker - Each

The AIM LCR series is a flush-mounted in-wall with dual 5 1/4 inch woofers in a fully pivoting baffle in a D’Apolito configuration bracketing a 1-inch pivoting tweeter. Designed to mount vertically or horizontally, the AIM LCRs will fit sideways in a standard stud bay. The AIM LCR's create a spectacular soundstage for music or film with the ability to produce every nuance of a performance. Their pivoting baffles allow them to be toed-in from left and right and adjusted vertically if in the horizontal position. Features: Pivoting Woofer Baffle Two 5 1/4 Injection Molded Graphite Cone Woofers with Phase Plugs Pivoting 1 Silk Dome Tweeter Timbre-Matched to All One Series Speakers Specifications: Efficiency: 89dB 1W/1m Power Handling: 5 - 80 Watts Impedance: 8 Ohms Frequency Response: 55Hz - 20kHz +/-3dB Dimensions: (H x W x D) 9 1/4 x 17 7/16 x 4 (235 mm x 443 mm x 102 mm) Wall Cut-Out: (H x W) 7 1/2 x 14 1/4 (190 mm x 362 mm)

Speakercraft AIM-LCR-3 In-Wall Speaker - Each

The AIM LCR series is a flush-mounted in-wall with dual 5 1/4 inch woofers in a fully pivoting baffle in a D’Apolito configuration bracketing a 1-inch pivoting tweeter. Designed to mount vertically or horizontally, the AIM LCRs will fit sideways in a standard stud bay. The AIM LCR's create a spectacular soundstage for music or film with the ability to produce every nuance of a performance. Their pivoting baffles allow them to be toed-in from left and right and adjusted vertically if in the horizontal position. Features: Pivoting Woofer Baffle Two 5 1/4 Aluminum/Magnesium Cone Woofers with Phase Plugs Pivoting 1 Aluminum/Magnesium Dome Tweeter Front-Mounted Switches Allow for up to +/- 3dB of Bass and Treble Adjustment Timbre-Matched to All Three/Four Series Speakers Specifications: Efficiency: 90dB 1W/1m Power Handling: 5 - 100 Watts Impedance: 8/6 Ohms, Depending on Switch Settings Frequency Response: 50Hz - 20kHz +/-3dB Dimensions: (H x W x D) 9 1/4 x 17 7/16 x 4 (235 mm x 443 mm x 102 mm) Wall Cut-Out: (H x W) 7 1/2 x 14 1/4 (190 mm x 362 mm)

Speakercraft AIM-LCR-5 In-Wall Speaker - Each

The AIM LCR series is a flush-mounted in-wall with dual 5 1/4 inch woofers in a fully pivoting baffle in a D’Apolito configuration bracketing a 1-inch pivoting tweeter. Designed to mount vertically or horizontally, the AIM LCRs will fit sideways in a standard stud bay. The AIM LCR's create a spectacular soundstage for music or film with the ability to produce every nuance of a performance. Their pivoting baffles allow them to be toed-in from left and right and adjusted vertically if in the horizontal position. Features: Pivoting Woofer Baffle Two 5 1/4 Kevlar Cone Woofers with Phase Plugs Pivoting 1 Aluminum/Magnesium Dome Tweeter Front-Mounted Switches Allow for up to +/-3dB of Bass and Treble Adjustment Timbre-Matched to All Five Series Speakers Specifications: Efficiency: 91dB 1W/1m Power Handling: 5 - 100 Watts Impedance: 8/6 Ohms, Depending on Switch Settings Frequency Response: 48Hz - 20kHz +/-3dB Dimensions: (H x W x D) 9 1/4 x 17 7/16 x 4 (235 mm x 443 mm x 102 mm) Wall Cut-Out: (H x W) 7 1/2 x 14 1/4 (190 mm x 362 mm)

Speakercraft AIM-LCR3-Five Mini In-Wall Speaker - Each

The AIM LCR3 series is a flush-mounted in-wall with dual 3 inch woofers in a fully pivoting baffle in a D’Apolito configuration bracketing a 3/4 inch pivoting tweeter. Designed to mount vertically or horizontally, the AIM LCRs will fit sideways in a standard stud bay. The AIM LCR's create a spectacular soundstage for music or film with the ability to produce every nuance of a performance. Their pivoting baffles allow them to be toed-in from left and right and adjusted vertically if in the horizontal position. Features: Pivoting Woofer Baffle Two 3 Kevlar (R) Cone Woofers with Phase Plugs Pivoting 3/4 Aluminum/Magnesium Dome Tweeter Front-Mounted 2-Position Treble Adjustment Switch Timbre-Matched to All Five Series Speakers Specifications: Efficiency: 86dB 1W/1m Power Handling: 5 - 60 Watts Impedance: 8 Ohms Compatible Frequency Response: 60Hz - 20kHz +/- 3dB Dimensions: (H x W x D) 10 x 5 3/4 x 3 (254 mm x 146 mm x 76 mm) Wall Cut-Out: (H x W) 9 x 4 3/4 (227 mm x 120 mm) .

Speakercraft AIM-LCR3-One Mini In-Wall Speaker - Each

The AIM LCR3 series is a flush-mounted in-wall with dual 3 inch woofers in a fully pivoting baffle in a D’Apolito configuration bracketing a 3/4 inch pivoting tweeter. Designed to mount vertically or horizontally, the AIM LCRs will fit sideways in a standard stud bay. The AIM LCR's create a spectacular soundstage for music or film with the ability to produce every nuance of a performance. Their pivoting baffles allow them to be toed-in from left and right and adjusted vertically if in the horizontal position. Features: Pivoting Woofer Baffle Two 3 Injection Molded Graphite Cone Woofers with Phase Plugs Pivoting 3/4 Silk Dome Tweeter Timbre-Matched to All One Series Speakers Specifications: Efficiency: 85dB 1W/1m Power Handling: 5 - 60 Watts Impedance: 8 Ohms Compatible Frequency Response: 80Hz - 20kHz +/- 3dB Dimensions: (H x W x D) 10 x 5 3/4 x 3 (254 mm x 146 mm x 76 mm) Wall Cut-Out: (H x W) 9 x 4 3/4 (227 mm x 120 mm)

Speakercraft AIM-LCR3-Three Mini In-Wall Speaker - Each

The AIM LCR3 series is a flush-mounted in-wall with dual 3 inch woofers in a fully pivoting baffle in a D’Apolito configuration bracketing a 3/4 inch pivoting tweeter. Designed to mount vertically or horizontally, the AIM LCRs will fit sideways in a standard stud bay. The AIM LCR's create a spectacular soundstage for music or film with the ability to produce every nuance of a performance. Their pivoting baffles allow them to be toed-in from left and right and adjusted vertically if in the horizontal position. Features: Pivoting Woofer Baffle Two 3 Aluminum Cone Woofers with Phase Plugs Pivoting 3/4 Aluminum Dome Tweeter Front-Mounted 2-Position Treble Adjustment Switch Timbre-Matched to All Three Series Speakers Specifications: Efficiency: 86dB 1W/1m Power Handling: 5 - 60 Watts Impedance: 8 Ohms Compatible Frequency Response: 78Hz - 20kHz +/- 3dB Dimensions: (H x W x D) 10 x 5 3/4 x 3 (254 mm x 146 mm x 76 mm) Wall Cut-Out: (H x W) 9 x 4 3/4 (227 mm x 120 mm)

Speakercraft AIM-MDU-One Surface Mount Speaker - Each

The Speakercraft AIM MDU can be surface mounted virtually anywhere and is designed to attach to a single-gang electrical box. Features: 4 IMG Cone Woofer 1 Silk Dome Tweeter Tuned and Ported Enclosure Timbre-Matched to All One Series Speakers Specifications: Efficiency: 87dB 1W/1m Power Handling: 5 - 60 Watts Impedance: 8 Ohms Compatible Frequency Response: 78Hz - 20kHz +/-3dB Dimensions: (H x W x D) 4 25/32 x 7 5/16 x 4 3/16 (122 mm x 186 mm x 106 mm) Bracket Dimensions: (H) 9 1/2 (241 mm) Can be mounted onto a single gang electrical box

Speakercraft Boomtomb Outdoor Subwoofer

The Speakercraft Boomtomb is a 10" In-Ground Subwoofer that is buried in the ground with only a port tube exposed. Specifications: 10" In-Ground Subwoofer System Weather Resistant Poly Resin Enclosure buried Enclosure with External Hooded Port Sensitivity: 90dB 1W/1m Power Handling: 250 Watts Impedance: 4 Ohms Frequency Response: 30 Hz - 200 Hz Dimensions: 15 3/8 H x 24 5/8 W x 12 1/2 D Port Tube and Cap Height: 13 3/8

Speakercraft Roots Center Channel Speaker

The new Speakercraft Roots Center speaker feature two 4 1/2-inch full range cone woofers and a high gloss piano finish in your choice of black or white. Specifications: 2 x 4 1/2 inch Full Range Paper Cone Woofer 3/4 inch Silk Dome Tweeter High Gloss Piano Finish, Available in Black and White (Choose Below) 1/4 inch- 20 Insert for Wall Mounting Custom Tuned Enclosures for Accurate Bass Response

Speakercraft Roots-650 Bookshelf Speakers - Pair

The new Speakercraft Roots-650 bookshelf speakers feature 6 1/2-inch full range cone woofers and a high gloss piano finish in your choice of black or white. Specifications: 6 1/2 inch Full Range Paper Cone Woofer 1/2 inch Silk Dome Tweeter High Gloss Piano Finish, Available in Black and White (Choose Below) 1/4 inch- 20 Insert for Wall Mounting Custom Tuned Enclosures for Accurate Bass Response Sold in Pairs

Speakercraft Roots-350 Bookshelf Speakers - Pair

The new Speakercraft Roots-350 bookshelf speakers feature 3 1/2-inch full range cone woofers and a high gloss piano finish in your choice of black or white. Specifications: 3 1/2 inch Full Range Paper Cone Woofer 1/2 inch Silk Dome Tweeter High Gloss Piano Finish, Available in Black and White (Choose Below) 1/4 inch- 20 Insert for Wall Mounting Custom Tuned Enclosures for Accurate Bass Response Sold in Pairs

Speakercraft Roots-450 Bookshelf Speakers - Pair

The new Speakercraft Roots-450 bookshelf speakers feature 4 1/2-inch full range cone woofers and a high gloss piano finish in your choice of black or white. Specifications: 4 1/2 inch Full Range Paper Cone Woofer 1/2 inch Silk Dome Tweeter High Gloss Piano Finish, Available in Black and White (Choose Below) 1/4 inch- 20 Insert for Wall Mounting Custom Tuned Enclosures for Accurate Bass Response Sold in Pairs

Speakercraft AIM-Wide-Five In-Ceiling Speaker - Each

The AIM WIDE has the same footprint and woofers as the AIM 8. However, the rest of the speaker is a huge departure from that familiar format. A unique dual mid-tweeter module is mounted directly over the woofer with two 2-inch dome midrange drivers and two 1-inch dome tweeters facing 70 degrees off access from each other. The result is ultra-wide dispersion with tremendous fidelity. Features: Pivoting 8 Kevlar (R) Cone Woofer Dual 2 Kevlar Cone Midrange Drivers Dual 3/4 Aluminum/Magnesium Dome Tweeters Front-Mounted Ambient/Wide and Treble Switches Timbre-Matched to All Five Series Speakers Specifications: Efficiency: 91dB 1W/1m Power Handling: 5 - 150 Watts Impedance: 8 Ohms Compatible Frequency Response: 33Hz - 20kHz Diameter x Depth: 11 7/16 x 6 1/2 (291 mm x 165 mm) Cut-Out Diameter: 9 3/4 (248 mm)

Speakercraft AIM-Wide-One In-Ceiling Speaker - Each

The AIM WIDE One has the same footprint and woofers as the AIM 8. However, the rest of the speaker is a huge departure from that familiar format. A unique dual mid-tweeter module is mounted directly over the woofer with two 2-inch dome midrange drivers and two 1-inch dome tweeters facing 70 degrees off access from each other. The result is ultra-wide dispersion with tremendous fidelity. Features: Pivoting 8 IMG Cone Woofer Dual 2 IMG Cone Midrange Drivers Dual 3/4 Silk Dome Tweeter Front-Mounted Ambient/Wide Switch Timbre-Matched to All One Series Speakers Specifications: Efficiency: 88dB 1W/1m Power Handling: 5 - 125 Watts Impedance: 8 Ohms Compatible Frequency Response: 40Hz - 20kHz Diameter x Depth: 11 7/16 x 6 1/2 (291 mm x 165 mm) Cut-Out Diameter: 9 3/4 (248 mm)

Speakercraft AIM-Wide-Three In-Ceiling Speaker - Each

The AIM WIDE Three has the same footprint and woofers as the AIM 8. However, the rest of the speaker is a huge departure from that familiar format. A unique dual mid-tweeter module is mounted directly over the woofer with two 2-inch dome midrange drivers and two 1-inch dome tweeters facing 70 degrees off access from each other. The result is ultra-wide dispersion with tremendous fidelity. Features: Pivoting 8 Aluminum Cone Woofer Dual 2 Aluminum Cone Midrange Drivers Dual 3/4 Aluminum Dome Tweeters Front-Mounted Ambient/Wide and Treble Switches Timbre-Matched to All Three Series Speakers Specifications: Efficiency: 91dB 1W/1m Power Handling: 5 - 150 Watts Impedance: 8 Ohms Compatible Frequency Response: 37Hz - 20kHz Diameter x Depth: 11 7/16 x 6 1/2 (291 mm x 165 mm) Cut-Out Diameter: 9 3/4 (248 mm)

Speakercraft AIM5-One Directional In-Ceiling Speaker - Each

The SpeakerCraft tradition of innovative design, combined with one of the most extensive engineering efforts in this industry's history, has led to the creation of the patented AIM series of fully directional in-ceiling loudspeakers. Each model can be entirely pivoted towards the listener while remaining discretely recessed behind a flush-mounted grille. If listening position or tastes change, the speaker can be easily aimed in another direction with a simple push of the hand. SpeakerCraft innovation, excellence in engineering, and American made quality make the AIM5 series one of the most exceptional loudspeakers ever. Features: Pivoting and Rotating 5 1/4 Injection Molded Polypropylene Cone Woofer Pivoting 3/4 Treated Silk Dome Tweeter Timbre-Matched to All One Series Speakers Specifications: Efficiency: 88 dB 1W/1m Power Handling: 5 - 75 Watts Impedance: 8 Ohms Frequency Response: 55Hz - 20kHz +/- 3dB Diameter x Depth: 8 3/16 x 4 1/2 (208 mm x 114 mm) Cut-Out Diameter: 6 5/8 (168 mm)

Speakercraft AIM5-Three Directional In-Ceiling Speaker - Each

The SpeakerCraft tradition of innovative design, combined with one of the most extensive engineering efforts in this industry's history, has led to the creation of the patented AIM series of fully directional in-ceiling loudspeakers. Each model can be entirely pivoted towards the listener while remaining discretely recessed behind a flush-mounted grille. If listening position or tastes change, the speaker can be easily aimed in another direction with a simple push of the hand. SpeakerCraft innovation, excellence in engineering, and American made quality make the AIM5 series one of the most exceptional loudspeakers ever. Features: Pivoting and Rotating 5 1/4 Aluminum Cone Woofer Pivoting 3/4 Aluminum Dome Tweeter Timbre-Matched to All Three Series Speakers Front-Mounted Bass and Treble Equalization Switches Specifications: Efficiency: 89dB 1W/1m Power Handling: 5 - 100 Watts Impedance: 8/6/4 Ohms, Depending on Switch Settings Frequency Response: 50Hz - 20kHz +/- 3dB Diameter x Depth: 8 3/16 x 4 1/2 (208 mm x 114 mm) Cut-Out Diameter: 6 5/8 (168 mm)

Speakercraft Aim7-DT-One Stereo In-Ceiling Speaker - Each

Plays both left and right audio channels in one speaker. Playing two channels out of a single speaker offers a critical solution in many situations. Bathrooms, hallways, laundry rooms and walk-in closets are all places where music would be welcome but the cost of the speakers and the installation or the space limitation may all be deal breakers. SpeakerCraft created the DT concept to address this challenge. Features: Pivoting 7 Polypropylene Cone Woofer with Dual Voice Coil and Rubber Surround Dual 1 Resin Coated Silk Dome Tweeters Timbre-Matched to All One Series Speakers Specifications: Efficiency: 91dB 1W/1m Power Handling: 5 - 60 Watts Impedance: 8 Ohms Frequency Response: 55Hz - 20kHz Diameter x Depth: 9 13/16 x 4 1/2 (249 mm x 114 mm) Cut-Out Diameter: 8 1/4 (210 mm)

Speakercraft AIM7-DT-Three Stereo In-Ceiling Speaker - Each

Plays both left and right audio channels in one speaker. Playing two channels out of a single speaker offers a critical solution in many situations. Bathrooms, hallways, laundry rooms and walk-in closets are all places where music would be welcome but the cost of the speakers and the installation or the space limitation may all be deal breakers. SpeakerCraft created the DT concept to address this challenge. Features: Pivoting 7 Aluminum Cone Woofer with Dual Voice Coil and Rubber Surround Dual Pivoting 1 Aluminum Dome Tweeters Timbre-Matched to All Three Series Speakers Front-Mounted Bass and Treble Equalization Switches Specifications: Efficiency: 92dB 1W/1m Power Handling: 5 - 60 Watts Impedance: 8 Ohms Frequency Response: 50Hz - 20kHz Diameter x Depth: 9 13/16 x 4 3/4 (249 mm x 121 mm) Cut-Out Diameter: 8 1/4 (210 mm)

Speakercraft AIM7-MT-One In-Wall Speakers - Pair

Building on the success of the AIM LCR, the AIM7 MT series is also an in-wall speaker with a fully pivoting baffle, allowing the installer to toe-in the left and right speaker for better stereo imaging. They feature 7-inch woofers, a substantial improvement over the 6-inch driver in the original MT6, as well as an offset, independently pivoting tweeter. They play louder, deeper, and with more authority than the MT6 and at the exact same price. Features: 7 Polypropylene Cone Woofer with Rubber Surround Pivoting 1 Silk Dome Tweeter Timbre-Matched to All One Series Speakers Specifications: Efficiency: 92dB 1W/1m Power Handling: 5 - 100 Watts Impedance: 6 Ohms Frequency Response: 40Hz - 20kHz +/- 3dB Dimensions: (H x W x D) 14 1/2 x 9 7/8 x 4 (at Full Pivot) (368 mm x 251 mm x 102 mm) Wall Cut-Out Dimensions: (H x W) 12 3/4 x 8 1/16 (324 mm x 206 mm)

Speakercraft AIM7-MT-Three In-Wall Speakers - Pair

Building on the success of the AIM LCR, the AIM7 MT series is also an in-wall speaker with a fully pivoting baffle, allowing the installer to toe-in the left and right speaker for better stereo imaging. They feature 7-inch woofers, a substantial improvement over the 6-inch driver in the original MT6, as well as an offset, independently pivoting tweeter. They play louder, deeper, and with more authority than the MT6 and at the exact same price. Features: 7 Aluminum Cone Woofer with Dual Voice Coil and Rubber Surround w/ Phase Plug Pivoting 1 Aluminum Dome Tweeter Front-Mounted Switches Allow for up to +/-3dB of Bass and Treble Adjustment Timbre-Matched to All Three Series Speakers Specifications: Efficiency: 91dB 1W/1m Power Handling: 5 - 125 Watts Impedance: 8/6 Ohms Frequency Response: 40Hz - 20kHz +/-3dB Dimensions: (H x W x D) 14 1/2 x 9 7/8 x 4 (at Full Pivot) (368 mm x 251 mm x 102 mm) Wall Cut-Out Dimensions: (H x W) 12 3/4 x 8 1/16 (324 mm x 206 mm)

Speakercraft AIM7-MT-Two In-Wall Speakers - Pair

Building on the success of the AIM LCR, the AIM7 MT series is also an in-wall speaker with a fully pivoting baffle, allowing the installer to toe-in the left and right speaker for better stereo imaging. They feature 7-inch woofers, a substantial improvement over the 6-inch driver in the original MT6, as well as an offset, independently pivoting tweeter. They play louder, deeper, and with more authority than the MT6 and at the exact same price. Features: 7 Glass Composite Cone Woofer with Rubber Surround Pivoting 1 Silk Dome Tweeter Front-Mounted Switch Allows for up to +/-3dB of Treble Adjustment Timbre-Matched to All Two Series Speakers Specifications: Efficiency: 90dB 1W/1m Power Handling: 5 - 125 Watts Impedance: 6 Ohms Frequency Response: 40Hz - 20kHz +/- 3dB Dimensions: (H x W x D) 14 1/2 x 9 7/8 x 4 (at Full Pivot) (368 mm x 251 mm x 102 mm) Wall Cut-Out Dimensions: (H x W) 12 3/4 x 8 1/16 (324 mm x 206 mm)

Speakercraft AIM7-Five Directional In-Ceiling Speaker - Each

The SpeakerCraft tradition of innovative design, combined with one of the most extensive engineering efforts in this industry's history, has led to the creation of the patented AIM series of fully directional in-ceiling loudspeakers. Each model can be entirely pivoted towards the listener while remaining discretely recessed behind a flush-mounted grille. If listening position or tastes change, the speaker can be easily aimed in another direction with a simple push of the hand. SpeakerCraft innovation, excellence in engineering, and American made quality make the AIM7 series one of the most exceptional loudspeakers ever. Features: Pivoting and Rotating 7 Kevlar (R) Cone Woofer Pivoting 1 Magnesium/Aluminum Dome Tweeter Timbre-Matched to All Five Series Speakers Front-Mounted Bass and Treble Equalization Switches Specifications: Efficiency: 91dB 1W/1m Power Handling: 5 - 150 Watts Impedance: 8/6/4 Ohms, Depending on Switch Settings Frequency Response: 35Hz - 20kHz +/-3dB Diameter x Depth: 9 7/8 x 5 1/8 (251 mm x 130 mm) Cut-Out Diameter: 8 1/4 (210 mm)

Speakercraft AIM7-Three Directional In-Ceiling Speaker - Each

The SpeakerCraft tradition of innovative design, combined with one of the most extensive engineering efforts in this industry's history, has led to the creation of the patented AIM series of fully directional in-ceiling loudspeakers. Each model can be entirely pivoted towards the listener while remaining discretely recessed behind a flush-mounted grille. If listening position or tastes change, the speaker can be easily aimed in another direction with a simple push of the hand. SpeakerCraft innovation, excellence in engineering, and American made quality make the AIM7 series one of the most exceptional loudspeakers ever. Features: Pivoting and Rotating 7 Aluminum Cone Woofer Pivoting 1 Aluminum Dome Tweeter Timbre-Matched to All Three Series Speakers Front-Mounted Bass and Treble Equalization Switches Specifications: Efficiency: 91dB 1W/1m Power Handling: 5 - 125 Watts Impedance: 8/6/4 Ohms, Depending on Switch Settings Frequency Response: 40Hz - 20kHz +/-3dB Diameter x Depth: 9 7/8 x 5 1/8 (251 mm x 130 mm) Cut-Out Diameter: 8 1/4 (210 mm)

Speakercraft AIM7-Two Directional In-Ceiling Speaker - Each

The SpeakerCraft tradition of innovative design, combined with one of the most extensive engineering efforts in this industry's history, has led to the creation of the patented AIM series of fully directional in-ceiling loudspeakers. Each model can be entirely pivoted towards the listener while remaining discretely recessed behind a flush-mounted grille. If listening position or tastes change, the speaker can be easily aimed in another direction with a simple push of the hand. SpeakerCraft innovation, excellence in engineering, and American made quality make the AIM series one of the most exceptional loudspeakers ever. Features: Pivoting and Rotating 7 Resin Reinforced Fiberglass Cone Woofer Pivoting 1 Silk Dome Tweeter Timbre-Matched to All Two Series Speakers Front-Mounted Treble Equalization Switch Specifications: Efficiency: 90dB 1W/1m Power Handling: 5 - 125 Watts Impedance: 8 Ohms Frequency Response: 40Hz - 20kHz +/-3dB Diameter x Depth: 9 7/8 x 5 1/8 (251 mm x 130 mm) Cut-Out Diameter: 8 1/4 (210 mm)

Speakercraft AIM8-DT-One Stereo In-Ceiling Speaker - Each

Plays both left and right audio channels in one speaker. Playing two channels out of a single speaker offers a critical solution in many situations. Bathrooms, hallways, laundry rooms and walk-in closets are all places where music would be welcome but the cost of the speakers and the installation or the space limitation may all be deal breakers. SpeakerCraft created the DT concept to address this challenge. Features: Pivoting 8 Polypropylene Cone Woofer with Dual Voice Coil and Rubber Surround Dual 1 Resin Coated Silk Dome Tweeters Timbre-Matched to All One Series Speakers Specifications: Efficiency: 91dB 1W/1m Power Handling: 80 Watts Impedance: 8 Ohms Frequency Response: 45Hz - 20kHz Diameter x Depth: 11 7/16 x 5 3/4 (291 mm x 147 mm) Cut-Out Diameter: 9 3/4 (248 mm)

Speakercraft AIM8-DT-Three Stereo In-Ceiling Speaker - Each

Plays both left and right audio channels in one speaker. Playing two channels out of a single speaker offers a critical solution in many situations. Bathrooms, hallways, laundry rooms and walk-in closets are all places where music would be welcome but the cost of the speakers and the installation or the space limitation may all be deal breakers. SpeakerCraft created the DT concept to address this challenge. Features: Pivoting 8 Aluminum Cone Woofer with Dual Voice Coil and Rubber Surround Dual Pivoting 1 Aluminum Dome Tweeters Timbre-Matched to All Three Series Speakers Front-Mounted Bass and Treble Equalization Switches Specifications: Efficiency: 92dB 1W/1m Power Handling: 100 Watts Impedance: 8 Ohms Frequency Response: 40Hz - 20kHz Diameter x Depth: 11 7/16 x 5 3/4 (291 mm x 147 mm) Cut-Out Diameter: 9 3/4 (248 mm)

Speakercraft AIM8-Five Directional In-Ceiling Speaker - Each

The SpeakerCraft tradition of innovative design, combined with one of the most extensive engineering efforts in this industry's history, has led to the creation of the patented AIM series of fully directional in-ceiling loudspeakers. Each model can be entirely pivoted towards the listener while remaining discretely recessed behind a flush-mounted grille. If listening position or tastes change, the speaker can be easily aimed in another direction with a simple push of the hand. SpeakerCraft innovation, excellence in engineering, and American made quality make the AIM series one of the most exceptional loudspeakers ever. Features: Pivoting and Rotating 8 Kevlar (R) Cone Woofer Pivoting 1 Aluminum/Magnesium Dome Tweeter Front-Mounted Switches Allow for up to +/-3dB of Bass and Treble Adjustment Accu-Grille Dramatically Reduces Unwanted Acoustic Reflections Timbre-Matched to All Five Series Speakers Specifications: Efficiency: 91dB 1W/1m Power Handling: 5 - 150 Watts Impedance: 8/6/4 Ohms, Depending on Switch Settings Frequency Response: 33Hz - 20kHz +/-2dB Diameter x Depth: 11 7/16 x 5 3/4 (291 mm x 146 mm) Cut-Out Diameter: 9 3/4 (248 mm)

Speakercraft AIM8-One Directional In-Ceiling Speaker - Each

The SpeakerCraft tradition of innovative design, combined with one of the most extensive engineering efforts in this industry's history, has led to the creation of the patented AIM series of fully directional in-ceiling loudspeakers. Each model can be entirely pivoted towards the listener while remaining discretely recessed behind a flush-mounted grille. If listening position or tastes change, the speaker can be easily aimed in another direction with a simple push of the hand. SpeakerCraft innovation, excellence in engineering, and American made quality make the AIM series one of the most exceptional loudspeakers ever. Features: Pivoting and Rotating 8 Injection Molded Polypropylene Cone Woofer Pivoting 1 Treated Silk Dome Tweeter Timbre-Matched to All One Series Speakers Specifications: Efficiency: 88dB 1W/1m Power Recommendations: 5 - 100 watts (undistorted) Impedance: 8 OHMS Frequency Response: 40Hz - 20kHz +/-2dB Diameter x Depth: 11-15/16 x 5-1/2 Cut-out Diameter: 9-3/4

Speakercraft AIM8-Three Directional In-Ceiling Speaker - Each

The SpeakerCraft tradition of innovative design, combined with one of the most extensive engineering efforts in this industry's history, has led to the creation of the patented AIM series of fully directional in-ceiling loudspeakers. Each model can be entirely pivoted towards the listener while remaining discretely recessed behind a flush-mounted grille. If listening position or tastes change, the speaker can be easily aimed in another direction with a simple push of the hand. SpeakerCraft innovation, excellence in engineering, and American made quality make the AIM8 series one of the most exceptional loudspeakers ever. Features: Pivoting and Rotating 8 Aluminum Cone Woofer Pivoting 1 Aluminum Dome Tweeter Front-Mounted Switches Allow for up to +/-3dB of Bass and Treble Adjustment Accu-Grille Dramatically Reduces Unwanted Acoustic Reflections Timbre-Matched to All Three Series Speakers Specifications: Efficiency: 89dB 1W/1m Power Handling: 5 - 150 Watts Impedance: 8/6/4 Ohms, Depending on Switch Settings Frequency Response: 37Hz - 20kHz +/-2dB Diameter x Depth: 11 7/16 x 5 3/4 (291 mm x 146 mm) Cut-Out Diameter: 9 3/4 (248 mm)

Speakercraft AIM8-Two Directional In-Ceiling Speaker - Each

The SpeakerCraft tradition of innovative design, combined with one of the most extensive engineering efforts in this industry's history, has led to the creation of the patented AIM series of fully directional in-ceiling loudspeakers. Each model can be entirely pivoted towards the listener while remaining discretely recessed behind a flush-mounted grille. If listening position or tastes change, the speaker can be easily aimed in another direction with a simple push of the hand. SpeakerCraft innovation, excellence in engineering, and American made quality make the AIM series one of the most exceptional loudspeakers ever. Features: Pivoting and Rotating 8 Resin Reinforced Fiberglass Cone Woofer Pivoting 1 Treated Silk Dome Tweeter Front-Mounted Switch Allows for up to +/-3dB of Treble Adjustment Timbre-Matched to All Two Series Speakers Specifications: Efficiency: 89dB 1W/1m Power Handling: 5 - 125 Watts Impedance: 8 Ohms Frequency Response: 40Hz - 20kHz +/-2dB Diameter x Depth: 11 7/16 x 5 3/4 (291 mm x 146 mm) Cut-Out Diameter: 9 3/4 (248 mm)

Speakercraft ASM74300 Sound Enclosure for AIM LCR3 In-Wall Speakers

Speakercraft Sound Enclosures are optional and are intended for pre-drywall applications and provide a back-box for Speakercraft in-ceiling and in-wall speakers. These must be installed BEFORE drywall. They increase bass response, prevent audio from entering adjoining rooms, and provide fire rated enclosure (UL standard ASTME E-119). Designed for 16" center studs. Fits all AIM LCR3 series in-wall speakers.

Speakercraft ASM81700 Sound Enclosure for AIM7MT In-Wall Speakers

Speakercraft ASM84600 Sound Enclosure for AIM LCR In-Wall Speakers

Speakercraft ASM90503 Sound Enclosure for 5 Inch In-Ceiling Speakers

Speakercraft ASM90601 Sound Enclosure for MT6 In-Wall Speakers

Speakercraft ASM70800 Sound Enclosure for AIM Wide

Speakercraft ASM82500 Sound Enclosure for AIM5 In-Ceiling Speakers

Speakercraft ASM90508 Enclosure for 6 and 7 Inch In-Ceiling Speakers

Speakercraft ASM90509 Sound Enclosure for CSS6 In-Ceiling Speakers

Speakercraft ASM90901 Sound Enclosure for 8 Inch In-Ceiling Speakers

Speakercraft BKT81700 Bracket for AIM7MT and IW7 Series Speakers